MS3124F14-15SY - Array - Datasheet.World

MIL-C-26482, Series I Crimp

Commercial and Military QPL’d

PWF/MS Receptacle

and Plug Connectors

Array PWF Series

Crimp/Bayonet

Coupling Connectors

ARRAY CONNECTOR CORPORATION

US Headquarters And Manufacturing Facilities:

12555 S. W. 130th Street • Miami, FL 33186

Phone: (305) 234-1000 • Fax: (305) 234-6601 • www.arrayconnector.com

®

1) Coupling nut

2) Wave washer

3) Back shell

4) Compression sleeve

5) Grommet

6) Pin contact

7) Pin insert

8) Socket insert

9) Socket contact

10) Plug shell

11) Receptacle shell

12) Gasket

13) Contact retention disk

Nine shell sizes are

available and twenty-

four insert arrange-

ments with both pin

and socket contacts.

PWF00/MS3120

Wall Mount Receptacle

PWF01/MS3121

In-Line Receptacle

PWF02/MS3122

Box Mount Receptacle

PWF06/MS3126

Straight Plug

PWF07/MS3124

Jam Nut Receptacle

(Environmental)

Design Solutions ISO 9001

ACC and are registered trademarks of Array Connector Corporation.

CONTENTS

Product Data and Polarization.....................................................................................3

Nomenclature Guide and Cross Reference.................................................................4

Contacts Arrangements...............................................................................................5

Panel Mounting Data....................................................................................................6

Series PWF00/MS3120 Wall Mount Receptacle.........................................................7

Series PWF01/MS3121 In-Line Receptacle................................................................8

Series PWF02/MS3122 Box Mount Receptacle..........................................................9

Series PWF07/MS3124 Jam Nut Receptacle..........................................................10

Series PWF06/MS3126 Straight Plug.......................................................................11

Series PW80/MS3180 and PW81/MS3181 Protective Caps....................................12

Contact Data..............................................................................................................13

Crimping Instructions.................................................................................................14

FEATURES

Array’s PWF family of connectors meet or exceed the requirements of MIL-C-26482

Series I Crimp and are listed in the U.S. Department of Defense Qualified Parts List.

These connectors are available in 9 shell sizes and 24 insert arrangements, all inter-

mateable and interchangeable with connectors produced in accordance with MIL-C-

26482 Series I and Series II. Standard contact termination is by crimping using stan-

dard crimp tools: either automated wire stripping and crimping machines or manually

with the use of hand crimping tools. Contact insertion and extraction is also accom-

plished with the use of standard tools.

Designed for wire sizes AWG 16 through 24, these highly durable connectors are

used in wide variety of applications including aerospace, military equipment, machine

tools, robotics, communications, medical equipment, automation equipment, and

industrial sensors to name just a few.

Shells and hardware are made of high strength aluminum alloys and are available

with a variety of plated or anodized finishes. Contacts are machined from solid cop-

per alloy and gold plated in accordance with MIL-G-45204 type II. With a standard

operating temperature range of -55ºC to +125ºC available with a variety of acces-

sories and features, Array’s PWF series is widely called out by design engineers and

specifiers seeking reliability and durability throughout a broad range of environmental

requirements.

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

®

ARRAY CONNECTOR CORPORATION

®Array PWF Series

Crimp/Bayonet Coupling Connectors

MIL-C-26482, Series I Crimp

Commercial and Military QPL’d

Array Connector Corporation produces high quality products. These products are intended to be used in accordance with the specifications described in this catalog. Any use or application that devi-

ates from the stated operating specifications is not recommended and may be unsafe. Alimited warranty is applicable. Except for obligations assumed by Array Connector Corporation under

warranty, Array will be not be liable for any loss, damage, repairs, incidental or consequential damages of any kind, whether or not based upon expressed or implied warranty, contract,

negligence, or liability arising from the application or manufacture or repair of these products. This catalog is not a contractual offering; it is for informational purposes only.

2

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 3

ARRAY CONNECTOR CORPORATION

®

Product Data

Electrical Standard Material and Finishes

Contact Termination

Number of Contacts

Wire Size, AWG

Wire Range Accomodations

Contact Size AWG Wire Size Min. Max.

