The AQ series high frequency filters provide a low cost
solution to the problem of power line noise at high
frequencies.
With UL Recognition and CSA Certification, the AQ series
is readily available to the customer who requires high
common and differential mode performance from 10KHz to
1GHz. Models with “F” suffix incorporate an IEC connector
and a fuseholder. Models with “S” suffix are supplied with
a switch.
The AQ series is ideal for applications where computers
are used to process secret or confidential information.
High Frequency Power Line Filter or Power Entry Module
Maximum leakage current, each line-to-ground
3A Models 6A Models
@ 120 VAC 60 Hz: 1.2mA .7mA
@ 250 VAC 50 Hz: 2.3mA 1.2mA
Hipot rating (one minute):
line-to-ground 2250 VDC
line-to-line 1450 VDC
Operating frequency: 50/60 Hz
Rated voltage (max.): 250 VAC
12
Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com
Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com
specified. Values in italics Specifications subject Germany: 49-89-6089-0
are metric equivalents. to change.
AQ Series
AQ Series
CORCOM Product Guide
Specifications
UL Recognized
CSA Certified
Electrical Schematics
Recommended Panel Cutouts
3A Models
6A Models
.9
10 + .005
23.
11 + .13 .855
+ .005
21.72
+ .13
.620
+ .005
15.75 + .13
.620
+ .005
15.75 + .13 Dia.
1.295 + .005
32.89 + .13
.235
+ .005
5.969 + .13 R
Minimum insertion loss in dB:
Line-to-ground in 50 ohm circuit
Current Frequency-MHz
Rating .01 .1 .5 1 10 50 100 300 1000
3A 10 80 88 88 100 100 100 93 85
6A 26 59 80 80 100 100 100 93 85
Line-to-line in 50 ohm circuit
Current Frequency-MHz
Rating .01 .1 .5 1 10 50 100 300 1000
3A 6 51 78 88 100 100 100 93 85
6A 10 65 86 95 100 100 100 93 85
Part Numbers
3VAQ3 6VAQ3
3VAQ8F 6VAQ8F
3VAQ8FS 6VAQ8FS
6VAQ8F
3VAQ8F
Resistor location for reference only.Resistor location for reference only.