© Semiconductor Components Industries, LLC, 2007
February, 2020 − Rev. 1
1Publication Order Number:
EGP20K/D
High Efficiency Rectifiers
2.0A Glass Passivated
EGP20A - EGP20K
Features
•Glass−Passivated Cavity−Free Junction
•High Surge Current Capability
•Low Leakage Current
•Super−Fast Recovery Time for High Efficiency
•Low Forward Voltage, High Current Capability
ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise noted
Symbol Parameter Value Units
IF(AV) Average Rectified Current
0.375 inch lead length at TA = 55°C 2.0 A
IFSM Peak Forward Surge Current
8.3 ms single half−sine−wave
Superimposed on rated load
(JEDEC method)
75 A
TJ, TSTG Junction and Storage Temperature Range −65 to
150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Symbol Parameter Value Units
PDTotal Device Dissipation 3.13 W
Derate above 25°C 25 mW°C
RqJA Thermal Resistance, Junction to Ambient 40 °C/W
RqJL Thermal Resistance, Junction to Lead 15 °C/W
ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise noted
Parameter
Device
Units
20A 20B 20C 20D 20F 20G 20J 20K
Peak Repetitive Reverse Voltage 50 100 150 200 300 400 600 800 V
Maximum RMS Voltage 35 70 105 140 210 280 420 560 V
DC Reverse Voltage (Rated VR) 50 100 150 200 300 400 600 800 V
Maximum Reverse
Current at Rated VR
TA = 25_C5.0 mA
TA = 125_C100 mA
Maximum Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A 50 75 nS
Maximum Forward Voltage @ 2.0 A 0.95 1.25 1.7 V
Typical Junction Capacitance
VR = 4.0 V, f = 1.0 MHz
70 45 pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
*Pulse Test: Pulse Width ≤300 ms, Duty Cycle ≤2%.
www.onsemi.com
EGP20K = Specific Device Code
$Y = ON Semiconductor Logo
&Z = Assembly Code
&3 = Date Code
MARKING DIAGRAM
EGP20K
$Y&Z&3
AXIAL LEAD DO 204
CASE 017AJ
EGP20A − EGP20K
www.onsemi.com
3
Reverse Recovery Time Characterstic and Test Circuit Diagram
Figure 6. Figure 7.
ORDERING INFORMATION
Device Package Shipping
EGP20K Axial Lead / DO−204
CASE 017AJ
4000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
AXIAL LEAD DO 204
CASE 017AJ
ISSUE O
DATE 30 NOV 2016
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON13437G
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
AXIAL LEAD DO 204
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