Contact Size Rated Amps Test current Max. Millivolt Drop

20 7.5 7.5 55

16 13.0 13.0 49

(PWF) Crimp

Shell (Mil-Std)

Aluminum alloy, conductive olive

drab chromate over cadmium

finish per QQ-P-416. (Consult

Factory for Commercial options.)

Shell Styles

00 - Wall mounting receptacle

01 - Cable in line receptacle

02 - Box mounting receptacle

06 - Straight plug

07 - Jam nut receptacle

08 - 90º Angle plug

Contact Rating

Voltage Rating

Altitude Service Rating

Sea Level

70,000 ft.

1

AC(rms)

1500

2300

375

500

DC

2100

3200

535

770

AC(rms)

600

1000

300

DC

850

1400

510

450 740

2

1

2

Test Voltage Max. Working Voltage

3 to 61

16 to 24

Insulation O.D. Limits

Insulator Synthetic Rubber

Synthetic Rubber

-55ºC to +125ºC

Cooper alloy, gold plate per MIL-

G-45204 type II.

Grommet and Seal

Contacts

Temperature Range

E - Grommet seal

F - Grommet seal with strain relief

N - No back end, no termination

hardware

P- Potted

8 thru 24Shell Size

Five keyway/three point bayonet

locking.

Polarization/Coupling

Service

Classes

20 24, 22 and 20 .066 (1.52) .083 (2.11)

16 20, 18 and 16 .066 (1.68) .109 (2.77)

Mechanical

Shell

Size Layout

Position

W

8

10

12

14

3A

33

6

7

3

8

10

5

12

15

18

19

60º

90º

-

180º

-

112º 203º 292º

270º 295º

184º 273º

--

155º 234º

180º 270º

315º -

155º

92º

90º

110º

90º

165º

90º

60º

40º

43º

17º

15º

30º

XYZ

Polarization

The diagrams indicate alternate insert positions. The five positions (W, X, Y, Z and Normal) differ in degree of

rotation for various size and layouts. The exact angle of rotation for the combinations are listed in the table below.

Note: for polarization data for the other contact

arragements, consult factory.

Shell

Size Layout

Position

W

16

18

20

22

24

8

23

26

11

32

16

39

41

21

41

55

61

54º

158º

60º

62º

85º

152º

270º

-

119º

180º

-

275º

241º

222º

331º

-

338º

340º

265º

138º

318º 333º 347º

252º 333º

225º -

175º 349º

264º -

226º 314º

270º 324º

144º

126º

135º

142º

180º

238º

63º

45º

16º

39º

30º

90º

XYZ

Engaging Face-

Pin Inserts

Position N

(Normal)

L*TE*O*A

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

4

ARRAY CONNECTOR CORPORATION

®

PWF

MS

06

*6

3126

E

22-

55

P

Y

K001**

SERIES

PREFIX

PWF = ARRAY

MS = MILITARY

SHELL SIZE

00 = wall receptacle

01 = in-line receptacle

02 = box mount receptacle

06 = straight plug

07 = jam nut mount receptacle

08 = 90º plug

SERVICE TYPE (Class)

E = grommet seal

F = same as E with strain relief

P= potting shell

N = no back end, threaded with no cable

termination hardware

POLARIZATION

(See Chart, page 3)

MODIFICATION CODES

A602 = Black Anodize Plating

A610 = Aluminate Plating

A611 = Nickel Plating

A612 = Electroless Nickel Plating

A617 = Tin Plating

F602 = Clinch Nuts

M901 = Stainless Steel Construction

** For modification codes not listed, consult

factory

CONTACT TYPE

P= pins

S = sockets

A= pin less contacts

B = socket less contacts

CONTACT ARRANGEMENT

(See page 5)

SHELL SIZE

0 thru 24 available

Nomenclature Guide

Example #1

#2

#3

*NOTE: When modification to a standard plug or receptacle is required, delete the “0” between the PWF and the “6” as in example #2.

