F-219 TML-108-02-G-D-SM TML-132-02-L-D-SM TML-120-01-L-D-RA (1.27 mm) .050" TML SERIES SHROUDED MICRO HEADER Surface mount, right-angle and through-hole designs Mates with: SMS, RSM SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?TML APPLICATIONS Insulator Material: Black Liquid Crystal Polymer Insulation Resistance: 5000 MW min Terminal Material: Phosphor Bronze Plating: Au or Sn over 50 " (1.27 m) Ni Operating Temp Range: -55 C to +105 C with Tin; -55 C to +125 C with Gold RoHS Compliant: Yes SMS (10.92) .430 TML (11.40) .449 RSM PROCESSING (1.27 mm) .050" (2.54 mm) .100" TML Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.15 mm) .006" max* *(.004" stencil solution may be available; contact IPG@samtec.com) 1 TML RECOGNITIONS NO. PINS PER ROW For complete scope of recognitions see www.samtec.com/quality FILE NO. E111594 05, 08, 10, 20, 32 ALSO AVAILABLE (Standard sizes) (MOQ Required) LEAD STYLE PLATING OPTION Specify LEAD STYLE from chart = 10 " (0.25 m) Gold on post, Matte Tin on tail -L -G = 10 " (0.25 m) Gold on post, Gold flash on tail * Other sizes * Other platings 02 -02 -03 (3.56) .140 (0.38) .015 (5.84) .230 (4.32) .170 (7.62) .300 (9.65) .380 = Polarized position (Specify position of omitted pin) -SM (0.76) .030 A Surface Mount (1.75) .069 (3.68) .145 (3.05) .120 A (2.67) .105 (0.51) .020 DIA TYP -"XXX" = Surface Mount (For locking clip add -LC) (2.54) .100 (0.46) .018 SQ TYP Note: Some sizes, styles and options are non-standard, non-returnable. -RA = Right-angle POST LEAD STYLE HEIGHT (A) (3.05) -01 .120 (9.40) .370 (6.60) .260 01 OTHER OPTION (1.27) .050 (1.27) .050 x No. of Positions + (3.18) .125 (1.27) .050 x No. of Positions + (0.64) .025 (1.27) .050 (2.54) .100 TAIL OPTION D Through-Hole (1.14) .045 (2.54) .100 Right-angle Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.