S-8211C Series BATTERY PROTECTION IC FOR 1-CELL PACK www.ablic.com www.ablicinc.com Rev.7.7_03 (c) ABLIC Inc., 2004-2015 The S-8211C Series is a protection IC for 1-cell lithium-ion / lithium polymer rechargeable battery and includes highaccuracy voltage detection circuits and delay circuits. The S-8211C Series is suitable for protecting 1-cell lithium-ion / lithium polymer rechargeable battery packs from overcharge, overdischarge, and overcurrent. Features High-accuracy voltage detection circuit Overcharge detection voltage Accuracy 25 mV (Ta = 25C) Accuracy 30 mV (Ta = 5C to 55C) *1 Accuracy 50 mV Overcharge release voltage 3.8 V to 4.43 V Overdischarge detection voltage 2.0 V to 3.0 V (10 mV step) Accuracy 50 mV *2 Accuracy 100 mV Overdischarge release voltage 2.0 V to 3.4 V Discharge overcurrent detection voltage 0.05 V to 0.30 V (10 mV step) Accuracy 15 mV Load short-circuiting detection voltage 0.5 V (fixed) Accuracy 200 mV Charge overcurrent detection voltage 0.1 V (fixed) Accuracy 30 mV Detection delay times are generated only by an internal circuit (external capacitors are unnecessary). Accuracy 20% High-withstand voltage (VM pin and CO pin: Absolute maximum rating = 28 V) 0 V battery charge function "available" / "unavailable" is selectable. Power-down function "available" / "unavailable" is selectable. Wide operation temperature range Ta = 40C to 85C Low current consumption During operation 3.0 A typ., 5.5 A max. (Ta = 25C) During power-down 0.2 A max. (Ta = 25C) *3 Lead-free, Sn 100%, halogen-free 3.9 V to 4.5 V (5 mV step) P P P P P *1. Overcharge release voltage = Overcharge detection voltage Overcharge hysteresis voltage (Overcharge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.4 V in 50 mV step.) *2. Overdischarge release voltage = Overdischarge detection voltage Overdischarge hysteresis voltage (Overdischarge hysteresis voltage can be selected as 0 V or from a range of 0.1 V to 0.7 V in 100 mV step.) *3. Refer to " Product Name Structure" for details. Applications Lithium-ion rechargeable battery pack Lithium polymer rechargeable battery pack Packages SOT-23-5 SNT-6A 1 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Block Diagram Output control circuit 0 V battery charge / charge inhibition circuit DO Divider control circuit Oscillator control circuit VDD Charger detection circuit CO Overcharge detection comparator Discharge overcurrent detection comparator RVMD + VM RVMS + Charge overcurrent detection comparator Overdischarge detection comparator + Load short-circuiting detection comparator Remark All diodes shown in figure are parasitic diodes. Figure 1 2 VSS BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Product Name Structure 1. Product name 1. 1 SOT-23-5 S-8211C xx - M5T1 x Environmental code U: Lead-free (Sn 100%), halogen-free G: Lead-free (for details, please contact our sales office) Package name (abbreviation) and IC packing specifications M5T1: SOT-23-5, Tape *1 *2 Serial code Sequentially set from AA to ZZ *1. Refer to the tape drawing. *2. Refer to "3. Product name list". 1. 2 SNT-6A S-8211C xx - I6T1 U Environmental code U: Lead-free (Sn 100%), halogen-free Package name (abbreviation) and IC packing specifications I6T1: SNT-6A, Tape *1 *2 Serial code Sequentially set from AA to ZZ *1. Refer to the tape drawing. *2. Refer to "3. Product name list". 2. Packages Table 1 Package Drawing Codes Package Name SOT-23-5 SNT-6A Dimension Tape Reel Land MP005-A-P-SD PG006-A-P-SD MP005-A-C-SD PG006-A-C-SD MP005-A-R-SD PG006-A-R-SD PG006-A-L-SD 3 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 3. Product name list 3. 1 SOT-23-5 Table 2 Product Name Overcharge Detection Voltage [VCU] Overcharge Release Voltage [VCL] Overdischarge Detection Voltage [VDL] Overdischarge Release Voltage [VDU] Discharge Overcurrent Detection Voltage [VDIOV] S-8211CAA-M5T1x 4.275 V 4.175 V 2.30 V 2.40 V S-8211CAB-M5T1x 4.325 V 4.075 V 2.50 V 2.90 V S-8211CAD-M5T1x 4.350 V 4.150 V 2.30 V 3.00 V S-8211CAE-M5T1x 4.280 V 4.180 V 2.30 V 2.30 V S-8211CAF-M5T1x 4.275 V 4.275 V 2.30 V 2.30 V S-8211CAH-M5T1x 4.280 V 4.080 V 2.30 V 2.30 V S-8211CAI-M5T1x 4.280 V 4.080 V 2.30 V 2.30 V S-8211CAJ-M5T1x 4.280 V 4.080 V 2.30 V 2.30 V S-8211CAK-M5T1x 4.280 V 4.080 V 2.30 V 2.30 V S-8211CAL-M5T1x 4.280 V 4.130 V 2.60 V 3.10 V S-8211CAM-M5T1x 4.280 V 4.130 V 2.80 V 3.10 V S-8211CAN-M5T1x 4.200 V 4.100 V 2.80 V 2.90 V S-8211CAO-M5T1x 4.275 V 4.075 V 2.30 V 2.30 V S-8211CAP-M5T1x 4.275 V 4.075 V 2.30 V 2.30 V S-8211CAQ-M5T1x 4.275 V 4.075 V 2.30 V 2.30 V S-8211CAR-M5T1x 4.275 V 4.075 V 2.30 V 2.30 V S-8211CAS-M5T1x 4.280 V 4.130 V 2.80 V 3.10 V S-8211CAT-M5T1x 4.275 V 4.075 V 2.80 V 3.10 V S-8211CAU-M5T1x 4.280 V 4.130 V 2.80 V 3.10 V S-8211CAV-M5T1x 4.325 V 4.075 V 2.50 V 2.90 V S-8211CAY-M5T1x 4.280 V 4.280 V 2.80 V 2.80 V S-8211CAZ-M5T1x 4.280 V 4.280 V 3.00 V 3.00 V S-8211CBV-M5T1x 4.280 V 4.080 V 2.80 V 2.80 V S-8211CCD-M5T1U 4.280 V 4.130 V 2.70 V 3.10 V *2 S-8211CCJ-M5T1U 4.225 V 4.025 V 2.50 V 2.90 V S-8211CCK-M5T1U 4.350 V 4.150 V 2.10 V 2.20 V S-8211CCQ-M5T1U 4.350 V 4.150 V 2.10 V 2.20 V S-8211CCR-M5T1U 4.350 V 4.150 V 2.10 V 2.20 V S-8211CCT-M5T1U 4.150 V 4.050 V 2.50 V 2.80 V S-8211CCV-M5T1U 4.220 V 4.120 V 2.50 V 2.80 V S-8211CCW-M5T1U 4.280 V 4.130 V 2.30 V 3.00 V S-8211CDB-M5T1U 4.100 V 3.850 V 2.50 V 2.90 V S-8211CDD-M5T1U 4.350 V 4.150 V 2.10 V 2.20 V S-8211CDG-M5T1U 4.275 V 4.075 V 2.50 V 3.00 V S-8211CDJ-M5T1U 4.150 V 4.050 V 2.90 V 3.00 V S-8211CDN-M5T1U 4.350 V 4.150 V 2.80 V 3.10 V *1. Refer to Table 4 about the details of the delay time combinations. *2. The charge overcurrent detection voltage: 0.15 V 0.03 V (Ta = 25C) 0 V Battery Charge Function Delay Time Power-down Combination*1 Function P 0.10 V 0.15 V 0.20 V 0.12 V 0.10 V 0.08 V 0.10 V 0.10 V 0.13 V 0.15 V 0.15 V 0.15 V 0.12 V 0.13 V 0.15 V 0.15 V 0.10 V 0.10 V Available Unavailable Available Available Available Available Available Unavailable Unavailable Unavailable Unavailable Unavailable Available Available Available Available Unavailable Available (1) (2) (3) (4) (5) (1) (1) (1) (1) (1) (1) (1) (5) (5) (5) (1) (1) (4) 0.05 V 0.15 V 0.05 V 0.075 V 0.15 V 0.20 V 0.15 V 0.30 V 0.12 V 0.15 V 0.16 V 0.16 V 0.20 V 0.15 V 0.12 V 0.16 V 0.15 V 0.05 V Unavailable Available Available Available Available Available Available (1) (2) (1) (1) (4) (1) (8) (1) (1) (1) (1) (1) (3) (1) (6) (1) (1) (1) Unavailable Unavailable Unavailable Available Available Available Unavailable Unavailable Available Unavailable Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Unavailable Available Available Available Available Unavailable Available Available Available Available Available Available Remark 1. Please contact our sales office for the products with detection voltage value other than those specified above. