Emboss Tape SHD CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications ------------------- * Current rating: 1.0 A AC, DC (AWG #28) * Voltage rating: 50 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 20 m max. After environmental tests/ 40 m max. * Insulation resistance: 100 M min. * Withstanding voltage: 500 VAC/minute * Applicable wire: Conductor size/ AWG #32 to #28 Insulation O.D./ 0.4 to 0.8 mm 11 21 31 39 The SHD connector is compact with a mounting height of 6.3mm for top entry type and 5.5mm for side entry type, and a width of 5.0mm for top entry type and 5.1mm for side entry type. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. * Compact, low profile design * Anti-misinsertion feature * Receptacles with protrusions * Header designed for vacuum pick and place robotics Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout and Assembly layout Top entry type 0.90.1 Side entry type 0.850.1 5.4 Header outline 0.6 10.1 Circuit No.1 7.1 1.6 0.5 4 7.2 1.80.1 Header outline 0.6 0.850.1 1.6 0.90.1 1.80.1 with a boss 6.3 4.1 10.1 5.5 Circuit No.1 Header outline 0.9 1.5 1.250.1 0.7 0.850.1 5.1 0.7 0.5 0.850.1 0.6 10.1 4 0.7 5 0.7 Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. 0.550.05 0 Circuit No.1 7.2 1.90.1 1.80.1 1.5 Contact Model No. mm2 SSH-003GA-P0.2 0.0320.08 3.9 0.40.8 23,000 Phosphor bronze, nickel-undercoated, Mating part; gold-plated 0.8 1.55 RoHS compliance Note: Contact JST for tin-plated products. 0.8 1.35 0.5 3228 Q'ty/ reel Material and Finish 1.6 2 Applicable wire Insulation O.D. (mm) AWG# Contact Crimping machine Crimp applicator 0.45 SSH-003GA-P0.2 AP-K2N Applicator Dies Crimp applicator with dies MKS-L-10-3 MK/SSH/L-003-02 APLMK SSH/L003-02 *MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1 SHD CONNECTOR Housing C A 1 No.1 mark 4.9 Model No. 20 30 Dimensions (mm) Q'ty/box A B C SHDR-20V-S-B 9.0 11.2 13.0 4,000 SHDR-30V-S-B 14.0 16.2 18.0 4,000 40 SHDR-40V-S-B 19.0 21.2 23.0 2,000 50 SHDR-50V-S-B 24.0 26.2 28.0 2,000 Material 5 Circuit No.3 Circuits PBT, UL94V-0, natural (white) RoHS compliance 4.2 B Shrouded header Top entry type Circuits 20 30 40 4.25 50 Circuits 1 0.2 Circuit No.1 20 1.5 A 30 Circuit No.3 B 40 0.7 5 50 Model No. Top entry type BM20B-SRDS-G-TF BM30B-SRDS-G-TF BM40B-SRDS-G-TF BM50B-SRDS-G-TF Dimensions (mm) A B Model No. Side entry type Dimensions (mm) A B SM20B-SRDS-G-TF SM30B-SRDS-G-TF SM40B-SRDS-G-TF SM50B-SRDS-G-TF Q'ty/reel 9.0 12.3 1,500 14.0 17.3 1,500 19.0 22.3 1,500 24.0 27.3 1,500 Q'ty/reel 9.0 13.1 1,250 14.0 18.1 1,250 19.0 23.1 1,250 24.0 28.1 1,250 Material and Finish Side entry type Header contact: Phosphor bronze, nickel-undercoated, gold-plated Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Circuit No.3 Circuit No.1 RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the headers with tin-plated pins. 3. Contact JST for the top entry type headers with suction cap. 5.5 H JST 1 0.2 A 1.5 B 5.1 0.7 0.6 4.25 Top entry type with a boss 1 Circuit No.1 Circuit No.3 A B 0.5 0.85 Model No. 20 BM20B-SRDS-A-G-TF 19.0 12.3 1,250 30 BM30B-SRDS-A-G-TF 14.0 17.3 1,250 40 BM40B-SRDS-A-G-TF 19.0 22.3 1,250 50 BM50B-SRDS-A-G-TF 24.0 27.3 1,250 Q'ty/reel Material and Finish Header contact: Phosphor bronze, nickel-undercoated, gold-plated Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) 1.9 0.2 Dimensions (mm) A B Circuits 1.5 5 0.7 RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the headers with tin-plated pins. 2