MIL-DTL-38999 Series III Type M29504/04 181-002 Size 16 MIL-DTL-38999 Series III Type Fiber Optic Pin Terminus D38999 Series III QPL Ultra low dB loss QPL'd pin terminus for MIL-DTL-38999 Series III Part Number Fiber Size Core/Cladding/Coating O A (Microns) 181-002-125 181-002-126S 181-002-126 181-002-127 181-002-142 181-002-144 181-002-145 181-002-156 181-002-157 181-002-173 181-002-175 181-002-231 181-002-236 181-002-286 181-002-448 181-002-533 Ref. M29504/04-XXXX 9/125 (Singlemode) 125.5 9/125 (Singlemode) 126.0 50/125 & 62.5/125 126.0 50/125 & 62.5/125 127.0 100/140 142.0 100/140 144.0 100/140 145.0 62.5/125/155 (Polyimide) 156.0 62.5/125/155 (Polyimide) 157.0 100/140/172 (Polyimide) 173.0 100/140/172 (Polyimide) 175.0 200/230 231.0 200/230 236.0 200/280 286.0 400/440 448.0 486/500 533.0 Consult factory for additional sizes and QPL status. M29504/04-4208 M29504/04-4209 M29504/04-4210 M29504/04-4040 M29504/04-4043 N/A M29504/04-4044 M29504/04-4211 M29504/04-4212 M29504/04-4087 M29504/04-4213 N/A M29504/04-4214 M29504/04-4215 M29504/04-4216 N/A .783 (19.9) .300 (7.6) .262 (6.7) Min. O .062 (1.6) OA .031 (0.8) O .069 (1.8) O.130 Max Shrink Tube .080 (2.0) Max Dia Cable .500 (12.7) Material and Finish Ferrule: Zirconia Ceramic Terminus Assembly: Stainless Steel/Passivate Shrink Tube: Kynar Notes See Glenair assembly procedure GAP-015 for complete termination instructions. Recommended Insertion/Extraction tool: P/N M81969/14-03 or equivalent (c) 2012 Glenair, Inc. U.S. CAGE Code 06324 Rev. 09.23.15 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-3 E-Mail: sales@glenair.com B