CANNON FCI/BURNDY

PWF05*

PWF04*

~~~~~ PWF08*

Cross Reference

LEADING SUPPLIERS’ COMMERCIAL EQUIVALENT

MIL SPEC

PART NOs. ARRAY AMPHENOL-

BENDIX SOURIAU VEAM

MS3120E*

MS3120F*

MS3120P*

MS3121E*

MS3121F*

MS3121P*

MS3122E*

MS3124E*

MS3124F*

MS3124P*

MS3126E*

MS3126F*

MS3126P*

~~~~~

MS3127E*

MS3128E*

PWF00E*

PWF00F*

PWF00P*

PWF01E*

PWF01F*

PWF01P*

PWF02E*

PWF07E*

PWF07F*

PWF07P*

PWF06E*

PWF06F*

PWF06P*

PWF**N*

No rear accessories (Commercial part numbering only)

PT00SE*

PT00SE*(SR)

PT00SP*

PT01SE*

PT01SE*(SR)

PT01SP*

PT02SE*

PT07SE*

PT07SE*(SR)

PT07SP*

PT06SE*

PT06SE*(SR)

PT06SP*

PT08SE*

PT03/4/5SE*

MF02S*

MF00SE*

L*TF*O*A

L*TP*0*A

L*TE*1*A

L*TF*1*A

L*TP*1*A

L*TE*2*A

L*TE*4*A

L*TF*4*A

L*TP*4*A

L*TE*6*A

L*TF*6*A

L*TP*6*A

L*TE*7*A

L*TE*8*A

VPT00SE*

VPT00SE*(SR)

VPT00SP*

VPT01SE*

VPT01SE*(SR)

VPT01SP*

851-00R*50*

851-00RC*50

851-00RP*50

851-01R*50

851-01RC*50

851-01RP*50

851-02R*50

851-07R*50

851-07RC*50

851-07RP*50

851-06R*50

851-06RC*50

851-06RP*50

851-08RP*50

VPT02SE*

VPT07SE*

VPT07SE*(SR)

VPT07SP*

VPT06SE*

VPT06SE*(SR)

VPT06SP*

VPT08SE*

KPSE00E*

KPSE00F*

KPSE00P*

KPSE01E*

KPSE01F*

KPSE01P*

KPSE02E*

KPSE07E*

KPSE07F*

KPSE07P*

KPSE06E*

KPSE06F*

KPSE07P*

KPSE08*

KPSE03/4/5*

KP27E*

KP28E*

NOTES:

1. Souriau is “commercial only”. Not on QPL.

2. For MS connectors “without contacts”, include “less contacts” after the complete connector MS number. The MS number does not change.

3. Connectors per MS have spare contacts and sealing plugs. Connectors per supplier’s commercial part number do not have these additional parts.

90o Cable Entry Plug (No MS drawing. Do not confuse with MS3128)

Wall Mount, Special Wide Flange (Special)

Box Mount, Special Large Flange (Special)

08

10

18

14

12

16

20

22

24

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 5

ARRAY CONNECTOR CORPORATION

®

Contact Arrangement

(Engaging Face of Pin Insert)

** Commercial arrangement.

º MIL-C-26482 Series 1 Contact arrangements, per MIL-STD-1669

(For contact arrangements not shown, contact factory)

3A

10

8.572

.697

.885

1.010

1.135

1.260

1.385

1.510

1.635

.540

.665

.828

.952

1.076

1.201

1.326

1.451

1.576

14.53

17.70

22.45

25.67

28.87

32.00

35.18

38.35

41.50

13.72

16.90

21.03

24.20

27.35

30.75

33.65

36.83

40.00

12

14

16

18

20

22

24

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

6

ARRAY CONNECTOR CORPORATION

®

Panel Mounting Data

Series PWF Panel Cutout Dimensions

Front Panel Mounting Rear Panel Mounting

Max Panel & Screw Heads

SHELL

SIZE

8

10

12

14

16

18

20

22

24

PWF00

0.212 0.212

0.087 0.087

PWF02

SHELL

SIZE

INCHES MILLIMETERS

.125±.005 DIA.

FOR SIZES 8 - 22

.155± .005 DIA.

FOR SIZES 24

Wall & Box Mounting

Receptacle 00, 02

Square flange PWF receptacles are

normally front panel mounted, using

dimensions indicated. Hole location “R”

is true position and is located within

.005 dia. of (TP). When back panel

mounting, provision must be made for

bayonet pin and coupling clearance.

