LED Lamps and LED Lampholders - Designed to IP66 LED Lampholders can be supplied with or without lamps Colours: To create a catalogue number: Refer to the 2 columns below (terminal and type) Red, Yellow and Green LEDs (High Intensity is standard. Option of extra super bright) Then state: LED colour and voltage and body finish (Black or Chrome) Voltages: LEDs are available for direct connection to 2.0/2.2V. or 12Vdc For other voltages contact the factory TERM W TYPE (W) 1048 OA PANEL & C DIMENSIONS (mm) Designed to IP66 1.0 8.0 LED fitted 5.5max A 2.0 T85 LED not fitted 5mm LED L L 1048 OA Designed to IP66 11.0 15.5 O 9.5 1.0 8.0 5.5max 2.0 T85 LED & Wires fitted 5mm LED W (W) 1050 OA Designed to IP66 11.0 15.5 O 9.5 1.0 8.0 LED fitted 7.0max A 2.9 T85 LED not fitted 5mm LED with focusing reflector L L 1050 OA 13.4 17.9 Designed to IP66 O 10.0 1.0 8.0 7.0max 2.9 LED & Wires fitted T85 5mm LED with focusing reflector 13.4 17.9 O10.0 Properties Sealing O-ring sealing equivalent to IP66, of both the LED to bezel, and bezel to panel is available where shown LED wires or PVC covered wire leads 125mm min length wires, 6.3mm standard strip Alternative colours, length and strip available Polarity The nylon base mouldings are polarity marked Body Material and Finish Chromed brass or Black oxide coated brass Lampholders only Items prefixed `A' are supplied without LEDs 77 tel: +44 (0)20 8979 3232 * Arcolectric * email: info@arcoswitch.co.uk