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. 4 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 3. 2 SNT-6A Table 3 (1 / 2) Product Name S-8211CAA-I6T1U S-8211CAB-I6T1U S-8211CAD-I6T1U S-8211CAE-I6T1U S-8211CAF-I6T1U S-8211CAH-I6T1U S-8211CAI-I6T1U S-8211CAJ-I6T1U S-8211CAK-I6T1U S-8211CAL-I6T1U S-8211CAM-I6T1U S-8211CAN-I6T1U S-8211CAO-I6T1U S-8211CAP-I6T1U S-8211CAQ-I6T1U S-8211CAR-I6T1U S-8211CAS-I6T1U S-8211CAT-I6T1U S-8211CAU-I6T1U S-8211CAV-I6T1U S-8211CAW-I6T1U S-8211CAX-I6T1U S-8211CAY-I6T1U S-8211CAZ-I6T1U S-8211CBA-I6T1U S-8211CBB-I6T1U S-8211CBD-I6T1U S-8211CBF-I6T1U S-8211CBH-I6T1U S-8211CBJ-I6T1U S-8211CBN-I6T1U S-8211CBO-I6T1U S-8211CBR-I6T1U S-8211CBV-I6T1U S-8211CBW-I6T1U S-8211CBZ-I6T1U S-8211CCB-I6T1U S-8211CCC-I6T1U S-8211CCD-I6T1U S-8211CCE-I6T1U*2 S-8211CCF-I6T1U S-8211CCG-I6T1U Overcharge Detection Voltage [VCU] Overcharge Release Voltage [VCL] Overdischarge Detection Voltage [VDL] Overdischarge Release Voltage [VDU] Discharge Overcurrent Detection Voltage [VDIOV] 4.275 V 4.325 V 4.350 V 4.280 V 4.275 V 4.280 V 4.280 V 4.280 V 4.280 V 4.280 V 4.280 V 4.200 V 4.275 V 4.175 V 4.075 V 4.150 V 4.180 V 4.275 V 4.080 V 4.080 V 4.080 V 4.080 V 4.130 V 4.130 V 4.100 V 4.075 V 2.30 V 2.50 V 2.30 V 2.30 V 2.30 V 2.30 V 2.30 V 2.30 V 2.30 V 2.60 V 2.80 V 2.80 V 2.30 V 2.40 V 2.90 V 3.00 V 2.30 V 2.30 V 2.30 V 2.30 V 2.30 V 2.30 V 3.10 V 3.10 V 2.90 V 2.30 V 0.10 V 0.15 V 0.20 V 0.12 V 0.10 V 0.08 V 0.10 V 0.10 V 0.13 V 0.15 V 0.15 V 0.15 V 0.12 V 4.275 V 4.275 V 4.275 V 4.280 V 4.275 V 4.075 V 4.075 V 4.075 V 4.130 V 4.075 V 2.30 V 2.30 V 2.30 V 2.80 V 2.80 V 2.30 V 2.30 V 2.30 V 3.10 V 3.10 V 0.13 V 0.15 V 0.15 V 0.10 V 0.10 V 4.280 V 4.325 V 4.280 V 4.275 V 4.280 V 4.280 V 4.275 V 4.300 V 4.275 V 4.300 V 4.275 V 4.275 V 4.225 V 4.270 V 4.280 V 4.280 V 4.280 V 4.375 V 4.250 V 4.270 V 4.280 V 4.225 V 4.350 V 4.275 V 4.130 V 4.075 V 4.080 V 4.175 V 4.280 V 4.280 V 4.175 V 4.100 V 4.275 V 4.100 V 4.175 V 4.075 V 4.125 V 4.070 V 4.180 V 4.080 V 4.180 V 4.125 V 4.050 V 4.070 V 4.130 V 4.025 V 4.050 V 4.075 V 2.80 V 2.50 V 2.40 V 2.30 V 2.80 V 3.00 V 2.30 V 2.30 V 2.30 V 2.10 V 2.80 V 2.80 V 2.00 V 2.30 V 2.30 V 2.80 V 2.50 V 2.50 V 3.00 V 3.00 V 2.70 V 2.80 V 2.30 V 2.50 V 3.10 V 2.90 V 2.40 V 2.30 V 2.80 V 3.00 V 2.40 V 2.30 V 2.30 V 2.10 V 2.90 V 2.90 V 2.00 V 2.30 V 2.30 V 2.80 V 2.70 V 2.90 V 3.20 V 3.00 V 3.10 V 2.80 V 2.30 V 2.70 V 0.05 V 0.15 V 0.05 V 0.12 V 0.05 V 0.075 V 0.05 V 0.13 V 0.05 V 0.13 V 0.08 V 0.10 V 0.20 V 0.10 V 0.12 V 0.15 V 0.19 V 0.12 V 0.10 V 0.10 V 0.20 V 0.15 V 0.13 V 0.16 V 0 V Battery Charge Function Delay Time Power-down Combination*1 Function P Available (1) Unavailable Available Available Available Available Available Unavailable Unavailable Unavailable Unavailable Unavailable Available Available Available Available Unavailable Available Unavailable Available Unavailable Available Available Available Available Available Available Available Available Available (2) (3) (4) (5) (1) (1) (1) (1) (1) (1) (1) (5) (5) (5) (1) Unavailable Available Unavailable Available Unavailable Unavailable Available Available Available Available Available Unavailable (1) (4) (1) (2) (6) (4) (1) (1) (1) (1) (5) (1) (1) (5) (7) (5) (4) (4) (1) (4) (1) (5) (1) (8) (5) (1) Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Unavailable Available Available 5 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Table 3 (2 / 2) Product Name Over-charge Detection Voltage [VCU] Overcharge Release Voltage [VCL] Overdischarge Detection Voltage [VDL] Overdischarge Release Voltage [VDU] S-8211CCH-I6T1U*2 4.275 V 4.075 V 2.80 V 2.80 V S-8211CCI-I6T1U 4.275 V 4.075 V 2.60 V 2.60 V S-8211CCJ-I6T1U*2 4.225 V 4.025 V 2.50 V 2.90 V S-8211CCM-I6T1U 4.275 V 4.075 V 2.80 V 3.10 V S-8211CCN-I6T1U*2 4.280 V 4.180 V 2.50 V 2.70 V S-8211CCS-I6T1U 4.425 V 4.225 V 2.30 V 2.30 V S-8211CCU-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V S-8211CCW-I6T1U 4.280 V 4.130 V 2.30 V 3.00 V S-8211CCX-I6T1U 4.425 V 4.225 V 2.30 V 2.30 V S-8211CCY-I6T1U 4.280 V 4.180 V 2.80 V 2.80 V S-8211CCZ-I6T1U 4.280 V 4.180 V 2.50 V 2.50 V S-8211CDA-I6T1U 4.280 V 4.130 V 2.60 V 3.10 V S-8211CDC-I6T1U 4.280 V 4.130 V 3.00 V 3.10 V S-8211CDE-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V S-8211CDF-I6T1U 4.425 V 4.225 V 2.80 V 2.80 V S-8211CDH-I6T1U 4.275 V 4.075 V 2.60 V 2.60 V S-8211CDI-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V S-8211CDK-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V S-8211CDL-I6T1U 4.425 V 4.225 V 2.50 V 2.90 V S-8211CDM-I6T1U 4.425 V 4.225 V 2.50 V 3.10 V S-8211CDO-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V S-8211CDP-I6T1U 4.425 V 4.225 V 2.50 V 2.50 V *1. Refer to Table 4 about the details of the delay time combinations. *2. The charge overcurrent detection voltage: 0.15 V 0.03 V (Ta = 25C) Discharge Overcurrent Detection Voltage [VDIOV] 0.15 V 0.15 V 0.15 V 0.20 V 0.17 V 0.165 V 0.13 V 0.20 V 0.07 V 0.12 V 0.12 V 0.10 V 0.15 V 0.10 V 0.12 V 0.10 V 0.15 V 0.15 V 0.13 V 0.10 V 0.10 V 0.13 V 0 V Battery Delay Time Power-down Charge Combination*1 Function Function P Unavailable Available Available Available Unavailable Unavailable Available Available Available Unavailable Unavailable Unavailable Unavailable Available Available Available Available Unavailable Available Unavailable Unavailable Available (8) (5) (8) (4) (1) (5) (5) (3) (5) (4) (4) (1) (1) (5) (5) (5) (5) (5) (5) (1) (1) (9) Available Available Unavailable Available Available Available Available Available Available Available Available Available Available Available Available Available Available Available Unavailable Available Available Available Remark Please contact our sales office for the products with detection voltage value other than those specified above. 