SPECIFICATION
Supplier : Samsung electro-mechanics
Samsung P/N : CL10B333KO8NNNC
Product : Multi-layer Ceramic Capacitor
Description : CAP, 33
, 16V, ±10%, X7R, 0603
CL 10 B 333 K O 8 N N N C
Series Samsung Multi-layer Ceramic Capacitor
Size 0603 (inch code) L: 1.6 ± 0.1 mm W: ± 0.1 mm
Dielectric X7R
Inner electrode
Capacitance 33 Termination
Capacitance ±10 % Plating (Pb Free)
tolerance
Product Normal
Rated Voltage 16 V
Special Reserved for future use
Thickness 0.8 ± 0.1 mm
Packaging Cardboard Type, 7" reel
B. Samsung Reliablility Test and Judgement condition
Capacitance Within specified tolerance 1±10% 1.0±0.2Vrms
Tan δ
δδ
δ (DF) 0.035 max.
Insulation 10,000Mohm or 100MohmRated Voltage 60~120 sec.
Resistance Whichever is Smaller
Appearance No abnormal exterior appearance Microscope (×10)
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature X7R
Characterisitcs (From -55 to 125, Capacitance change shoud be within ±15%)
Adhesive Strength No peeling shall be occur on the 500gF, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : within ±12.5% Bending to the limit (1mm)
with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5, 3±0.3sec.
(preheating : 80~120 for 10~30sec.)
Resistance to Capacitance change : within ±7.5% Solder pot : 270±5, 10±1sec.
Soldering heat Tan δ, IR : initial spec.
Sn 100%
Cu
Ni
0.8
Performance Test condition
250%
A. Samsung Part Number
Vibration Test Capacitance change : within ±5% Amplitude : 1.5mm
Tan δ, IR : initial spec. From 10 to 55 (return : 1min.)
2hours × 3 direction (x, y, z)
Moisture Capacitance change : within ±12.5% With rated voltage
Resistance
Tan δ :
0.05 max 40±2, 90~95%RH, 500+12/-0hrs
IR : 500Mohm or 25Mohm
Whichever is Smaller
High Temperature Capacitance change : within ±12.5%
With
of the rated voltage
Resistance
Tan δ :
0.05 max Max. operating temperature
IR : 1000Mohm or 50Mohm
Whichever is Smaller 1000+48/-0hrs
Temperature Capacitance change : within ±7.5% 1 cycle condition
Cycling Tan δ, IR : initial spec.
Min. operating temperature
25
Max. operating temperature 25
5 cycle test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.
200%
Performance Test condition