1N4614UR-1 thru 1N4627UR-1e3, 1N4099UR-1 thru 1N4135UR-1e3 Available on commercial versions METALLURGICALLY BONDED GLASS SURFACE MOUNT 0.5 WATT ZENERS Qualified Levels: JAN, JANTX, JANTXV and JANS Qualified per MIL-PRF-19500/435 DESCRIPTION The 1N4099UR-1 thru 1N4135UR-1 and 1N4614UR-1 thru 1N4627UR-1 series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5% tolerance. 1% and 2% tolerance versions are also available (see part nomenclature). These also have an internal metallurgical bond. This type of internally bonded Zener package construction is also military qualified up to a JANS level for higher reliability applications. Microsemi also offers numerous other Zener products to meet higher and lower power applications. DO-213AA Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * * * Surface mount equivalent to JEDEC registered 1N4099 thru 1N4135 and 1N4614 thru 1N4627 series. Internal metallurgical bond. JAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/435. RoHS compliant versions available (commercial grade only). Also available in: DO-35 package (axial-leaded) 1N4099 - 1N4135 and 1N4614 - 1N4627 DO-216 package (tabbed surface mount) 1PMT4100 - 1PMT4135 and 1PMT4621 - 1PMT4627 APPLICATIONS / BENEFITS * * * * * * * Regulates voltage over a broad operating current and temperature range. Extensive selection from 1.8 to 100 volts. Standard voltage tolerance is plus or minus 5% with tighter tolerances available at plus or minus 2% or 1%. Hermetically sealed surface mount package. Non-sensitive to ESD per MIL-STD-750 method 1020. Minimal capacitance (see Figure 3). Inherently radiation hard as described in Microsemi MicroNote 050. MAXIMUM RATINGS @ T C = +25 C unless otherwise specified Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Ambient Thermal Resistance Junction-to-End Cap (2) Steady-State Power Dissipation Forward Voltage @ 200 mA Solder Temperature @ 10 s Symbol Value TJ and TSTG R JA R JEC PD VF TSP -65 to +175 300 100 0.5 1.1 260 Unit o C C/W o C/W W V o C o Notes: 1. When mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page). o 2. At end cap temperature T EC < 125 C or at ambient T A < 50 C when mounted on FR4 PC board as described for thermal resistance above (see Figure 2 for derating). MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com T4-LDS-0245, Rev. 1 (120179) (c)2012 Microsemi Corporation Page 1 of 5 1N4614UR-1 thru 1N4627UR-1e3, 1N4099UR-1 thru 1N4135UR-1e3 MECHANICAL and PACKAGING * * * * * * * CASE: Hermetically sealed glass DO-213AA (SOD80 or CDLL34) MELF style package. TERMINALS: End caps tin-lead (Sn/Pb) or RoHS compliant annealed matte-tin (on commercial grade only) plating solderable per MIL-STD-750, method 2026. POLARITY: Cathode indicated by banded end. Diode is to be operated with the banded end positive with respect to the opposite end for Zener regulation. MARKING: Cathode band only. TAPE & REEL option: Standard per EIA-481-1-A with 12 mm tape (add "TR" suffix to part number). Consult