6 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Table 4 Delay Time Combination Overcharge Detection Delay Time [tCU] Overdischarge Detection Delay Time [tDL] Discharge Overcurrent Detection Delay Time [tDIOV] Load Short-circuiting Detection Delay Time [tSHORT] Charge Overcurrent Detection Delay Time [tCIOV] (1) (2) (3) (4) (5) (6) (7) (8) (9) 1.2 s 1.2 s 143 ms 1.2 s 1.2 s 1.2 s 573 ms 1.2 s 1.2 s 150 ms 150 ms 38 ms 150 ms 38 ms 150 ms 150 ms 75 ms 300 ms 9 ms 9 ms 18 ms 18 ms 9 ms 4.5 ms 4.5 ms 9 ms 9 ms 300 s 560 s 300 s 300 s 300 s 300 s 300 s 300 s 300 s 9 ms 9 ms 9 ms 9 ms 9 ms 9 ms 4.5 ms 9 ms 9 ms Remark The delay times can be changed within the range listed in Table 5. For details, please contact our sales office. Table 5 Delay Time Overcharge detection delay time Overdischarge detection delay time Discharge overcurrent detection delay time Load short-circuiting detection delay time Charge overcurrent detection delay time Symbol tCU tDL tDIOV tSHORT tCIOV Selection Range 38 ms 143 ms 75 ms 4.5 ms 4.5 ms 573 ms 150 ms*1 9 ms*1 300 s*1 9 ms*1 P P P P Remark 1.2 s*1 300 ms Select a value from the left. Select a value from the left. 18 ms 560 s Select a value from the left. Select a value from the left. 18 ms Select a value from the left. P *1. The value is the delay time of the standard products. 7 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Pin Configurations 1. SOT-23-5 Table 6 Top view 5 4 Pin No. 1 2 3 Figure 2 Symbol 1 VM 2 3 VDD VSS 4 DO 5 CO Description Voltage detection pin between VM pin and VSS pin (Overcurrent / charger detection pin) Input pin for positive power supply Input pin for negative power supply Connection pin of discharge control FET gate (CMOS output) Connection pin of charge control FET gate (CMOS output) 2. SNT-6A Top view 1 2 3 6 5 4 Figure 3 Table 7 Pin No. 1 Symbol NC*1 P 2 CO 3 DO 4 5 VSS VDD 6 VM *1. The NC pin is electrically open. The NC pin can be connected to VDD pin or VSS pin. 8 Description No connection Connection pin of charge control FET gate (CMOS output) Connection pin of discharge control FET gate (CMOS output) Input pin for negative power supply Input pin for positive power supply Voltage detection pin between VM pin and VSS pin (Overcurrent / charger detection pin) BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Absolute Maximum Ratings Table 8 (Ta = 25C unless otherwise specified) Item Symbol Input voltage between VDD pin and VSS pin VM pin input voltage Applied pin Absolute Maximum Rating Unit VDS VDD VSS 0.3 to VSS 12 V VVM VM VDD 28 to VDD 0.3 V DO pin output voltage VDO DO VSS 0.3 to VDD 0.3 V CO pin output voltage VCO CO VVM 0.3 to VDD 0.3 250 (When not mounted on board) 600*1 400*1 40 to 85 V mW mW mW C 55 to 125 C SNT-6A Operation ambient temperature Topr Storage temperature Tstg Power dissipation SOT-23-5 PD P P *1. When mounted on board [Mounted board] (1) Board size: 114.3 mm 76.2 mm t1.6 mm (2) Board name: JEDEC STANDARD51-7 The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. 700 Power Dissipation (P D) [mW] Caution 600 SOT-23-5 500 SNT-6A 400 300 200 100 0 0 100 150 50 Ambient Temperature (Ta) [C] Figure 4 Power Dissipation of Package (When Mounted on Board) 9 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Electrical Characteristics 1. Except detection delay time (Ta = 25C) Table 9 Item Symbol Condition Min. (Ta = 25C unless otherwise specified) Test Test Typ. Max. Unit Condition Circuit Detection Voltage 0.50 0.1 VCU 0.025 VCU 0.03 VCL 0.05 VCL 0.025 VDL 0.05 VDU 0.10 VDU 0.05 VDIOV 0.015 0.70 0.07 1.2 VCU 0.025 VCU 0.03 VCL 0.05 VCL 0.025 VDL 0.05 VDU 0.10 VDU 0.05 VDIOV 0.015 0.30 0.13 V 1 1 V 1 1 V 1 1 V 1 1 V 2 2 V 2 2 V 2 2 V 3 2 V V 3 4 2 2 V 11 2 0.5 V 12 2 100 10 300 20 900 40 k k 6 6 3 3 1.5 8 V 1.5 28 V VDD = 3.5 V, VVM = 0 V VDD = VVM = 1.5 V 1.0 3.0 5.5 0.2 A A 5 2 5 2 Input Current (Without Power-down Function) IOPE VDD = 3.5 V, VVM = 0 V Current consumption during operation 1.0 3.90 V to 4.50 V, adjustable VCU Overcharge detection voltage 3.90 V to 4.50 V, adjustable, *1 Ta = 5C to 55C P VCL Overcharge release voltage VCL VCU 3.80 V to 4.43 V, adjustable VCL = VCU Overdischarge detection voltage VDL 2.00 V to 3.00 V, adjustable Overdischarge release voltage VDU 2.00 V to 3.40 V, adjustable Discharge overcurrent detection voltage VDIOV Load short-circuiting detection voltage*2 Charge overcurrent detection voltage 0 V Battery Charge Function VSHORT VCIOV 0 V battery charge starting charger voltage V0CHA 0 V battery charge inhibition battery voltage V0INH P Internal Resistance RVMD Resistance between VM pin and VDD pin RVMS Resistance between VM pin and VSS pin Input Voltage Operation voltage between VDD pin VDSOP1 and VSS pin Operation voltage between VDD pin VDSOP2 and VM pin Input Current (With Power-down Function) IOPE Current consumption during operation IPDN Current consumption during power-down Current consumption during overdischarge Output Resistance CO pin resistance "H" CO pin resistance "L" DO pin resistance "H" DO pin resistance "L" VDU VDL VDU = VDL 0.05 V to 0.30 V, adjustable 0 V battery charge function "available" 0 V battery charge function "unavailable" VDD = 1.8 V, VVM = 0 V VDD = 3.5 V, VVM = 1.0 V VCU VCU VCL VCL VDL VDU VDU VDIOV 2 0.3 5.5 3.5 5 VDD = VVM = 1.5 V 3.0 2.0 A IOPED A 5 2 RCOH RCOL RDOH RDOL VCO = 3.0 V, VDD = 3.5 V, VVM = 0 V VCO = 0.5 V, VDD = 4.5 V, VVM = 0 V VDO = 3.0 V, VDD = 3.5 V, VVM = 0 V VDO = 0.5 V, VDD = VVM = 1.8 V 2.5 2.5 2.5 2.5 5 5 5 5 10 10 10 10 k k k k 7 7 8 8 4 4 4 4 *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. *2. In any conditions, load short-circuiting detection voltage (VSHORT) is higher than discharge overcurrent detection voltage (VDIOV). 