TPC Series Low ESR TACmicrochip(R) TPC series offers lower ESR feature to TACmicrochip(R) solid tantalum capacitors. The low ESR TPC capacitors improve performance of power supplies in miniature case sizes such as 0603 and 0805. CASE DIMENSIONS: millimeters (inches) L Code POLARITY BAND NOT TO EXCEED CENTER LINE EIA Code % K EIA Metric Length (L) +0.20 0402 1005-07 1.00 -0.00 +0.008 Width (W) Height (H) +0.20 Termination Spacing(S) Minimum Average Termination Mass Length (Lt) +0.20 0.50 -0.00 0.50 -0.00 +0.008 +0.008 0.40 min 0.10 (0.004) 2.0mg 0.55 min 0.15 (0.006) 8.6mg 0.70 min 0.15 (0.006) 29.9mg (0.039 -0.000 ) (0.020 -0.000 ) (0.020 -0.000 ) +0.15 +0.15 0.85 -0.00 0.85 -0.00 +0.008 +0.006 +0.006 (0.063 -0.000 ) (0.033 -0.000 ) (0.033 -0.000 ) +0.20 H S Lt L % W R 0603 1608-10 1.60 -0.00 2.00 +0.20 0805 2012-15 -0.00 (0.079 +0.008 ) -0.000 1.35 +0.15 -0.00 (0.053 +0.006 ) -0.000 1.35 +0.15 -0.00 (0.053 +0.006 ) -0.000 HOW TO ORDER TPC R 106 M 010 R 1800 Type TACmicrochip(R) Case Size 0402=K 0603=L 0805=R Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K=10% M=20% Rated DC Voltage 003=3Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc 025=25Vdc Packaging (see table below) Maximum ESR in Milliohms See note below Packaging Suffix Standard Reel Tin Termination Size Plastic Tape Case R/L 7" Rxxxx 1 Xxxxx 4 4" Standard Gold Termination Tin Termination Gold Termination Plastic Tape Plastic Tape Plastic Tape R/L K K Axxxx Pxxxx Mxxxx Fxxxx Qxxxx Nxxxx NOTE: xxxx = ESR Value in Milliohms TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: Termination Finish: +85C: +125C: +85C: +125C: All technical data relate to an ambient temperature of +25C 1 F to 47 F 10%; 20% 0.01CV or 0.5A whichever is the greater 3 4 6.3 10 16 20 25 2 2.7 4 7 10 13 17 3.9 5.2 8 13 20 26 32 2.6 3.2 5 8 12 16 20 -55C to +125C 1% per 1000 hours at 85C, VR with 0.1/V series impedance, 60% confidence level Nickel and Tin Plating (standard), Nickel and Gold Plating option available upon request 41 TPC Series Low ESR TACmicrochip(R) LOW ESR RANGE (LETTER DENOTES CASE SIZE) (ESR in m) Capacitance F Code 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 2.0V 3.0V 4.0V Voltage Rating DC (VR ) at 85C 6.3V 10V L(5000) 16V 20V 25V R(3000) K(8000) L(5000) L(5000)(M) K(8000) R(1800) R(1500) R(1800)/L(5000)(M) R(1500) L(4000)(M) R(1800) R(1500) L(4000)(M),R(1800) R(1500) R(1800) R(1800) Codes shown are examples of ESR values offered on certain CV and case size. Other codes and ESR values available upon request. Released codes (M tolerance only) RATINGS & PART NUMBER REFERENCE AVX Part No. EIA TPCK475*003#8000 TPCR336*003#1800 TPCR476*003#1500 TPCL226M004#5000 TPCR226*004#1800 TPCR336*004#1500 TPCK225*006#8000 TPCL106M006#4000 TPCR156*006#1800 TPCR226*006#1500 TPCR476M006#1800 TPCL105*010#5000 TPCL335*010#5000 TPCL475M010#5000 TPCL106M010#4000 TPCR106*010#1800 TPCR156*010#1500 TPCR106*016#1800 TPCR105*025#3000 0402 0805 0805 0603 0805 0805 0402 0603 0805 0805 0805 0603 0603 0603 0603 0805 0805 0805 0805 Rated DCL Case Capacitance Voltage (A) Size (F) (V) Max. K R R L R R K L R R R L L L L R R R R 4.7 33 47 22 22 33 2.2 10 15 22 47 1.0 3.3 4.7 10 10 15 10 1.0 3.0 3.0 3.0 4.0 4.0 4.0 6.3 6.3 6.3 6.3 6.3 10.0 10.0 10.0 10.0 10.0 10.0 16.0 25.0 0.5 1.0 1.5 0.9 0.9 1.3 0.5 0.6 0.9 1.4 3.0 0.5 0.5 0.5 1.0 1.0 1.5 1.6 0.5 DF ESR 100kHz Ripple Current Ratings (A) % Max. (m) 25C 85C 125C Max. @100kHz 12 10 10 6 8 10 8 10 8 10 20 6 8 10 20 8 10 10 8 8000 1800 1500 5000 1800 1500 8000 4000 1800 1500 1800 5000 5000 5000 4000 1800 1500 1800 3000 All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. * Insert K for 10% and M for 20% Capacitance Tolerance NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. The EIA & CECC standards for Low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. 42 0.043 0.158 0.173 0.071 0.158 0.173 0.043 0.079 0.158 0.173 0.158 0.071 0.071 0.071 0.079 0.158 0.173 0.158 0.122 0.039 0.142 0.156 0.064 0.142 0.156 0.039 0.071 0.142 0.156 0.142 0.064 0.064 0.064 0.071 0.142 0.156 0.142 0.110 0.017 0.063 0.069 0.028 0.063 0.069 0.017 0.032 0.063 0.069 0.063 0.028 0.028 0.028 0.032 0.063 0.069 0.063 0.049 100kHz Ripple Voltage Ratings (V) 25C 85C 125C 0.346 0.285 0.260 0.354 0.285 0.260 0.346 0.316 0.285 0.260 0.285 0.354 0.354 0.354 0.316 0.285 0.260 0.285 0.367 0.312 0.256 0.234 0.318 0.256 0.234 0.312 0.285 0.256 0.234 0.256 0.318 0.318 0.318 0.285 0.256 0.234 0.256 0.331 0.139 0.114 0.104 0.141 0.114 0.104 0.139 0.126 0.114 0.104 0.114 0.141 0.141 0.141 0.126 0.114 0.104 0.114 0.147