factory for quantities. WEIGHT: 0.04 grams. See Package Dimensions on last page. PART NOMENCLATURE JAN 1N4099 C UR -1 (e3) Reliability Level JAN = JAN level JANTX = JANTX level JANTXV = JANTXV level JANS = JANS level Blank = Commercial RoHS Compliance e3 = RoHS compliant (available on commercial grade only) Blank = non-RoHS compliant Metallurgically Bonded JEDEC type number (See Electrical Characteristics table) Surface Mount Package Zener Voltage Tolerance Blank = 5% C = 2% D = 1% SYMBOLS & DEFINITIONS Definition Symbol IR I Z, I ZT, I ZK I ZM ND VR VZ Z ZT or Z ZK Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Regulator Current: The dc regulator current (I Z), at a specified test point (I ZT), near breakdown knee (I ZK ). Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. Noise Density: The noise generated over a specified frequency bandwidth usually specified in terms of mV/ Hz. Reverse Voltage: The reverse voltage dc value, no alternating component. Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z) in its breakdown region. Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of I ZT or I ZK ) and superimposed on I ZT or I ZK respectively. T4-LDS-0245, Rev. 1 (120179) (c)2012 Microsemi Corporation Page 2 of 5 1N4614UR-1 thru 1N4627UR-1e3, 1N4099UR-1 thru 1N4135UR-1e3 ELECTRICAL CHARACTERISTICS @ 25 C unless otherwise stated INDUSTRY PART NUMBER (Note 1) 1N4614UR-1 1N4615UR-1 1N4616UR-1 1N4617UR-1 1N4618UR-1 1N4619UR-1 1N4620UR-1 1N4621UR-1 1N4622UR-1 1N4623UR-1 1N4624UR-1 1N4625UR-1 1N4626UR-1 1N4627UR-1 1N4099UR-1 1N4100UR-1 1N4101UR-1 1N4102UR-1 1N4103UR-1 1N4104UR-1 1N4105UR-1 1N4106UR-1 1N4107UR-1 1N4108UR-1 1N4109UR-1 1N4110UR-1 1N4111UR-1 1N4112UR-1 1N4113UR-1 1N4114UR-1 1N4115UR-1 1N4116UR-1 1N4117UR-1 1N4118UR-1 1N4119UR-1 1N4120UR-1 1N4121UR-1 1N4122UR-1 1N4123UR-1 1N4124UR-1 1N4125UR-1 1N4126UR-1 1N4127UR-1 1N4128UR-1 1N4129UR-1 1N4130UR-1 1N4131UR-1 1N4132UR-1 1N4133UR-1 1N4134UR-1 1N4135UR-1 MICROSEMI PART NUMBER (Note 1) CDLL4614-1 CDLL4615-1 CDLL4616-1 CDLL4617-1 CDLL4618-1 CDLL4619-1 CDLL4620-1 CDLL4621-1 CDLL4622-1 CDLL4623-1 CDLL4624-1 CDLL4625-1 CDLL4626-1 CDLL4627-1 CDLL4099-1 CDLL4100-1 CDLL4101-1 CDLL4102-1 CDLL4103-1 CDLL4104-1 CDLL4105-1 CDLL4106-1 CDLL4107-1 CDLL4108-1 CDLL4109-1 CDLL4110-1 CDLL4111-1 CDLL4112-1 CDLL4113-1 CDLL4114-1 CDLL4115-1 CDLL4116-1 CDLL4117-1 CDLL4118-1 CDLL4119-1 CDLL4120-1 CDLL4121-1 CDLL4122-1 CDLL4123-1 CDLL4124-1 CDLL4125-1 CDLL4126-1 CDLL4127-1 CDLL4128-1 CDLL4129-1 CDLL4130-1 CDLL4131-1 CDLL4132-1 CDLL4133-1 CDLL4134-1 CDLL4135-1 NOMINAL ZENER VOLTAGE ZENER TEST CURRENT V Z @ I ZT I ZT (Note 2) Volts 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 82 87 91 100 MAXIMUM ZENER IMPEDANCE MAXIMUM REVERSE CURRENT MAXIMUM NOISE DENSITY MAXIMUM ZENER CURRENT Z ZT IR @ V R N D @ I ZT I ZM V/Hz 1 1 1 1 1 1 1 1 1 1 1 2 4 5 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 mA 120 110 100 95 90 87 85 83 80 77 75 70 65 61 56 51 46 44 42 38 35 32 29 27 25 24 22 21 20 19 17 16 15 14 