10 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 2. Except detection delay time (Ta = 40C to 85C*1) P P Table 10 (Ta = 40C to 85C*1 unless otherwise specified) Test Test Min. Typ. Max. Unit Condition Circuit P Item Symbol Condition P Detection Voltage Overcharge detection voltage Overcharge release voltage Overdischarge detection voltage Overdischarge release voltage VCU 3.90 V to 4.50 V, adjustable VCL 3.80 V to 4.43 V, adjustable VCL VCU VCL = VCU VDL 2.00 V to 3.00 V, adjustable VDU 2.00 V to 3.40 V, adjustable Discharge overcurrent detection voltage VDIOV Load short-circuiting detection voltage*2 Charge overcurrent detection voltage 0 V Battery Charge Function VSHORT VCIOV 0 V battery charge starting charger voltage V0CHA 0 V battery charge inhibition battery voltage V0INH VDU VDL VDU = VDL 0.05 V to 0.30 V, adjustable VCU 0.060 VCL 0.08 VCL 0.06 VDL 0.11 VDU 0.15 VDU 0.11 VDIOV 0.021 VCU VCL VCL VDL VDU VDU VDIOV VCU 0.040 VCL 0.065 VCL 0.04 VDL 0.13 VDU 0.19 VDU 0.13 VDIOV 0.024 V 1 1 V 1 1 V 1 1 V 2 2 V 2 2 V 2 2 V 3 2 0.16 0.14 0.50 0.1 0.84 0.06 V V 3 4 2 2 1.7 V 11 2 0.3 V 12 2 78 7.2 300 20 1310 44 k k 6 6 3 3 1.5 8 V 1.5 28 V VDD = 3.5 V, VVM = 0 V VDD = VVM = 1.5 V 0.7 3.0 6.0 0.3 A A 5 5 2 2 Input Current (Without Power-down Function) IOPE VDD = 3.5 V, VVM = 0 V Current consumption during operation IOPED VDD = VVM = 1.5 V Current consumption during overdischarge 0.7 3.0 6.0 A 5 2 0.2 2.0 3.8 A 5 2 1.2 1.2 1.2 1.2 5 5 5 5 15 15 15 15 k k k k 7 7 8 8 4 4 4 4 P Internal Resistance RVMD Resistance between VM pin and VDD pin RVMS Resistance between VM pin and VSS pin Input Voltage Operation voltage between VDD pin VDSOP1 and VSS pin Operation voltage between VDD pin VDSOP2 and VM pin Input Current (With Power-down Function) IOPE Current consumption during operation IPDN Current consumption during power-down Output Resistance CO pin resistance "H" CO pin resistance "L" DO pin resistance "H" DO pin resistance "L" RCOH RCOL RDOH RDOL 0 V battery charge function "available" 0 V battery charge function "unavailable" VDD = 1.8 V, VVM = 0 V VDD = 3.5 V, VVM = 1.0 V VCO = 3.0 V, VDD = 3.5 V, VVM = 0 V VCO = 0.5 V, VDD = 4.5 V, VVM = 0 V VDO = 3.0 V, VDD = 3.5 V, VVM = 0 V VDO = 0.5 V, VDD = VVM = 1.8 V *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. *2. In any conditions, load short-circuiting detection voltage (VSHORT) is higher than discharge overcurrent detection voltage (VDIOV). 11 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 3. Detection delay time 3. 1 S-8211CAA, S-8211CAH, S-8211CAI, S-8211CAJ, S-8211CAK, S-8211CAL, S-8211CAM, S-8211CAN, S-8211CAR, S-8211CAS, S-8211CAU, S-8211CAY, S-8211CAZ, S-8211CBA, S-8211CBB, S-8211CBF, S-8211CBH, S-8211CBW, S-8211CCB, S-8211CCD, S-8211CCG, S-8211CCK, S-8211CCN, S-8211CCQ, S-8211CCR, S-8211CCT, S-8211CCV, S-8211CDA, S-8211CDB, S-8211CDC, S-8211CDG, S-8211CDJ, S-8211CDM, S-8211CDN, S-8211CDO Table 11 Item Symbol Condition Min. Typ. Max. Unit Test Condition Test Circuit Delay Time (Ta = 25C) Overcharge detection delay time tCU 0.96 1.2 1.4 s 9 5 Overdischarge detection delay time tDL 120 150 180 ms 9 5 Discharge overcurrent detection delay time tDIOV 7.2 9 11 ms 10 5 Load short-circuiting detection delay time tSHORT 240 300 360 s 10 5 Charge overcurrent detection delay time tCIOV 7.2 9 11 ms 10 5 Overcharge detection delay time tCU 0.7 1.2 2.0 s 9 5 Overdischarge detection delay time tDL 83 150 255 ms 9 5 Discharge overcurrent detection delay time tDIOV 5 15 540 10 tSHORT 9 300 ms Load short-circuiting detection delay time 5 150 s 10 5 Charge overcurrent detection delay time tCIOV 5 9 15 ms 10 5 Delay Time (Ta = 40C to 85C)*1 P *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 3. 2 S-8211CAB, S-8211CAV Table 12 Item Symbol Condition Min. Typ. Max. Unit Test Condition Test Circuit 9 5 Delay Time (Ta = 25C) Overcharge detection delay time tCU 0.96 1.2 1.4 s Overdischarge detection delay time tDL 120 150 180 ms 9 5 Discharge overcurrent detection delay time tDIOV 7.2 9 11 ms 10 5 Load short-circuiting detection delay time tSHORT 450 560 670 s 10 5 Charge overcurrent detection delay time tCIOV 7.2 9 11 ms 10 5 tCU 0.7 1.2 2.0 s 9 5 Overdischarge detection delay time tDL 83 150 255 ms 9 5 Discharge overcurrent detection delay time Load short-circuiting detection delay time tDIOV tSHORT 5 260 9 560 15 940 ms s 10 10 5 5 Charge overcurrent detection delay time tCIOV 5 9 15 ms 10 5 Delay Time (Ta = 40C to 85C)*1 P Overcharge detection delay time *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 12 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 3. 3 S-8211CAD, S-8211CCW Table 13 Item Symbol Delay Time (Ta = 25C) Overcharge detection delay time Overdischarge detection delay time Discharge overcurrent detection delay time Load short-circuiting detection delay time Charge overcurrent detection delay time Delay Time (Ta = 40C to 85C)*1 Overcharge detection delay time Overdischarge detection delay time Discharge overcurrent detection delay time Load short-circuiting detection delay time Charge overcurrent detection delay time Test Test Condition Circuit Condition Min. Typ. Max. Unit tCU tDL tDIOV tSHORT tCIOV 115 30 14.5 240 7.2 143 38 18 300 9 172 46 22 360 11 ms ms ms s ms 9 9 10 10 10 5 5 5 5 5 tCU tDL tDIOV tSHORT tCIOV 82 20 10 150 5 143 38 18 300 9 240 65 30 540 15 ms ms ms s ms 9 9 10 10 10 5 5 5 5 5 P *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 3. 4 S-8211CAE, S-8211CAT, S-8211CAX, S-8211CBR, S-8211CBV, S-8211CBZ, S-8211CCM, S-8211CCY, S-8211CCZ Table 14 Item Symbol Condition Min. Typ. Max. Unit Test Test Condition Circuit Delay Time (Ta = 25C) Overcharge detection delay time tCU 0.96 1.2 1.4 s 9 5 Overdischarge detection delay time tDL 120 150 180 ms 9 5 Discharge overcurrent detection delay time tDIOV 14.5 18 22 ms 10 5 Load short-circuiting detection delay time tSHORT 240 300 360 s 10 5 Charge overcurrent detection delay time tCIOV 7.2 9 11 ms 10 5 Overcharge detection delay time tCU 0.7 1.2 2.0 s 9 5 Overdischarge detection delay time tDL 83 150 255 ms 9 5 Discharge overcurrent detection delay time tDIOV 30 540 5 18 300 10 tSHORT 10 150 ms Load short-circuiting detection delay time s 10 5 Charge overcurrent detection delay time tCIOV 5 9 15 ms 10 5 Delay Time (Ta = 40C to 85C)*1 P *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 13 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series 3. 