www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.202/02/15
Multilayer Ceramic Capacitor
Features:
• For General Purpose
• Capacitor Dielectric Material : Multilayer Ceramic
• Termination : Radial Leaded
• Lead Pitch : 2.54mm
Ordering informations:
MC 0805 B 104 K 500 2.54MM
↓↓↓↓↓↓↓
A B C D E F G
A
Product Type
D
Capacitance
First two digits are
signicant third digit
is number of zeros.
For Example:
104=100000pF
5R6=5.6pF
F
Rated Voltage
The code meaning is
same as capacitance.
For Example:
101=100V
500=50V
B
Unit : Inches
Chip Size (L×W)
Code Chip
0805 0.08 × 0.05
1206 0.12 × 0.06
C
Dielectric
N COG (NPO)
B X7R
Y Y5V
E
Tolerance
C ±0.25pF
D ±0.5pF
J ±5%
K ±10%
M ±20%
Z +80% -20%
G
Packaging Style
Ammo 2.54mm
5.08mm
Dimensions:
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.202/02/15
Multilayer Ceramic Capacitor
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Size Code Shape
Dimensions (mm)
Voltage
Capacitance (pF)
F
(±0.5)
H
(±1) L max. W max. T max. NPO X7R Y5V
0805
a
b
C1
C2
C3
2.54
2.54
5.08
5.08
5.08
5
10
5 / 10
5
5 / 10
4.2 3.8 3.8
25V
50V
100V
0R5~332
0R5~222
0R5~102
331~104
331~104
331~104
103~105
103~684
1206
a
b
C1
2.54
3.50
5.08
10 5 4.5 3.8
25V
50V
100V
0R5~682
0R5~472
0R5~392
102~224
102~104
102~105
103~125
103~105
Packaging Style:
Description Symbol Dimensions (mm) Remarks
Pitch Of Component P 12.7 ±1.0 Cumulative Pitch Error : ±1mm /20 Pitches
Feedhold Pitch PO 12.7 ±0.3 For F:5.08, 5.1±0.7 For F:2.54
Feed Hold Center To Lead P1 3.85 ±0.7
Feed Hold Centre To Component
Centre P2 8.35 ±1.3 To Lead Tip Within TOL
Lead To Lead Spacing F 5.08 +0.8/-0.2
or 2.5 +0.8/-0.2 The alignment form the center of the lead is ±1.0mm
Component Alignment, F-R ΔH 2 Max.
Tape Width W 18 ±1
Adhesive Tape Width W0 12 ±1
Hole Position W1 9 ±0.5 Adhesive Tape Must Not Protrude From Bade Paper
Adhesive Tape Position W2 3 Max 6.5 <= H0-W1
Lead-Wire Clinch Height H0 15-20 ±0.5
Component Height H1 32.25 Max.
Feed Hole Diameter D0 4 ±0.3
Total Tape Thickness T 0.7 ±0.2
