Bulletin I27402 rev. B 09/06 IRKD600.. SERIES SUPER MAGN-A-pakTM Power Modules STANDARD DIODES Features High current capability 3000 VRMS isolating voltage with non-toxic substrate 600 A High surge capability High voltage ratings up to 2000V Industrial standard package UL E78996 approved RoHS Compliant Typical Applications Rectifying bridge for large motor drives Rectifying bridge for large UPS Major Ratings and Characteristics Parameters IRKD600.. Units 600 A 100 C 942 A @ TC 100 C @ 50Hz 19.0 KA @ 60Hz 20.1 KA @ 50Hz 1805 KA2s @ 60Hz 1683 KA2s 18050 KA2s IF(AV) @ TC IF(RMS) IFSM I2t I2t VRRM range 800 to 2000 V TSTG range - 40 to 150 C TJ range - 40 to 150 C Document Number: 93583 www.vishay.com 1 IRKD600.. Series Bulletin I27402 rev. B 09/06 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code IRKD600.. VRRM , maximum repetitive peak reverse voltage V VRSM , maximum nonrepetitive peak rev. voltage V 08 800 900 12 1200 1300 16 1600 1700 20 2000 2100 IRRM max. @ TJ max. mA 50 Forward Conduction Parameter I F(AV) IRKD600.. Units Conditions Maximum average forward current 600 A @ Case temperature 100 C I F(RMS) Maximum RMS forward current 942 A I FSM Maximum peak, one-cycle forward, 19.0 KA non-repetitive surge current I2t Maximum I2t for fusing I t Maximum I t for fusing 2 180 conduction, half sine wave @ TC = 100C t = 10ms No voltage 20.1 t = 8.3ms reapplied 16.2 t = 10ms 100% VRRM 17.2 t = 8.3ms reapplied Sinusoidal half wave, t = 10ms No voltage Initial TJ = TJ max. 1683 t = 8.3ms reapplied 1319 t = 10ms 100% VRRM t = 8.3ms reapplied 1805 KA2s 1230 2 180 conduction, half sine wave 18050 VF(TO)1 Low level value of threshold voltage 0.70 VF(TO)2 High level value of threshold voltage 0.77 r f1 Low level value of forward slope resistance 0.28 r f2 High level value of forward slope resistance 0.25 VFM Maximum forward voltage drop 1.24 KA s t = 0.1 to 10ms, no voltage reapplied 2 V (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. (I > x IF(AV)), TJ = TJ max. m (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. (I > x IF(AV)), TJ = TJ max. V Ipk = 1800A, TJ = 25C, tp = 10ms sine pulse Blocking Parameter V INS RMS isolation voltage I RRM Maximum peak reverse and off-state IRKD600.. Units Conditions 3000 V 50 mA t=1s TJ = TJ max., rated VRRM applied leakage current Document Number: 93583 www.vishay.com 2 IRKD600.. Series Bulletin I27402 rev. B 09/06 Thermal and Mechanical Specifications Parameter IRKD600.. TJ Max. junction operating temperature range - 40 to 150 Tstg Max. storage temperature range - 40 to 150 R thJC Max. thermal resistance, junction to Units Conditions C 0.065 K/W 0.02 K/W 6-8 Nm Per junction, DC operation case R thC-hs Max. thermal resistance, case to heatsink T Mounting torque 10%SMAP to heatsink busbar to SMAP wt 12 - 15 Approximate weight 1500 Case style g SUPER MAGN-A-pak A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound See outline table RthJC Conduction (The following table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction Units Conditions 180 0.009 0.006 120 0.011 0.011 90 0.014 0.015 K/W 60 0.021 0.022 30 0.037 TJ = TJ max. 0.038 Ordering Information Table 1 ~ Device Code 1 - IRK D 600 1 2 3 - 20 4 Module type 2 - Circuit configuration D = 2 diodes in series 3 - Current rating 4 - Voltage code: Code x 100 = VRRM (See Voltage Ratings Table) + 2 3 Document Number: 93583 www.vishay.com 3 IRKD600.. Series Bulletin I27402 rev. B 09/06 Outline Table 150 IRKD600.. Series R thJC (DC) = 0.065 K/ W 140 130 Conduction Angle 120 110 100 30 60 90 120 90 180 80 0 100 200 300 400 500 600 700 Maximum Allowab le Ca se