LCA710 Single Pole OptMOS(R) Relay Blocking Voltage Load Current Max RON LCA710 60 1 0.5 Units VP A Features * Small 6 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount and Tape & Reel Versions Available Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Description LCA710 is a 60V, 1A, 0.5 1-Form-A relay. It features a high peak load current capability of up to 1 Amp. Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * Certified to: * EN 60950 * EN 41003 Ordering Information Part # LCA710 LCA710R LCA710RTR LCA710S LCA710STR Description 6 Pin DIP (50/Tube) 6 Pin Low-Profile Surface Mount (50/Tube) 6 Pin Low-Profile Surface Mount (1000/Reel) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration LCA710 Pinout AC/DC Configuration + Control - Control Do Not Use 1 6 2 5 3 4 Load Do Not Use Load LCA710 Pinout DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ TON DS-LCA710-R07 www.clare.com TOFF 1 LCA710 Absolute Maximum Ratings (@ 25C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mw/C 2 Derate Linearly 6.67 mw/C Ratings 60 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics Parameter Output Characteristics @ 25C Load Current AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance 2 Conditions Symbol Min Typ Max Continuous IL - - 10ms ILPK - - 1.0 1.8 5.0 0.5 0.15 1 Units A A IL=1A IL=1.8A VL=60V RON - ILEAK - 0.3 0.1 - IF=10mA, VL=10V IF=10mA, VL=10V 0V; f=1MHz TON TOFF - - - - 105 2.5 0.25 - IL=1A IF=10mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 10 1.4 10 mA mA V A - CI/O - 3 - pF www.clare.com A ms pF R07 LCA710 PERFORMANCE DATA* 35 20 15 10 25 20 15 10 1.17 25 1.19 1.21 1.23 0.215 LED Forward Voltage (V) 0.197 0.199 0.201 0.203 On-Resistance () LCA710 Typical IF for Switch Operation (N=50, TA=25C, IL=1ADC) LCA710 Typical IF for Switch Dropout (N=50, TA=25C, IL=1ADC) 25 Device Count (N) 20 15 10 5 0.90 25 0.95 1.00 1.05 1.10 20 15 10 5 72 0.95 1.00 1.05 1.10 LCA710 Typical Turn-Off Time (N=50, TA=25C, IL=1ADC, IF=10mA) LCA710 Typical Load Current vs. Temperature Leakage (A) Load Current (mA) 800 IF = 5mA 600 400 -40 0.103 0.30 0.33 0.36 0.39 0.017 0.016 0.015 0.014 0.013 -20 0 20 40 60 80 100 0 -40 120 -20 0 20 40 60 80 Turn-Off (ms) Temperature (C) Temperature (C) LCA710 Typical Blocking Voltage vs. Temperature LCA710 Typical Turn-On vs. Temperature (IL=1ADC) LCA710 Typical Turn-Off vs. Temperature (IL=1ADC) 1.4 80.0 1.2 79.0 1.0 Turn-On (ms) 81.0 78.0 77.0 76.0 75.0 0.8 0.6 IF = 10mA 0.4 0 20 40 60 Temperature (C) 80 100 0.10 IF = 10mA 0.08 0.06 IF = 5mA 0.04 0.02 0 -20 100 0.12 IF = 5mA 0.2 74.0 73.0 -40 0.14 Turn-Off (ms) Device Count (N) Blocking Voltage (VP) 0.098 0.27 0.018 IF = 10mA 1000 0 0.093 5 0.019 200 0.088 10 LCA710 Typical Leakage vs. Temperature Measured Across Pins 4 & 6 1200 0.078 0.083 15 Turn-On (ms) 1400 0 LCA710 Typical Turn-On Time (N=50, TA=25C, IL=1ADC, IF=10mA) 0.24 LED Current (mA) 5 82 20 1.15 LED Current (mA) 10 74 76 78 80 Blocking Voltage (VP) 0 0.90 15 10 25 1.15 20 15 0.205 0 0 20 0 0 1.25 25 5 5 0 LCA710 Typical Blocking Voltage Distribution (N=50, TA=25C) 30 Device Count (N) 25 5 Device Count (N) 35 30 Device Count (N) Device Count (N) 30 LCA710 Typical On-Resistance Distribution (N=50, TA=25C, IL=1ADC, IF=10mA) Device Count (N) 35 LCA710 Typical LED Forward Voltage Drop (N=50, TA=25C, IF=10mA) 0 -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R07 www.clare.com 3 LCA710 PERFORMANCE DATA* 1.2 1.0 0.8 -40 0.45 -20 0 20 40 60 80 100 120 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 0 5 10 15 20 25 30 35 40 45 0 50 5 10 15 20 25 30 35 40 50 45 Temperature (C) Forward Current (mA) LED Forward Current (mA) LCA710 Typical On-Resistance vs. Temperature (IL=1ADC, IF=10mA) LCA710 Typical IF for Switch Operation vs. Temperature (IL=1ADC) LCA710 Typical Load Current vs. Load Voltage (TA=25C, IF=10mA) 0.40 0.35 LED Current (mA) On-Resistance () 0.09 Turn-Off (ms) IF = 50mA IF = 30mA IF = 20mA IF = 10mA Turn-On (ms) 1.6 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 -20 0 20 40 60 80 100 1.01 1.00 0.99 0.98 0.97 0.96 0.95 0.94 0.93 0.92 0 -40 -20 0 20 40 60 Temperature (C) Temperature (C) 1000 800 600 400 200 0 -200 -400 -600 -800 -1000 -0.3 Load Current (mA) LED Forward Voltage Drop (V) 1.8 1.4 LCA710 Typical Turn-Off vs. LED Forward Current (IL=1ADC) LCA710 Typical Turn-On vs. LED Forward Current (IL=1ADC) LCA710 Typical LED Forward Voltage Drop vs. Temperature 80 100 -0.2 -0.1 0 0.1 0.2 0.3 Load Voltage (V) LCA710 Energy Rating Curve 8 Load Current (A) 7 6 5 4 3 2 1 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R07 LCA710 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 6-Pin DIP Thru-Hole Package 8.382 0.381 (0.330 0.015) PC Board Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 3.302 0.051 (0.130 0.002) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 1.651 0.254 (0.065 0.010) 6 - 0.800 DIA. (6 - 0.031 DIA.) 7.620 0.254 (0.300 0.010) 0.254 TYP (0.010 TYP) 7.620 0.127 (0.300 0.005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) 6-Pin Surface Mount Low Profile Package ("R" Suffix) 8.383 0.381 (0.330 0.015) 9.525 0.254 (0.375 0.010) Recommended PCB Land Pattern 6.350 0.127 (0.250 0.005) 1.523 0.051 (0.060 0.002) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 2.54 0.127 (0.100 0.005) 7.620 0.254 (0.300 0.010) 1.55 (0.061) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 1.651 0.254 (0.065 0.010) 3.479 0.076 (0.137 0.003) 3.302 0.051 (0.130 0.002) R07 Dimensions mm (inches) 0.178 0.076 (0.007 0.003) www.clare.com 5 6-Pin Surface Mount Package ("S" Suffix) Recommended PCB Land Pattern 2.54 (0.10) 0.635 0.127 (0.025 0.005) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 9.524 0.508 (0.375 0.020) 0.457 0.076 (0.018 0.003) 8.90 (0.3503) 1.65 (0.0649) 6.350 0.127 (0.250 0.005) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 1.651 0.254 (0.065 0.010) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 3.302 0.051 (0.130 0.002) Tape and Reel Packaging for 6-Pin "R" and "S" Suffix Parts 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W = 16.00 MAX (0.63 MAX) B0 = 10.10 (0.400) Top Cover Tape K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.400) Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-LCA710-R07 (c)Copyright 2008, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/20/08