5 Rev.7.7_03 S-8211CAF, S-8211CAO, S-8211CAP, S-8211CAQ, S-8211CBD, S-8211CBJ, S-8211CBO, S-8211CCC, S-8211CCF, S-8211CCI, S-8211CCS, S-8211CCU, S-8211CCX, S-8211CDE, S-8211CDF, S-8211CDH, S-8211CDI, S-8211CDK, S-8211CDL Table 15 Item Symbol Condition Min. Typ. Max. Unit 0.96 1.2 1.4 s Test Test Condition Circuit Delay Time (Ta = 25C) Overcharge detection delay time tCU Overdischarge detection delay time tDL 30 38 46 Discharge overcurrent detection delay time tDIOV 7.2 9 11 Load short-circuiting detection delay time tSHORT 240 300 360 s 10 5 Charge overcurrent detection delay time tCIOV 7.2 9 11 ms 10 5 Overcharge detection delay time tCU 0.7 1.2 2.0 s 9 5 Overdischarge detection delay time tDL 20 38 65 ms 9 5 Discharge overcurrent detection delay time tDIOV 15 540 5 9 300 10 tSHORT 5 150 ms Load short-circuiting detection delay time s 10 5 Charge overcurrent detection delay time tCIOV 5 9 15 ms 10 5 9 5 ms 9 5 ms 10 5 Delay Time (Ta = 40C to 85C)*1 P *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 3. 6 S-8211CAW, S-8211CDD Table 16 Item Symbol Condition Min. Typ. Max. Unit Test Test Condition Circuit Delay Time (Ta = 25C) Overcharge detection delay time tCU 0.96 1.2 1.4 s 9 5 Overdischarge detection delay time tDL 120 150 180 ms 9 5 Discharge overcurrent detection delay time tDIOV 3.6 4.5 5.4 ms 10 5 Load short-circuiting detection delay time tSHORT 240 300 360 s 10 5 Charge overcurrent detection delay time tCIOV 7.2 9 11 ms 10 5 Overcharge detection delay time tCU 0.7 1.2 2.0 s 9 5 Overdischarge detection delay time tDL 83 150 255 ms 9 5 Discharge overcurrent detection delay time tDIOV 7.7 540 5 4.5 300 10 tSHORT 2.5 150 ms Load short-circuiting detection delay time s 10 5 Charge overcurrent detection delay time tCIOV 5 9 15 ms 10 5 Delay Time (Ta = 40C to 85C)*1 P *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 14 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 3. 7 S-8211CBN Table 17 Item Symbol Condition Min. Typ. Max. Unit Test Test Condition Circuit Delay Time (Ta = 25C) Overcharge detection delay time tCU 458 573 687 ms Overdischarge detection delay time tDL 120 150 180 Discharge overcurrent detection delay time tDIOV 3.6 4.5 5.4 Load short-circuiting detection delay time tSHORT 240 300 Charge overcurrent detection delay time tCIOV 3.6 4.5 Overcharge detection delay time tCU 334 573 955 ms 9 5 Overdischarge detection delay time tDL 83 150 255 ms 9 5 Discharge overcurrent detection delay time tDIOV 7.7 540 5 4.5 300 10 tSHORT 2.5 150 ms Load short-circuiting detection delay time s 10 5 Charge overcurrent detection delay time tCIOV 2.5 4.5 7.7 ms 10 5 9 5 ms 9 5 ms 10 5 360 s 10 5 5.4 ms 10 5 Delay Time (Ta = 40C to 85C) *1 P *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 3. 8 S-8211CCE, S-8211CCH, S-8211CCJ Table 18 Item Symbol Condition Min. Typ. Max. Unit 0.96 1.2 1.4 s Test Test Condition Circuit Delay Time (Ta = 25C) Overcharge detection delay time tCU Overdischarge detection delay time tDL 61 75 90 Discharge overcurrent detection delay time tDIOV 7.2 9 11 Load short-circuiting detection delay time tSHORT 240 300 360 s 10 5 Charge overcurrent detection delay time tCIOV 7.2 9 11 ms 10 5 Overcharge detection delay time tCU 0.7 1.2 2.0 s 9 5 Overdischarge detection delay time tDL 41 75 128 ms 9 5 Discharge overcurrent detection delay time tDIOV 15 540 5 Load short-circuiting detection delay time 9 300 10 5 150 ms tSHORT s 10 5 Charge overcurrent detection delay time tCIOV 5 9 15 ms 10 5 9 5 ms 9 5 ms 10 5 Delay Time (Ta = 40C to 85C)*1 P *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 15 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series 3. 9 Rev.7.7_03 S-8211CDP Table 19 Item Symbol Condition Min. Typ. Max. Unit Test Test Condition Circuit Delay Time (Ta = 25C) Overcharge detection delay time tCU 0.96 1.2 1.4 s 9 5 Overdischarge detection delay time tDL 240 300 360 ms 9 5 Discharge overcurrent detection delay time tDIOV 7.2 9 11 ms 10 5 Load short-circuiting detection delay time tSHORT 240 300 360 s 10 5 Charge overcurrent detection delay time tCIOV 7.2 9 11 ms 10 5 Overcharge detection delay time tCU 0.7 1.2 2.0 s 9 5 Overdischarge detection delay time tDL 166 300 510 ms 9 5 Discharge overcurrent detection delay time tDIOV 5 15 540 10 tSHORT 9 300 ms Load short-circuiting detection delay time 5 150 s 10 5 Charge overcurrent detection delay time tCIOV 5 9 15 ms 10 5 Delay Time (Ta = 40C to 85C)*1 P *1. Since products are not screened at high and low temperature, the specification for this temperature range is guaranteed by design, not tested in production. 16 Rev.7.7_03 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Test Circuits Caution Unless otherwise specified, the output voltage levels "H" and "L" at CO pin (VCO) and DO pin (VDO) are judged by the threshold voltage (1.0 V) of the N-channel FET. Judge the CO pin level with respect to VVM and the DO pin level with respect to VSS. 1. Overcharge detection voltage, overcharge release voltage (Test condition 1, test circuit 1) Overcharge detection voltage (VCU) is defined as the voltage between the VDD pin and VSS pin at which VCO goes from "H" to "L" when the voltage V1 is gradually increased from the starting condition of V1 = 3.5 V. Overcharge release voltage (VCL) is defined as the voltage between the VDD pin and VSS pin at which VCO goes from "L" to "H" when the voltage V1 is then gradually decreased. Overcharge hysteresis voltage (VHC) is defined as the difference between overcharge detection voltage (VCU) and overcharge release voltage (VCL). 2. Overdischarge detection voltage, overdischarge release voltage (Test condition 2, test circuit 2) Overdischarge detection voltage (VDL) is defined as the voltage between the VDD pin and VSS pin at which VDO goes from "H" to "L" when the voltage V1 is gradually decreased from the starting condition of V1 = 3.5 V, V2 = 0 V. Overdischarge release voltage (VDU) is defined as the voltage between the VDD pin and VSS pin at which VDO goes from "L" to "H" when the voltage V1 is then gradually increased. Overdischarge hysteresis voltage (VHD) is defined as the difference between overdischarge release voltage (VDU) and overdischarge detection voltage (VDL). 