Jam Nut Receptacle 07

PWF jam nut receptacles are rear

panel mounted in a “D” shaped mount-

ing hole. Minimum panel thickness is

.062”, maximum is .125” for sizes 8

through 18 and .250” for sizes 20

through 24.

A R A R

10

8.479

.603

.730

.855

.979

1.103

1.223

1.350

1.475

.594

.719

.812

.906

.969

1.062

1.156

1.250

1.375

12.17

15.32

18.54

21.72

24.87

28.02

30.56

33.78

36.96

15.08

18.28

20.61

23.00

24.60

27.00

29.36

31.75

33.98

12

14

16

18

20

22

24

SHELL

SIZE

INCHES MILLIMETERS

A R A R

Note: All dimensions relate to distance in

front of flange required for proper mating.

DIMENSIONS IN INCHES

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 7

ARRAY CONNECTOR CORPORATION

®

Series PWF00/MS3120

Wall Mount Receptacle

Application: Wall Mounting Connector.

Note: L* = Total connector length including cable accessory.

SHELL

SIZE

8

10

12

14

16

18

20

22

24

.234

.297

.422

.547

.609

.734

.922

.984

.317

.434

.548

.673

.798

.899

1.024

1.149

1.274

.062

.094

.608 .431

.431

.556

.589

.471

.588

.748

.873

.998

1.123

1.248

1.373

1.498

.828

.954

1.047

1.141

1.234

1.328

1.453

1.578

1.703

.828

.891

1.016

1.141

1.203

1.469

1.656

1.750

.120

.147

.734

.858

.984

1.110

1.234

1.360

1.484

1.610

Xf

MIN.

Xp

MIN.

K

± .016

Y

MAX.

Yf

MAX.

M

+.031

-.000

A

±.003

S

MAX.

T

±.005

V V THREAD

CLASS 2A

7/16-28 UNEF

9/16-24 UNEF

11/16-24 UNEF

13/16-20 UNEF

15/16-20 UNEF

1 1/16-18 UNEF

1 3/16-18 UNEF

1 5/16-18 UNEF

1 7/16-18 UNEF

DIMENSIONS IN MILLIMETERS

SHELL

SIZE

8

10

12

14

16

18

20

22

24

5.95

7.54

10.72

13.89

15.47

18.64

23.42

24.99

8.05

11.02

13.92

17.09

20.27

22.83

26.01

29.18

32.26

1.57

2.39

15.44

18.64

21.79

24.99

28.19

31.34

34.54

37.82

40.89

21.03 10.95

10.95

14.12

14.96

11.99

14.94

19.00

22.17

25.35

28.52

31.70

34.27

38.05

21.03

24.23

26.59

28.98

31.34

33.73

36.91

40.08

43.26

3.05

3.73

22.63

25.81

28.98

30.56

37.31

42.06

44.45

Xf

MIN.

Xp

MIN. K

± .406

Y

MAX.

Yf

MAX.

M

+ .787

- .000

A

± .076

S

MAX.

T

± .127

V V THREAD

CLASS 2A

7/16-28 UNEF

9/16-24 UNEF

11/16-24 UNEF

13/16-20 UNEF

15/16-20 UNEF

1 1/16-18 UNEF

1 3/16-18 UNEF

1 5/16-18 UNEF

1 7/16-18 UNEF

CLASS N CLASS E CLASS F CLASS P

.938

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

8

ARRAY CONNECTOR CORPORATION

®Series PWF01/MS3121

In-Line Receptacle

DIMENSIONS IN INCHES

Application: Cable-To-Cable Connector (suggested mates are PWF06/MS3126).

Note: L* = Total connector length including cable accessory.

SHELL

SIZE

8

10

12

14

16

18

20

22

24

.234

.297

.422

.547

.609

.734

.922

.984

.317

.434

.548

.673

.798

.899

1.024

1.149

1.274

.094

.115

.608

.734

.858

.984

1.110

1.234

1.360

1.484

1.610

.828 .400

.400

.535

.568

.471

.588

.748

.873

.998

1.123

1.248

1.373

1.498

1.062

1.156

1.250

1.344

1.438

1.562

1.688

1.812

.891

1.016

1.141

1.203

1.469

1.656

1.750

Xf

MIN.