14 13 12 11 9.8 8.9 8.1 7.5 6.7 6.4 6.1 5.6 5.1 4.6 4.4 4.2 3.8 (Note 3) A 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Ohms 1200 1250 1300 1400 1500 1600 1650 1700 1650 1600 1550 1500 1400 1200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 150 150 150 150 150 150 200 200 200 200 200 250 250 300 300 400 500 700 700 800 1000 1200 1500 A 3.5 2.5 2.0 1.0 0.5 0.4 3.5 3.5 2.5 2.0 5.0 5.0 5.0 5.0 1.0 1.0 0.5 0.5 0.5 0.5 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Volts 1 1 1 1 1 1 1 2 2 2 3 3 4 5 5.17 5.70 6.24 6.61 6.92 7.60 8.44 9.12 9.87 10.65 11.40 12.15 12.92 13.67 14.44 15.20 16.72 18.25 19.00 20.45 21.28 22.80 25.08 27.38 29.65 32.65 35.75 38.76 42.60 45.60 47.10 51.68 57.00 62.32 66.12 69.16 76.00 TYPICAL TEMP.COEFF. OF ZENER VOLTAGE VZ %/oC -0.075 -0.075 -0.075 -0.075 -0.075 -0.075 -0.075 -0.065 -0.060 -0.050 -0.040,+0.020 -0.045,+0.030 -0.020,+0.040 -0.010,+0.050 0.040 0.045 0.048 0.049 0.050 0.055 0.060 0.065 0.065 0.070 0.070 0.070 0.075 0.075 0.075 0.075 0.080 0.080 0.080 0.085 0.085 0.085 0.085 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.090 0.095 0.095 0.095 0.095 0.095 0.095 SEE NOTES ON NEXT PAGE. T4-LDS-0245, Rev. 1 (120179) (c)2012 Microsemi Corporation Page 3 of 5 1N4614UR-1 thru 1N4627UR-1e3, 1N4099UR-1 thru 1N4135UR-1e3 NOTE 1: These may be ordered as either 1N4614UR-1 thru 1N4627UR-1 and 1N4099UR-1 thru 1N4135UR-1 or CDLL4614-1 thru CDLL4627-1 and CDLL4099-1 thru CDLL4135-1. For military types, add the JAN, JANTX, JANTXV prefix for required screening to the industry part number. NOTE 2: The JEDEC type numbers shown above have a standard tolerance of +/-5% on the nominal Zener voltage. Tighter tolerances are also available with C or D suffix for 2% or 1% tolerance respectively, e.g. 1N4105CUR-1 for 2%. V Z is measured with the diode in o thermal equilibrium (still air) at 25 C for end-cap terminations. NOTE 3: Zener impedance is derived by superimposing on I ZT a 60 Hz rms ac current at 10% of I ZT . See MicroNote 202 for Z ZT variation with I Z . Pd Rated Power Dissipation (mW) GRAPHS o TEC, End Cap Temperature ( C) or TA Ambient Temperature on FR4 PC board FIGURE 2 - Power Derating Curve Noise density, (N D ) is specified in microvolt-rms per square-root-hertz. Actual measurement is performed using a 1 KHz to 3 KHz frequency bandpass filter at a constant Zener test current (I ZT ) at 25 oC ambient temperature. N D is calculated from the formula. Typical Capacitance in Picofarads (pF) FIGURE 1 - Noise Density Measurement Circuit Zener Voltage V Z FIGURE 3 - Capacitance vs. Zener Voltage (Typical) T4-LDS-0245, Rev. 1 (120179) (c)2012 Microsemi Corporation Page 4 of 5 1N4614UR-1 thru 1N4627UR-1e3, 1N4099UR-1 thru 1N4135UR-1e3 PACKAGE DIMENSIONS DIM BD BL ECT S INCH MIN MAX 0.063 0.067 0.130 0.146 0.016 0.022 .001 min MILLIMETERS MIN MAX 1.60 1.70 3.30 3.71 0.41 0.56 0.03 min PAD LAYOUT A B C T4-LDS-0245, Rev. 1 (120179) (c)2012 Microsemi Corporation INCH .200 .055 .080 mm 5.08 1.40 2.03 Page 5 of 5