3. Discharge overcurrent detection voltage (Test condition 3, test circuit 2) Discharge overcurrent detection voltage (VDIOV) is defined as the voltage between the VM pin and VSS pin whose delay time for changing VDO from "H" to "L" lies between the minimum and the maximum value of discharge overcurrent delay time when the voltage V2 is increased rapidly (within 10 s) from the starting condition of V1 = 3.5 V, V2 = 0 V. 4. Load short-circuiting detection voltage (Test condition 3, test circuit 2) Load short-circuiting detection voltage (VSHORT) is defined as the voltage between the VM pin and VSS pin whose delay time for changing VDO from "H" to "L" lies between the minimum and the maximum value of load short-circuiting delay time when the voltage V2 is increased rapidly (within 10 s) from the starting condition of V1 = 3.5 V, V2 = 0 V. 5. Charge overcurrent detection voltage (Test condition 4, test circuit 2) Charge overcurrent detection voltage (VCIOV) is defined as the voltage between the VM pin and VSS pin whose delay time for changing VCO from "H" to "L" lies between the minimum and the maximum value of charge overcurrent delay time when the voltage V2 is decreased rapidly (within 10 s) from the starting condition of V1 = 3.5 V, V2 = 0 V. 6. Current consumption during operation (Test condition 5, test circuit 2) The current consumption during operation (IOPE) is the current that flows through the VDD pin (IDD) under the set conditions of V1 = 3.5 V and V2 = 0 V (normal status). 17 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 7. Current consumption during power-down, current consumption during overdischarge (Test condition 5, test circuit 2) 7. 1 With power-down function The current consumption during power-down (IPDN) is the current that flows through the VDD pin (IDD) under the set condition of V1 = V2 = 1.5 V (overdischarge status). 7. 2 Without power-down function The current consumption during overdischarge (IOPED) is the current that flows through the VDD pin (IDD) under the set condition of V1 = V2 = 1.5 V (overdischarge status). 8. Resistance between VM pin and VDD pin (Test condition 6, test circuit 3) The resistance between VM pin and VDD pin (RVMD) is the resistance between VM pin and VDD pin under the set conditions of V1 = 1.8 V, V2 = 0 V. 9. Resistance between VM pin and VSS pin (Test condition 6, test circuit 3) The resistance between VM pin and VSS pin (RVMS) is the resistance between VM pin and VSS pin under the set conditions of V1 = 3.5 V, V2 = 1.0 V. 10. CO pin resistance "H" (Test condition 7, test circuit 4) The CO pin resistance "H" (RCOH) is the resistance at the CO pin under the set conditions of V1 = 3.5 V, V2 = 0 V, V3 = 3.0 V. 11. CO pin resistance "L" (Test condition 7, test circuit 4) The CO pin resistance "L" (RCOL) is the resistance at the CO pin under the set conditions of V1 = 4.5 V, V2 = 0 V, V3 = 0.5 V. 12. DO pin resistance "H" (Test condition 8, test circuit 4) The DO pin resistance "H" (RDOH) is the resistance at the DO pin under the set conditions of V1 = 3.5 V, V2 = 0 V, V4 = 3.0 V. 13. DO pin resistance "L" (Test condition 8, test circuit 4) The DO pin resistance "L" (RDOL) is the resistance at the DO pin under the set conditions of V1 = 1.8 V, V2 = 0 V, V4 = 0.5 V. 14. Overcharge detection delay time (Test condition 9, test circuit 5) The overcharge detection delay time (tCU) is the time needed for VCO to change from "H" to "L" just after the voltage V1 momentarily increases (within 10 s) from overcharge detection voltage (VCU) 0.2 V to overcharge detection voltage (VCU) 0.2 V under the set condition of V2 = 0 V. 15. Overdischarge detection delay time (Test condition 9, test circuit 5) The overdischarge detection delay time (tDL) is the time needed for VDO to change from "H" to "L" just after the voltage V1 momentarily decreases (within 10 s) from overdischarge detection voltage (VDL) 0.2 V to overdischarge detection voltage (VDL) 0.2 V under the set condition of V2 = 0 V. 18 Rev.7.7_03 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series 16. Discharge overcurrent detection delay time (Test condition 10, test circuit 5) Discharge overcurrent detection delay time (tDIOV) is the time needed for VDO to go to "L" after the voltage V2 momentarily increases (within 10 s) from 0 V to 0.35 V under the set conditions of V1 = 3.5 V, V2 = 0 V. 17. Load short-circuiting detection delay time (Test condition 10, test circuit 5) Load short-circuiting detection delay time (tSHORT) is the time needed for VDO to go to "L" after the voltage V2 momentarily increases (within 10 s) from 0 V to 1.6 V under the set conditions of V1 = 3.5 V, V2 = 0 V. 18. Charge overcurrent detection delay time (Test condition 10, test circuit 5) Charge overcurrent detection delay time (tCIOV) is the time needed for VCO to go to "L" after the voltage V2 momentarily decreases (within 10 s) from 0 V to 0.3 V under the set conditions of V1 = 3.5 V, V2 = 0 V. 19. 0 V battery charge starting charger voltage (0 V battery charge function "available") (Test condition 11, test circuit 2) The 0 V battery charge starting charger voltage (V0CHA) is defined as the voltage between the VDD pin and VM pin at which VCO goes to "H" (VVM 0.1 V or higher) when the voltage V2 is gradually decreased from the starting condition of V1 = V2 = 0 V. 20. 0 V battery charge inhibition battery voltage (0 V battery charge function "unavailable") (Test condition 12, test circuit 2) The 0 V battery charge inhibition battery voltage (V0INH) is defined as the voltage between the VDD pin and VSS pin at which V CO goes to "H" (VVM 0.1 V or higher) when the voltage V1 is gradually increased from the starting conditions of V1 = 0 V, V2 = 4 V. 19 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series R1 = 220 IDD A VDD V1 Rev.7.7_03 V1 S-8211C Series VSS CO V VDO V VCO V VCO V2 COM COM Figure 5 Test Circuit 1 Figure 6 Test Circuit 2 VDD V1 VDD V1 S-8211C Series VSS VM DO CO S-8211C Series VSS COM VM DO A IVM V2 CO A IDO A ICO V4 V3 COM Figure 7 Test Circuit 3 Figure 8 Test Circuit 4 VDD V1 S-8211C Series VSS VM DO Oscilloscope CO Oscilloscope COM Figure 9 Test Circuit 5 20 VM DO CO V VDO IDD A S-8211C Series VSS VM DO VDD V2 V2 Rev.7.7_03 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Operation Remark Refer to " Battery Protection IC Connection Example". 