G200
www.vishay.com Vishay Draloric
Revision: 03-Aug-12 1Document Number: 21002
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Axial Vitreous Wirewound Resistors
FEATURES
• Complete welded construction
• Vitreous coating
• Enhanced humidity protection
• TCR 100 ppm/K to 180 ppm/K
• CECC 40201-801 approved version available
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Material categorization: For definitions please see
www.vishay.com/doc?99912
Notes
(1) Resistance value to be selected for ± 10 % tolerance from E12 and for ± 5 % from E24
(2) 1 % on request
Note
(3) See “Packaging Table”
STANDARD ELECTRICAL SPECIFICATIONS
MODEL SIZE
POWER RATING
W
P40 °C
LIMITING VOLTAGE
V
RESISTANCE RANGE (1)
TCR = 100 ppm/K to 180 ppm/K
TOLERANCE (2)
± %
G202 G220414 4 200 0.10 to 10K 10, 5, 2
G204 G240719 7 350 0.10 to 39K 10, 5, 2
G206 G260933 13 500 0.15 to 68K 10, 5, 2
G207 G270947 17 650 0.20 to 120K 10, 5, 2
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: G24071933902J4B000
MODEL TCR/MATERIAL VALUE TOLERANCE
CODE
PACKAGING
CODE SPECIAL
G220414 = G202
G240719 = G204
G260933 = G206
G270947 = G207
3 = Class 3
WM 110
100 to 180 ppm/K
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 10.0 %
(3) The 5 digit BV number will be
encoded using a 36 character
code. This code contains numbers
0...9 and letters A...Z
(36 characters total) and allows
to encode at least 46 655 five
digit BV numbers.
000 = Standard
Product Description: G204 39K 5 % AB G73
G204 39K 5 % AB G73
MODEL VALUE TOLERANCE
CODE
PACKAGING
DESCRIPTION (3)
0719 390324 J4B 02G 00
G200
www.vishay.com Vishay Draloric
Revision: 03-Aug-12 2Document Number: 21002
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL SPECIFICATIONS FOR PARTS QUALIFIED ACCORDING TO CECC 40201-801
MODEL
STYLE
ACC. TO
CECC40201-801
POWER RATING
W
P25 °C
POWER RATING
W
P40 °C
LIMITING
VOLTAGE
V
RESISTANCE RANGE (1)
TCR = 100 ppm/K to 180 ppm/K
TOLERANCE (2)
± %
G202 FDG 3.5 3.0 100 0.10 to 10K 5, 2
G204 FDK 6.5 5.5 200 0.10 to 39K 5
0.10 to 22K 2
G206 FDP 11.5 10 350 0.15 to 68K 5
0.15 to 33K 2
PART NUMBER AND PRODUCT DESCRIPTION FOR CECC 40201-801 QUALIFIED PART
Part Number: FDPCEE031809JLA000
MODEL TCR/MATERIAL VALUE TOLERANCE
CODE
PACKAGING
CODE SPECIAL
FDGCEE0
= G202
FDKCEE0
= G204
FDPCEE0
= G206
3 = Class 3
WM 110
100 to 180 ppm/K
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 10.0 %
4C = Ammopack tape 73 mm, 500 pcs
7B = Ammopack tape 88 mm, 250 pcs
LA = Loose, 100 pcs
4A = Ammopack tape 73 mm, 100 pcs
F1 = Reel tape 73 mm, 1000 pcs
000 = Standard
Product Description: G206 18R 5 % LA CECC 40201-801
G206 18R 5 % LA CECC 40201-801
MODEL VALUE TOLERANCE
CODE
PACKAGING
DESCRIPTION VARIANT
PACKAGING TABLE
MODEL
TAPE/LEAD
LENGTH
(
mm
)
AMMO PACK REEL LOOSE
PCS PACKAGING
CODE
PACKAGING
DESCRIPTION PCS PACKAGING
CODE
PACKAGING
DESCRIPTION PCS PACKAGING
CODE
PACKAGING
DESCRIPTION
G202 53 500 2C AC G53 1000 D1 R1 G53
73 500 4C AC G73 1000 F1 R1 G73
G204
73 250 4B AB G73 500 FC RC G73
88 250 7B AB G88 500 IC RC G88
250 8B AB G88 CL
98 50 LD LD
200 LJ LJ
G206 107 100 LA LA
G207 120 100 LA LA
CEE0 1803DP JLA 09F 00
G200
www.vishay.com Vishay Draloric
Revision: 03-Aug-12 3Document Number: 21002
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS
For packaging dimensions see separate packaging dimensions page.
