Rev. No.
C
Revision Note
Web Site 2001
Date
1-2-01
Signature
RG
PART NUMBER
SPECIFICATION
Comus Group of Companies PRODUCT DATA SHEET
CONTACT FORM/STYLE
SWITCHING VOLTAGE
SWITCHING CURRENT
SWITCHING CAPACITY (RESISTIVE)
DIFFERENTIAL ANGLE
CONTACT RESISTANCE
OPERATING TEMPERATURE
STORAGE TEMPERATURE
CASE MATERIAL
MOUNTING CLIPS
FEATURES
Max. Vac
Max. A
Max. VA
Max. Deg˚
Max. Ω
Deg. ˚C
Deg. ˚C
See above
240
1.0
120
10
-
-25˚ + 80˚
-25˚ + 85˚
Steel-tin plated
3BH
AC only
TILT SWITCH - Non Mercury Contacts CW3006-0
Drawings not to scale
All dimensions in mm (inches) nominal
FORM AE043 ISS1
As part of the company policy of continued product improvement, specifications may change without notice. Our sales
office will be pleased to help you with the latest information on this product range and details of our full design and
manufacturing service. All products are supplied to our standard conditions of sale otherwise agreed in writing.
©2001 Copyright Comus Group of Companies
24.0
(.94)
9.1ø (.36) Max.
Pin 0.2ø (.08)
16.0
(.63)
NOTE: When cutting or bending switch leads it is important that the glass seal is not damaged. The cutting or bending point
should be no closer than 3mm to the glass to metal seal and the lead should be supported between the cutting or bending point
and the glass to metal seal.
The Comus Group of Companies
consist of:
Assemtech Europe Limited
E. Bachem GmbH
Comus International
W. Gunther GmbH
Gunther Belgium
Gunther France
S.T.G.
CONTACT FORM / STYLE
These switches operate when tilted from the horizontal position.
The switch movement required to cause contact change (exam-
ple off to on) is called the differential angle.
It is very important when designing a tilt switch to allow for the
differential angle and understand that when in the horizontal
position the switch contact may be open or closed.
Horizontal
Contact
open
Contact
closed
Differential
angle