Temperature (C) Ma ximum Allowable Case Temperature (C) All dimensions in millimeters (inches) 150 IRKD600.. Series R thJC (DC) = 0.065 K/ W 140 130 120 Conduction Period 110 60 100 30 90 90 120 180 DC 80 0 200 400 600 800 1000 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics Document Number: 93583 www.vishay.com 4 IRKD600.. Series 700 180 120 90 60 30 600 500 RMS Limit 400 300 Conduction Angle 200 IRKD600.. Series Per Junction TJ = 150C 100 0 0 100 200 300 400 500 1000 DC 180 120 90 60 30 900 800 700 600 500 RMS Limit 400 Conduction Period 300 IRKD600.. Series Per Junction TJ= 150C 200 100 0 0 600 200 400 600 800 1000 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics 18000 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) Bulletin I27402 rev. B 09/06 At Any Rated Load Condition And With Rated VRRM Applied Following Surge. 16000 Initial TJ= 150C @60 Hz 0.0083 s 14000 @50 Hz 0.0100 s 12000 10000 8000 IRKD600.. Series Per Junc tion 6000 4000 1 10 100 20000 Maximum Non Repetitive Surge Current Versus Pulse Train Dura tion. Initial TJ = 150C No Voltage Reapplied Rated VRRM Rea pplied 18000 16000 14000 12000 10000 8000 IRKD600.. Series Per Junction 6000 4000 0.01 0.1 Numb er Of Equa l Amplitude Half Cyc le Current Pulses (N) Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 1000 = 2 0.0 W K/ ta el -D 0.2 5K /W 0.3 5K /W 0.5 K /W R IRKD600.. Series Per Junc tion TJ = 150C 200 SA 400 W K/ 180 (Sine) R th K/ W 0. 12 K/ W 0.1 6K /W 800 600 W K/ 0. 08 DC 04 0. 06 0. Maximum Total Forward Power Loss (W) 1 0 0 200 400 600 800 Total RMSOutput Current (A) 0 1000 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Fig. 7 - Forward Power Loss Characteristics Document Number: 93583 www.vishay.com 5 IRKD600.. Series Bulletin I27402 rev. B 09/06 SA = /W 1K 0.0 ta el -D K/ W 0. 04 K/ W 0.0 5K /W 1500 R th 2000 W K/ 0. 03 180 (Sine) 180 (Rec t) 2500 02 0. 0.0 8K /W 0.12 1000 2 x IRKD600.. Series Single Phase Bridge Connected TJ = 150C 500 R Maximum Total Power Loss (W) 3000 K/ W 0.2 K / W 0 0 200 400 600 800 1000 1200 0 Total Output Current (A) 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Fig. 8 - Forward Power Loss Characteristics R th 4000 SA 0. 02 3000 2500 ta el -D K/ W 0.0 3K /W W K/ 120 (Rec t) 01 0. 3500 = R Maximum Total Power Loss (W) 4500 0.0 5K /W 2000 1500 3 x IRKD600.. Series Three Phase Bridge Connected T J = 150C 1000 500 0.08 K/ W 0.12 K /W 0.2 K/ W 0 0 300 600 900 1200 1500 Total Output Current (A) 1800 0 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Instantaneous Forward Current (A) 10000 1000 TJ= 25C TJ= 150C IRKD600.. Series Per Junction 100 0.5 1 1.5 2 2.5 3 3.5 Instantaneous Forward Voltage (V) Fig. 10 - Forward Voltage Drop Characteristics Document Number: 93583 Transient Thermal Impedance ZthJC (K/ W) Fig. 9 - Forward Power Loss Characteristics 0.1 IRKD600.. Series Per Junc tion 0.01 Steady State Value: RthJC = 0.065 K/ W (DC Operation) 0.001 0.001 0.01 0.1 1 10 100 Square Wave Pulse Duration (s) Fig. 11 - Thermal Impedance ZthJC Characteristic www.vishay.com 6 IRKD600.. Series Bulletin I27402 rev. B 09/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 09/06 Document Number: 93583 www.vishay.com 7 Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier's Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. International Rectifier(R), IR(R), the IR logo, HEXFET(R), HEXSense(R), HEXDIP(R), DOL(R), INTERO(R), and POWIRTRAIN(R) are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product names noted herein may be trademarks of their respective owners. Document Number: 99901 Revision: 12-Mar-07 www.vishay.com 1