RS801 RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION RS807 SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes FEATURES * * * * * * Low leakage Low forward voltage Mounting position: Any Surge overload rating: 250 amperes peak Ideal for printed circuit boards High forward surge current capability RS-8 MECHANICAL DATA .935 (23.7) .895 (22.7) * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .15 x .23L (3.8 x 5.7L) HOLE THRU .300 (7.5) .700 (17.8) .600 (16.8) .780 (19.8) .740 (18.8) AC 1.00 (25.4) MIN. .052 (1.3) DIA. .048 (1.2) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .220 (5.6) .180 (4.6) .140 (3.5) Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .280 (7.1) .268 (6.8) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) SYMBOL RS801 RS802 RS803 RS804 RS805 RS806 RS807 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 RATINGS Maximum Average Forward Rectified Output Current at Tc = 75 oC IO 8.0 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load I FSM 250 Typical Thermal Resistance (Note 1) RJA 18 (Note 2) RJC 7 T J, T STG -55 to + 150 with heat sink Operating and Storage Temperature Range Volts Amps Amps 0 C/ W 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per element at 8.0A DC Maximum Reverse Current at Rated @T A = 25 o C DC Blocking Voltage per element @T A = 125 o C VF RS801 RS802 RS803 RS804 RS806 RS807 UNITS Volts 5.0 uAmps 1.0 mAmps IR NOTES:1.Units mounted in free air, no heatsink, P.C.B. at 0.375" (9.5mm) lead length with 0.5x0.5" (12x12mm) copper pads. 2.Units mounted on a 3.0x3.0x0.11" thick (7.5x7.5x0.3cm) Al. Plate heatsink. 3. "Fully ROHS compliant", "100% Sn plating (Pb-free)". RS805 1.2 2005-3 REV: A TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 30 POWER DISSIPATION 28 sine wave Tj=150 20 10 5 2 TC = 150 (TYP) TC = 25 (TYP) 1 0.5 0.2 POWER DISSIPATION PF(W) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES (RS801 THRU RS807) 24 20 16 12 8 4 pulse test per one diode 0 0.1 0.4 0.6 0.8 1 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 4 6 8 9 260 IFSM AVERAGE FORWARD CURRENT, (A) sine wave 0 200 8.3ms 8.3ms 1 cycle non-repetitive Tj=25 100 0 1 2 5 10 20 NUMBER OF CYCLE 50 100 12 10 14 TYPICAL FORWARD CURRENT DERATING CURVE SURGE FORWARD CURRENT CAPABILITY PEAK FORWARD SURGE CURRENT, (A) 2 AVERAGE RECTIFIED FORWARD CURRENT, Io (A) heatsink Tc Tc 8 7 6 sine wave R-load on heatsink 5 4 3 2 1 0 0 25 50 75 100 125 CASE TEMPERATURE, ( 150 ) RECTRON 175