Multilayer Ceramic Capacitor Features: * * * * For General Purpose Capacitor Dielectric Material : Multilayer Ceramic Termination : Radial Leaded Lead Pitch : 2.54mm Ordering informations: MC 0805 B 104 K 500 2.54MM A B C D E F G A B C D E Product Type Unit : Inches Dielectric Capacitance Tolerance Chip Size (LxW) N COG (NPO) Code Chip B X7R 0805 0.08 x 0.05 Y Y5V 1206 0.12 x 0.06 F G Rated Voltage Packaging Style The code meaning is same as capacitance. For Example: 101=100V 500=50V Ammo First two digits are significant third digit is number of zeros. For Example: 104=100000pF 5R6=5.6pF C 0.25pF D 0.5pF J 5% K 10% M 20% Z +80% -20% 2.54mm 5.08mm Dimensions: www.element14.com www.farnell.com www.newark.com Page <1> 02/02/15 V1.2 Multilayer Ceramic Capacitor Dimensions (mm) Capacitance (pF) Size Code Shape F (0.5) H (1) L max. W max. T max. 0805 a b C1 C2 C3 2.54 2.54 5.08 5.08 5.08 5 10 5 / 10 5 5 / 10 4.2 3.8 3.8 1206 a b C1 2.54 3.50 5.08 3.8 10 5 4.5 Voltage NPO X7R Y5V 25V 50V 100V 0R5~332 0R5~222 0R5~102 331~104 331~104 331~104 103~105 103~684 25V 50V 100V 0R5~682 0R5~472 0R5~392 102~224 102~104 102~105 103~125 103~105 Packaging Style: Description Pitch Of Component Symbol Dimensions (mm) Remarks P 12.7 1.0 Cumulative Pitch Error : 1mm /20 Pitches Feedhold Pitch PO 12.7 0.3 For F:5.08, 5.10.7 For F:2.54 Feed Hold Center To Lead P1 3.85 0.7 Feed Hold Centre To Component Centre P2 8.35 1.3 To Lead Tip Within TOL F 5.08 +0.8/-0.2 or 2.5 +0.8/-0.2 The alignment form the center of the lead is 1.0mm Component Alignment, F-R H 2 Max. Tape Width W 18 1 Adhesive Tape Width W0 12 1 Hole Position W1 9 0.5 Adhesive Tape Must Not Protrude From Bade Paper Adhesive Tape Position W2 3 Max 6.5 <= H0-W1 Lead-Wire Clinch Height H0 15-20 0.5 Component Height H1 32.25 Max. Feed Hole Diameter D0 4 0.3 Total Tape Thickness T 0.7 0.2 Lead To Lead Spacing Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 02/02/15 V1.2