Xp

MIN.

K

± .010

Y

MAX.

Yf

MAX.

M

+.031

-.000

A

±.003

G

±.020

.828

.954

1.047

1.141

1.234

1.328

1.453

1.578

1.70

S

MAX.

V V THREAD

CLASS 2A

7/16-28 UNEF

9/16-24 UNEF

11/16-24 UNEF

13/16-20 UNEF

15/16-20 UNEF

1 1/16-18 UNEF

1 3/16-18 UNEF

1 5/16-18 UNEF

1 7/16-18 UNEF

DIMENSIONS IN MILLIMETERS

SHELL

SIZE

8

10

12

14

16

18

20

22

24

5.94

7.54

10.72

13.89

15.47

18.64

23.42

24.99

8.05

11.02

13.92

17.09

20.27

22.83

26.01

29.18

32.26

2.39

2.92

15.44

18.64

21.79

24.99

28.19

31.34

34.54

37.82

40.89

21.03 10.16

10.16

13.59

14.43

11.99

14.94

19.00

22.17

25.35

28.52

31.70

34.27

38.05

21.03

24.23

26.59

28.98

31.34

33.73

36.91

40.08

43.26

3.05

3.73

22.63

25.81

28.98

30.56

37.31

42.06

44.45

Xf

MIN.

Xp

MIN.

K

± .254

Y

MAX.

Yf

MAX.

M

+.787

-.000

A

± .076

S

MAX.

G

± .508

V V THREAD

CLASS 2A

7/16-28 UNEF

9/16-24 UNEF

11/16-24 UNEF

13/16-20 UNEF

15/16-20 UNEF

1 1/16-18 UNEF

1 3/16-18 UNEF

1 5/16-18 UNEF

1 7/16-18 UNEF

CLASS N CLASS F CLASS P CLASS E

1.234

1.328

1.453

1.578

1.703

1.047

1.141

.828

.954

S

MAX.

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 9

ARRAY CONNECTOR CORPORATION

®

Application: Box Mount Receptacle.

DIMENSIONS IN INCHES

SHELL

SIZE

8

10

12

14

16

18

20

22

24

.062

.094

.438

.558

.688

.812

.938

1.062

1.188

1.312

1.438

1.320

1.367

1.418

.431

.556

.589

.471 .594

.719

.812

.906

.969

1.062

1.156

1.250

1.375

T

± .005

.120

.147

.588

.748

.873

.998

1.123

1.248

1.373

1.498

K

± .010

N

± .015

L MAX.

M

+.031

-.000

A

±.003

R

(Tp)

31.34

33.73

36.91

40.08

43.26

26.59

28.98

21.03

24.23

S

MAX.

DIMENSIONS IN MILLIMETERS

SHELL

SIZE

8

10

12

14

16

18

20

22

24

1.57

2.39

11.13

36.53

14.27

17.48

20.62

23.83

26.97

30.18

33.32

33.53

34.72

36.02

10.95

14.12

14.96

12.01 15.09

18.26

20.62

23.01

24.61

26.97

29.36

31.75

34.93

T

± .127

3.05

3.73

14.99

19.05

22.23

25.40

28.58

31.75

34.93

38.10

K

± .254

N

± .381

L MAX.

M

+.787

-.000

A

± .076

R

(Tp)

Series PWF02/MS3122

Box Mount Receptacle

24

Xf

MIN.

.234

.297

.422

.547

.609

.734

.922

.984

PA

±.003

AA

MAX. Z THREAD

S

MAX.

Lp

MAX.

M

+.031

-.000

Lf

MAX.

Le

MAX.

Yp

MAX.

K

±.020

Yf

MAX.

1.141

Xp

MIN.

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

10

ARRAY CONNECTOR CORPORATION

®

DIMENSIONS IN INCHES

Application: Jam Nut Mounting with O-ring to D-shaped Chassis Hole. (See panel cutout dimensions on page 6.)

Note: L* = Total connector length including cable accessory.