Notes
(1) The body diameter should be increased by 1 mm [0.039"] for ohmic values 10
(2) C according to IEC 60301
DERATING
TEMPERATURE RISE TEMPERATURE RISE
MODEL
DIMENSIONS in millimeters [inches]
Amax. Bmax.(1) C (2) DD1
MASS
(g)
G202 13 [0.512] 5.7 [0.224] 0.8 [0.031] 53 ± 1 [2.087 ± 0.039] 1
G204 19.3 [0.760] 8.5 [0.335] 0.8 [0.031] 73 ± 1 [2.874 ± 0.039] 2.2
G206 32.3 [1.272] 9.8 [0.386] 0.8 [0.031] 107 ± 2 [4.213 ± 0.079] 6.5
G207 49.3 [1.941] 10.5 [0.413] 0.8 [0.031] 120 ± 2 [4.724 ± 0.079] 10
BA
C
D
D1
- 50 50 150 250 350
120
100
80
60
40
20
0
% NI REWOP DETAR
AMBIENT TEMPERATURE IN °C
40- 55
TEMPERATURE RISE IN K
POWER IN W
0
100
200
300
400
500
012345
G202
TEMPERATURE RISE IN K
POWER IN W
0
100
200
300
400
500
0246810
G204
G200
www.vishay.com Vishay Draloric
Revision: 03-Aug-12 4Document Number: 21002
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TEMPERATURE RISE TEMPERATURE RISE
TEMPERATURE RISE IN K
POWER IN W
0
100
200
300
400
500
048121620
G206
G207
TEMPERATURE RISE IN K
POWER IN W
0
100
200
300
400
500
0 5 10 15 20
TEST PROCEDURES AND REQUIREMENTS
EN
60115-1
CLAUSE
IEC
60068-2
TEST METHOD
TEST PROCEDURE REQUIREMENTS
PERMISSIBLE CHANGE (R)
4.7 - Voltage proof
V-block-method; U = Uins; 60 s
No flashover or breakdown
Model Uins (V)
G202/FDG 300
G204/FDK 400
G206/FDP 500
G207 650
4.8.4.2 - Temperature
coefficient
At (20/- 55/20) °C
and (20/200/20) °C 100 ppm/K to 180 ppm/K
4.13 - Short time overload
Overload voltage =
x rated voltage
± (1.0 % R + 0.05 )
no visible damage
Model Duration (s)
G202/FDG 5
G204/FDK 6
G206/FDP 10
G207 10
4.16
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness of
terminations Tensile, bending and torsion ± (1.0 % R + 0.05 ),
no visible damage
4.17.2 20 (Ta) Solderability
Solder bath method;
SnPb40; non-activated flux
(235 ± 5) °C; (2 ± 0.2) s Good tinning
(≥95 % covered,
no visible damage)
Solder bath method;
SnAg3Cu0.5; non-activated flux;
(245 ± 5) °C; (3 ± 0.3) s
4.18.2 20 (Tb, Method
1A)
Resistance to
soldering heat
Unmounted components;
(260 ± 3) °C; (10 ± 1) s
± (1.0 % R + 0.05 ),
no visible damage
4.19 14 (Na)
Rapid
change of
temperature
30 min at LCT = - 55 °C
30 min at UCT = 200 °C
5 cycles
± (1.0 % R + 0.05 ),
no visible damage
4.21 27 (Ea) Shock
Acceleration: 981 m/s2
Pulse Duration: 11 ms
Wave Form: Half sine
3 successive shocks to be applied
in each perpendicular direction
± (1.0 % R + 0.05Ω),
no visible damage
10
G200
www.vishay.com Vishay Draloric
Revision: 03-Aug-12 5Document Number: 21002
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
4.22 6 (B4) Vibration
6 h;
10 Hz to 2000 Hz
1.5 mm or 196 m/s2
± (1.0 % R + 0.05 ),
no visible damage
4.23
Climatic sequence
± (5.0 % R + 0.05 )
4.23.2 2 (Ba) Dry heat 200 °C; 16 h
4.23.3 30 (Db)
Damp heat, cyclic
55 °C; 24 h; 90 % to 100 % RH;
1 cycle
4.23.4 1 (Aa) Cold - 55 °C; 2 h
4.23.5 13 (M) Low air pressure; 1.0 kPa; 2 h;
15 °C to 35 °C
4.23.6 30 (Db)
Damp heat, cyclic
55 °C; 5 days; 95 % to 100 % RH;
5 cycles
4.25.2 - Endurance at RT °C
PRT, 1000 h
(PRT = P25 for CECC qualified model
and P40 for commercial model)
U = 1.5 h on; 0.5 h off
± (5.0 % R + 0.05 )
PRT, 8000 h ± (8.0 % R + 0.05 )
4.25.3 - Endurance at upper
category temperature
UCT = 200 °C
acc. to CECC40201-801;
load 54 % P70; 1000 h
U = 1.5 h on; 0.5 h off
± (5.0 % R + 0.05 )
4.24
78 (Cab) Damp heat,
steady state
(40 ± 2) °C;
56 days;
(93 ± 3) % RH
± (5.0 % R + 0.05 )
TEST PROCEDURES AND REQUIREMENTS
EN
60115-1
CLAUSE
IEC
60068-2
TEST METHOD
TEST PROCEDURE REQUIREMENTS
PERMISSIBLE CHANGE (R)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