1. Normal status The S-8211C Series monitors the voltage of the battery connected between the VDD pin and VSS pin and the voltage difference between the VM pin and VSS pin to control charging and discharging. When the battery voltage is in the range from overdischarge detection voltage (VDL) to overcharge detection voltage (VCU), and the VM pin voltage is in the range from the charge overcurrent detection voltage (VCIOV) to discharge overcurrent detection voltage (VDIOV), the S-8211C Series turns both the charging and discharging control FETs on. This condition is called the normal status, and in this condition charging and discharging can be carried out freely. The resistance (RVMD) between the VM pin and VDD pin, and the resistance (RVMS) between the VM pin and VSS pin are not connected in the normal status. Caution When the battery is connected for the first time, discharging may not be enabled. In this case, short the VM pin and VSS pin, or set the VM pin's voltage at the level of the charge overcurrent detection voltage (VCIOV) or more and the discharge overcurrent detection voltage (VDIOV) or less by connecting the charger. The S-8211C Series then returns to the normal status. 2. Overcharge status When the battery voltage becomes higher than overcharge detection voltage (VCU) during charging in the normal status and detection continues for the overcharge detection delay time (tCU) or longer, the S-8211C Series turns the charging control FET off to stop charging. This condition is called the overcharge status. The resistance (RVMD) between the VM pin and VDD pin, and the resistance (RVMS) between the VM pin and VSS pin are not connected in the overcharge status. The overcharge status is released in the following two cases ( (1) and (2) ). (1) In the case that the VM pin voltage is higher than or equal to the charge overcurrent detection voltage (VCIOV), and is lower than the discharge overcurrent detection voltage (VDIOV), the S-8211C Series releases the overcharge status when the battery voltage falls below the overcharge release voltage (VCL). (2) In the case that the VM pin voltage is higher than or equal to the discharge overcurrent detection voltage (VDIOV), the S-8211C Series releases the overcharge status when the battery voltage falls below the overcharge detection voltage (VCU). The discharge is started by connecting a load after the overcharge detection, the VM pin voltage rises more than the VSS pin voltage due to the Vf voltage of the parasitic diode, because the discharge current flows through the parasitic diode in the charging control FET. If this VM pin voltage is higher than or equal to the discharge overcurrent detection voltage (VDIOV), the S-8211C Series releases the overcharge status when the battery voltage is lower than or equal to the overcharge detection voltage (VCU). For the actual application boards, changing the battery voltage and the charger voltage simultaneously enables to measure the overcharge release voltage (VCL). In this case, the charger is always necessary to have the equivalent voltage level to the battery voltage. The charger keeps VM pin voltage higher than or equal to the charge overcurrent detection voltage (VCIOV) and lower than or equal to the discharge overcurrent detection voltage (VDIOV). The S-8211C Series releases the overcharge status when the battery voltage falls below the overcharge release voltage (VCL). Caution 1. If the battery is charged to a voltage higher than overcharge detection voltage (VCU) and the battery voltage does not fall below overcharge detection voltage (VCU) even when a heavy load is connected, discharge overcurrent detection and load short-circuiting detection do not function until the battery voltage falls below overcharge detection voltage (VCU). Since an actual battery has an internal impedance of tens of m, the battery voltage drops immediately after a heavy load that causes overcurrent is connected, and discharge overcurrent detection and load shortcircuiting detection function. 2. When a charger is connected after overcharge detection, the overcharge status is not released even if the battery voltage is below overcharge release voltage (VCL). The overcharge status is released when the VM pin voltage goes over the charge overcurrent detection voltage (VCIOV) by removing the charger. 21 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 3. Overdischarge status 3. 1 With power-down function When the battery voltage falls below overdischarge detection voltage (VDL) during discharging in the normal status and the detection continues for the overdischarge detection delay time (tDL) or longer, the S-8211C Series turns the discharging control FET off to stop discharging. This condition is called the overdischarge status. Under the overdischarge status, the VM pin voltage is pulled up by the resistor between the VM pin and VDD pin in the S-8211C Series (RVMD). When voltage difference between the VM pin and VDD pin then is 1.3 V typ. or lower, the current consumption is reduced to the power-down current consumption (IPDN). This condition is called the power-down status. The resistance (RVMS) between the VM pin and VSS pin is not connected in the power-down status and the overdischarge status. The power-down status is released when a charger is connected and the voltage difference between the VM pin and VDD pin becomes 1.3 V typ. or higher. When a battery in the overdischarge status is connected to a charger and provided that the VM pin voltage is lower than 0.7 V typ., the S-8211C Series releases the overdischarge status and turns the discharging FET on when the battery voltage reaches overdischarge detection voltage (VDL) or higher. When a battery in the overdischarge status is connected to a charger and provided that the VM pin voltage is not lower than 0.7 V typ., the S-8211C Series releases the overdischarge status when the battery voltage reaches overdischarge release voltage (VDU) or higher. 3. 