SHELL

SIZE

8

10

12

14

16

18

20

22

.062

.125

.250

.317

.434

.548

.673

.798

.899

1.024

1.149

1.274

.117

.148

.828

.891

1.016

1.203

1.469

1.656

1.750

.608 .691

.691

.879

.912

.471

.588

.748

.873

.998

1.123

1.248

1.373

1.498

.767

.892

1.079

1.205

1.329

1.455

1.579

1.705

1.829

.954

1.078

1.266

1.391

1.516

1.641

1.828

1.954

2.078

.734

.858

.984

1.110

1.234

1.360

1.484

1.610

1.547

1.709

2.422

2.537

2.824

2.900

1.675

1.963

2.025

MIN. MAX.

5/8-24 UNEF

3/4-20 UNEF

7/8-20 UNEF

1-20 UNEF

1 1/8-18 UNEF

1 1/4-18 UNEF

1 3/8-18 UNEF

1 1/2-18 UNEF

1 5/8-18 UNEF

Series PWF07/MS3124

Jam Nut Receptacle

24

Xf

MIN.

5.94

7.54

10.72

13.89

15.47

18.64

23.42

24.99

PA

±.076

AA

MAX. Z THREAD

S

MAX.

Lp

MAX.

M

+.787

-.000

Lf

MAX.

Le

MAX.

Yp

MAX.

K

± .508

Yf

MAX.

29.98

Xp

MIN.

DIMENSIONS IN MILLIMETERS

SHELL

SIZE

8

10

12

14

16

18

20

22

1.57

3.18

6.35

8.05

11.02

13.92

17.09

20.27

22.83

26.01

29.18

32.36

2.97

3.76

21.03

22.63

25.81

30.56

37.31

42.06

44.45

15.44 17.90

17.90

22.68

23.52

11.99

14.94

19.00

22.17

25.35

28.52

31.70

34.87

38.05

19.48

22.66

27.41

30.61

33.76

36.96

40.11

43.31

46.46

24.23

27.38

32.16

35.33

38.51

41.68

46.43

49.63

52.78

18.64

21.79

24.99

28.19

31.34

34.54

39.69

40.89

39.29

43.41

61.52

64.44

71.73

73.66

42.55

49.86

51.44

MIN. MAX.

5/8-24 UNEF

3/4-20 UNEF

7/8-20 UNEF

1-20 UNEF

1 1/8-18 UNEF

1 1/4-18 UNEF

1 3/8-18 UNEF

1 1/2-18 UNEF

1 5/8-18 UNEF

CLASS N CLASS E CLASS F CLASS P

V V THREAD

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 11

ARRAY CONNECTOR CORPORATION

®

DIMENSIONS IN INCHES

Application: Straight Plug Connector, General Cable Coupling.

Note: L* = Total connector length including cable accessory.

SHELL

SIZE

8

10

12

14

16

18

20

22

24

.234

.297

.422

.547

.609

.734

.922

.984

.317

.434

.548

.673

.798

.899

1.024

1.149

1.274

.608

.734

.858

.984

1.110

1.234

1.360

1.484

1.610

.828

.891

1.016

1.141

1.203

1.469

1.656

1.750

1.513 2.413

2.413

2.528

2.753

2.830

1.750

1.892

.782

.926

1.043

1.183

1.305

1.391

1.531

1.656

1.777

1.513

1.638

Xf

MIN.

Xp

MIN.

Y

MAX.

Yf

MAX.

Le

MAX.

Lf

MAX.

Lp

MAX.

Q

MAX.

7/16-28 UNEF

9/16-24 UNEF

11/16-24 UNEF

13/16-20 UNEF

15/16-20 UNEF

1 1/16-18 UNEF

1 3/16-18 UNEF

1 5/16-18 UNEF

1 7/16-18 UNEF

DIMENSIONS IN MILLIMETERS

SHELL

SIZE

8

10

12

14

16

18

20

22

24

5.94

7.54

10.72

13.89

15.47

18.64

23.42

24.99

8.05

11.02

13.92

17.09

20.27

22.83

26.01

29.18

32.26

15.44

18.64

21.79

24.99

28.19

31.34

34.54

37.82

40.89

21.03

22.63

25.81

28.98

30.56

37.31

42.06

44.45

38.43 61.29

61.29

64.21

69.93

71.88

44.45

48.06

49.61

19.86

23.52

26.49

30.05

33.15

35.33

38.89

42.06

45.14

38.43

41.61

Xf

MIN.

