600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA 600W Surface Mount Transient Voltage Suppressor SMB Features z z z z z z Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR For unidirectional types Typical IR less than 1 A above 10V z z z High temperature soldering guaranteed:250C/10 seconds at terminals This series is UL recognized under component index. File number E315008 RoHS Compliant Mechanical Data JEDEC DO-214AA (SMB) molded plastic over glass passivated junction Case: Meets UL 94V-0 flammability rating Epoxy: Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Color band denoted positive end (cathode) except Bi-directional Polarity: Mounting position: Any 0.003 ounces, 0.093 gram Weight: Maximum Ratings (T Ambient=25C unless noted otherwise) Symbol Description PPPM Peak Pulse Power Dissipation on 10/1000s Waveform IPPM Peak Pulse Current on 10/1000s Waveform IFSM Peak Forward Surge Current Operating Junction and Storage TJ,TSTG Temperature Range Value Unit Conditions Minimum 600 W Non-repetitive current pulse, per FIG.3 and derated above TA=25 C per FIG.2 See Table A Non-repetitive current pulse 100 A 8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note 1,2) -55 to 150 C Note: 1. Mounted on 5.0mm x 5.0mm (0.03mm thick) copper pads to each terminal 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 (661)-257-6060 (661)-257-6415 Rev. D/AH 2008-02-25 Page 1 of 6 600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA Electrical Characteristics (T Ambient=25C unless noted otherwise) Part NO. Device Marking Code Reverse Stand-off Voltage Breakdown Voltage @ Test Current. V BR Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. P6SMB6.8A P6SMB6.8CA 6V8A 6V8C 5.8 6.45 7.14 P6SMB7.5A P6SMB7.5CA 7V5A 7V5C 6.4 7.13 7.88 IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM VC (V) IPPM (A) ID (A) Max. Clamping Voltage @ IT(mA) 10.5 58.1 1000/2000 10 11.3 54.0 500/1000 P6SMB8.2A P6SMB8.2CA 8V2A 8V2C 7.02 7.79 8.61 12.1 50.4 200/400 P6SMB9.1A P6SMB9.1CA 9V1A 9V1C 7.78 8.65 9.55 1 13.4 45.5 50/100 P6SMB10A P6SMB10CA 10A 10C 8.55 9.5 10.5 1 14.5 42.1 10/20 P6SMB11A P6SMB11CA 11A 11C 9.4 10.5 11.6 1 15.6 39.1 5/10 P6SMB12A P6SMB12CA 12A 12C 10.2 11.4 12.6 1 16.7 36.5 5/10 P6SMB13A P6SMB13CA 13A 13C 11.1 12.4 13.7 1 18.2 33.5 1 P6SMB15A P6SMB15CA 15A 15C 12.8 14.3 15.8 1 21.2 28.8 1 P6SMB16A P6SMB16CA 16A 16C 13.6 15.2 16.8 1 22.5 27.1 1 P6SMB18A P6SMB18CA 18A 18C 15.3 17.1 18.9 1 25.5 24.2 1 P6SMB20A P6SMB20CA 20A 20C 17.1 19 21 1 27.7 22.0 1 P6SMB22A P6SMB22CA 22A 22C 18.8 20.9 23.1 1 30.6 19.9 1 P6SMB24A P6SMB24CA 24A 24C 20.5 22.8 25.2 1 33.2 18.4 1 P6SMB27A P6SMB27CA 27A 27C 23.1 25.7 28.4 1 37.5 16.3 1 P6SMB30A P6SMB30CA 30A 30C 25.6 28.5 31.5 1 41.4 14.7 1 P6SMB33A P6SMB33CA 33A 33C 28.2 31.4 34.7 1 45.7 13.3 1 P6SMB36A P6SMB36CA 36A 36C 30.8 34.2 37.8 1 49.9 12.2 1 P6SMB39A P6SMB39CA 39A 39C 33.3 37.1 41 1 53.9 11.3 1 P6SMB43A P6SMB43CA 43A 43C 36.8 40.9 45.2 1 59.3 10.3 1 P6SMB47A P6SMB47CA 47A 47C 40.2 44.7 49.4 1 64.8 9.4 1 P6SMB51A P6SMB51CA 51A 51C 43.6 48.5 53.6 1 70.1 8.7 1 P6SMB56A P6SMB56CA 56A 56C 47.8 53.2 58.8 1 77 7.9 1 P6SMB62A P6SMB62CA 62A 62C 53 58.9 65.1 1 85 7.2 1 P6SMB68A P6SMB68CA 68A 68C 58.1 64.6 71.4 1 92 6.6 1 P6SMB75A P6SMB75CA 75A 75C 64.1 71.3 78.8 1 103 5.9 1 P6SMB82A P6SMB82CA 82A 82C 70.1 77.9 86.1 1 113 5.4 1 P6SMB91A P6SMB91CA 91A 91C 77.8 86.5 95.5 1 125 4.9 1 P6SMB100A P6SMB100CA 100A 100C 85.5 95 105 1 137 4.5 1 P6SMB110A P6SMB110CA 110A 110C 94 105 116 1 152 4.0 1 P6SMB120A P6SMB120CA 120A 120C 102 114 126 1 165 3.7 1 P6SMB130A P6SMB130CA 130A 130C 111 124 137 1 179 3.4 1 Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 2 of 6 600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA Electrical Characteristics (T Ambient=25C unless noted otherwise) Part NO. Device Marking Code Reverse Stand-off Voltage IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM Max. Clamping Voltage @ Breakdown Voltage @ Test Current. V BR Uni-Polar Bi-Polar Uni Bi V WM (V) Min. Max. IT(mA) VC (V) IPPM (A) ID (A) P6SMB150A P6SMB150CA 150A 150C 128 143 158 1 207 2.9 1 P6SMB160A P6SMB160CA 160A 160C 136 152 168 1 219 2.8 1 P6SMB170A P6SMB170CA 170A 170C 145 162 179 1 234 2.6 1 P6SMB180A P6SMB180CA 180A 180C 154 171 189 1 246 2.5 1 P6SMB200A P6SMB200CA 200A 200C 171 190 210 1 274 2.2 1 P6SMB220A P6SMB220CA 220A 220C 185 209 231 1 328 1.9 1 P6SMB250A P6SMB250CA 250A 250C 214 237 263 1 344 1.8 1 Note: For bi-directional type having VWM of 10V and less, the ID limit is double. Fig.2- Pulse Derating Curve Fig.1- Peak Pulse Power Rating Curve PPPM or IPPM, Derating in Percentage (%) PPPM - Peak Pulse Power Dissipation (KW) Typical Characteristics Curves Td - Pulse Width (sec.) Ta - Ambient Temperature (C) Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 3 of 6 600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA Fig.3- Pulse Waveform IPPM - Peak Pulse current (%) IFSM - Peak Forward Surge Current (A) Fig.4 - Max. Non-Repetitive Forward Surge Current Number of Cycles at 60Hz Fig.6- Typical Junction Capacitance Fig.5- Steady State Power Derating Curve CJ- Junction Capacitance PM(AV) Steady State Power Dissipation (W) T - Time (ms) VWM - Reverse Stand-Off Voltage (V) TL - Lead Temperature (C) Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 4 of 6 600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA Dimensions in inches (mm) SMB Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 5 of 6 600W Surface Mount Transient Voltage Suppressor P6SMB6.8A - P6SMB250CA How to contact us: US HEADQUARTERS 28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 824-8766 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: taitron@taitroncomponents.com Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTACOES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAUDE - SAO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN' AN ROAD, SUITE 1503, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 6 of 6