Xp

MIN.

Y

MAX.

Yf

MAX.

Le

MAX.

Lf

MAX.

Lp

MAX.

Q

MAX.

7/16-28 UNEF

9/16-24 UNEF

11/16-24 UNEF

13/16-20 UNEF

15/16-20 UNEF

1 1/16-18 UNEF

1 3/16-18 UNEF

1 5/16-18 UNEF

1 7/16-18 UNEF

CLASS N

CLASS E CLASS F CLASS P

Series PWF06/MS3126

Straight Plug

DASH NO.

WITH

CHAIN

L

MAX.

DIMENSIONS IN INCHES

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

12

ARRAY CONNECTOR CORPORATION

®

PW80/MS3180 and

PW81/MS3181 Protective Caps

Part No. PW80-** or MS3180-**

**=“Dash Number”

Part No. PW81-** or MS3181-**

**=“Dash Number”

(MS 3180)

(MS 3181)

DASH NO.

SHELL

SIZE

8

10

12

14

16

18

20

22

24

G1

G2

G3

G4

G5

G6

G7

G8

G9

G11

G12

G13

G14

G15

G16

G17

G18

G19

.473

.590

.750

.875

1.000

1.125

1.250

1.375

1.500

.719

.844

1.000

1.125

1.250

1.375

1.500

1.625

1.750

3.00

3.50

4.00

.562

.625

.658

.378

.440

.473

12.01

14.98

19.05

22.21

25.40

28.58

31.75

34.93

38.10

18.28

21.41

25.40

28.58

31.75

34.93

38.10

41.28

44.45

76.20

88.90

101.60

14.27

15.87

16.71

9.60

11.17

12.05

G1

G2

G3

G4

G5

G6

G7

G8

G9

G11

G12

G13

G14

G15

G16

G17

G18

G19

G1

G2

G3

G4

G5

G6

G7

G8

G9

G11

G12

G13

G14

G15

G16

G17

G18

G19

G21

G22

G23

G24

G25

G26

G27

G28

G29

G21

G22

G23

G24

G25

G26

G27

G28

G29

14.27

15.29

14.68

17.86

22.63

25.80

28.98

32.15

35.33

38.50

41.68

18.26

20.64

25.40

28.58

31.75

34.93

38.10

41.28

44.45

76.20

88.90

101.60

3.00

3.50

4.00

.562

.602

.578

.703

.891

1.016

1.141

1.266

1.391

1.516

1.641

.719

.812

1.000

1.125

1.250

1.375

1.500

1.625

1.750

G1

G2

G3

G4

G5

G6

G7

G8

G9

G11

G12

G13

G14

G15

G16

G17

G18

G19

8

10

12

14

16

18

20

22

24

8

10

12

14

16

18

20

22

24

8

10

12

14

16

18

20

22

24

WITHOUT

CHAIN WITH

CHAIN

A

+.001

-.005

F

MAX.

H

±.25

M

±.010

L

MAX.

DIMENSIONS IN MILLIMETERS

DASH NO.

SHELL

SIZE WITHOUT

CHAIN WITH

CHAIN

A

+.03

-.13

F

MAX.

H

±6.35

M

±.25

N

MIN.

DIMENSIONS IN INCHES

SHELL

SIZE WITHOUT

CHAIN WITH

CHAIN

WITH

CHAIN &

WASHER

HL

MAX.

Q

MAX.

N

MIN.

DIMENSIONS IN MILLIMETERS

SHELL

SIZE WITHOUT

CHAIN

WITH

CHAIN &

WASHER

HL

MAX.

Q

MAX.

DASH NO.

Contact Data

1000 VAC eff.

Test

Class

Contact ratings

20

Contact size

Pin16

Socket 20

Contact size

20 w/support cup

16

20 w/o support cup

16

857-0668-XXX

Socket 20 with wire well support

Service

13 A

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 13

ARRAY CONNECTOR CORPORATION

®

Contacts

Crimp contacts

1) Socket and pin with wire well support (size 20 only)

1)

Rated current

Test current

Voltage drop

7.5 A

55 mV

16

13 A

50 mV

Contacts for MS 312_ and PWF Series

Contact size

Socket 16

Pin 20 with wire well support

857-0670-XXX

857-0672-XXX

806-0673-XXX

Pin 20 806-0687-XXX

806-0688-XXX

806-0673-XXX

857-0668-XXX

806-0688-XXX

857-0672-XXX

806-0687-XXX

857-0670-XXX

M39029/31-240 M22520/1-01 +

M22520/2-01 + MS24256A20

MS24256A20

MS24256A16

MS24256A20

Insertion Tool

MS24256R20

MS24256R16

MS24256R20

Removal Tool

M22520/2-02

-----

M22520/2-01 +

M22520/2-02

M39029/32-259

M39029/31-228

M39029/32-247

M39029/31-223

M39029/32-242

20 w/support cup

Array P/N MS P/N Handcrimping tool

P

S

P

S

P

S

M22520/1-02

20 w/o support cup

1450 VDC

Ratings (sea level)

I

600 VAC eff.

850 VDC

1500 VAC eff.

II

2300 VAC eff.

Contact

Material

Copper alloy - Gold plate over nickel

MS 312_ and PWF_ connectors are normally supplied with size 20 contacts with wire well support.

All crimp contacts can be crimped, inserted and removed with commercially available appropriate tooling.

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

14

ARRAY CONNECTOR CORPORATION

®

Crimping Instructions

Cut wire to length and strip 1/4 inch of insulation

from end for use with size 16 contacts. Strip 3/16

inch from end for use with size 20 contacts. Hot

wire stripping is recommended. Avoid nicking

individual strands if other methods are used.

Insert and bottom wire in contact. Insulation must

extend into insulation wire well support. Check to

make certain strands are visible in the inspection

hole provided.

Insert wired contact into crimping tool, previously

arranged; see table on page 13.

Close tool handles to the full extent of their travel;

release pressure on handles and remove the

complete crimped contact/wire assembly. The

tool will automatically position for the next

crimping cycle.

Apneumatic crimping tool provided with magazine for

large capacity production is available on specialized

market.

15

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

ARRAY CONNECTOR CORPORATION

®

The automatic or hand crimping tool assures a

crimp joint which will meet MIL-T-22520.

Both tools, if properly maintained by a periodic

inspection, will provide a complete and uniform crimp

over many thousands of cycles.

Insert the contact into the correct contact hole.

Contact insertion tools are listed on the table

on page 13.

Insert the contact into the correct contact hole

of the integral grommet at the rear of the

assembly. Push contact forward in a line

parallel to the assembly until the contact

bottoms. A slight pressure may be noticed just

before contact reaches its fully seated position.

Sealing plugs must be used in all unused

circuits by placing the correct size plug behind

each uncrimped contact. Use MS27488-20

sealing plug for size 20 and MS27488-16 for

size 16.

Remove the contact by inserting tools listed on

the table on page 13. Fully bottom the tools tip

by slightly rotating the tool. Push the thrust

assist knob forward. The contact is now

disengaged and may be removed at the rear of the

assembly.

Crimping Instructions

ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601

www.arrayconnector.com C 2000 ARRAY CONNECTOR CORPORATION 0401 Printed in U.S.A.

Other Quality Connectors

Reverse Bayonet 5015 Connectors

Quick Disconnect Connectors

Solder and Crimp Types

Rugged Acme Thread Connectors

for Industrial Electrical Equipment

Distributed in U.S.A. by: Distributed in Europe by:

QPL’d MIL-C-26482 Series I

Solder and Crimp Connectors

Special Cryogenic Connectors

Buffet/Galley Connectors

Connectors, Receptacles and Plugs

Avio-Diepen B. V.

P. O. Box 566

2400 AN Alphen aan den Rijn

The Netherlands

Ph: 31-(0) 172-449777

Fax: 31-(0) 172-499789

E-mail: avio-diepen@avio-diepen.com