2 Without power-down function When the battery voltage falls below overdischarge detection voltage (VDL) during discharging in the normal status and the detection continues for the overdischarge detection delay time (tDL) or longer, the S-8211C Series turns the discharging control FET off to stop discharging. This condition is called the overdischarge status. Under the overdischarge status, the VM pin voltage is pulled up by the resistor between the VM pin and VDD pin in the S-8211C Series (RVMD). The resistance (RVMS) between the VM pin and VSS pin is not connected in the overdischarge status. When a battery in the overdischarge status is connected to a charger and provided that the VM pin voltage is lower than 0.7 V typ., the S-8211C Series releases the overdischarge status and turns the discharging FET on when the battery voltage reaches overdischarge detection voltage (VDL) or higher. When a battery in the overdischarge status is connected to a charger and provided that the VM pin voltage is not lower than 0.7 V typ., the S-8211C Series releases the overdischarge status when the battery voltage reaches overdischarge release voltage (VDU) or higher. 4. Discharge overcurrent status (discharge overcurrent, load short-circuiting) When a battery in the normal status is in the status where the VM pin voltage is equal to or higher than the discharge overcurrent detection voltage (VDIOV) because the discharge current is higher than the specified value and the status lasts for the discharge overcurrent detection delay time (tDIOV), the discharge control FET is turned off and discharging is stopped. This status is called the discharge overcurrent status. In the discharge overcurrent status, the VM pin and VSS pin are shorted by the resistor between VM pin and VSS pin (RVMS) in the S-8211C Series. However, the VM pin voltage is at the VDD potential due to the load as long as the load is connected. When the load is disconnected completely, the VM pin returns to the VSS potential. If the S-8211C Series detects that the VM pin voltage returns to discharge overcurrent detection voltage (VDIOV) or lower, the discharge overcurrent status is restored to the normal status. The S-8211C Series will be restored to the normal status from discharge overcurrent detection status even when the VM pin voltage becomes the discharge overcurrent detection voltage (VDIOV) or lower by connecting the charger. The resistance (RVMD) between the VM pin and VDD pin is not connected in the discharge overcurrent status. 22 Rev.7.7_03 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series 5. Charge overcurrent status When a battery in the normal status is in the status where the VM pin voltage is lower than the charge overcurrent detection voltage (VCIOV) because the charge current is higher than the specified value and the status lasts for the charge overcurrent detection delay time (tCIOV), the charge control FET is turned off and charging is stopped. This status is called the charge overcurrent status. The S-8211C Series will be restored to the normal status from the charge overcurrent status when the VM pin voltage returns to charge overcurrent detection voltage (VCIOV) or higher by removing the charger. The charge overcurrent detection function does not work in the overdischarge status. The resistance (RVMD) between the VM pin and VDD pin, and the resistance (RVMS) between the VM pin and VSS pin are not connected in the charge overcurrent status. 6. 0 V Battery charge function "available" This function is used to recharge a connected battery whose voltage is 0 V due to self-discharge. When the 0 V battery charge starting charger voltage (V0CHA) or a higher voltage is applied between the EB and EB pins by connecting a charger, the charging control FET gate is fixed to the VDD pin voltage. When the voltage between the gate and source of the charging control FET becomes equal to or higher than the turnon voltage due to the charger voltage, the charging control FET is turned on to start charging. At this time, the discharging control FET is off and the charging current flows through the internal parasitic diode in the discharging control FET. When the battery voltage becomes equal to or higher than overdischarge release voltage (VDU), the S-8211C Series enters the normal status. Caution 1. Some battery providers do not recommend charging for a completely self-discharged battery. Please ask the battery provider to determine whether to enable or inhibit the 0 V battery charge function. 2. The 0 V battery charge function has higher priority than the charge overcurrent detection function. Consequently, a product in which use of the 0 V battery charge function is enabled charges a battery forcibly and the charge overcurrent cannot be detected when the battery voltage is lower than overdischarge detection voltage (VDL). 7. 0 V Battery charge function "unavailable" This function inhibits recharging when a battery that is internally short-circuited (0 V battery) is connected. When the battery voltage is the 0 V battery charge inhibition battery voltage (V0INH) or lower, the charging control FET gate is fixed to the EB pin voltage to inhibit charging. When the battery voltage is the 0 V battery charge inhibition battery voltage (V0INH) or higher, charging can be performed. Caution Some battery providers do not recommend charging for a completely self-discharged battery. Please ask the battery provider to determine whether to enable or inhibit the 0 V battery charge function. 23 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 8. Delay circuit The detection delay times are determined by dividing a clock of approximately 3.5 kHz by the counter. Remark 1. The discharge overcurrent detection delay time (tDIOV) and the load short-circuiting detection delay time (tSHORT) start when the discharge overcurrent detection voltage (VDIOV) is detected. When the load shortcircuiting detection voltage (VSHORT) is detected over the load short-circuiting detection delay time (tSHORT) after the detection of discharge overcurrent detection voltage (VDIOV), the S-8211C Series turns the discharging control FET off within the load short-circuiting detection delay time (tSHORT) from the time of detecting VSHORT. VDD DO Pin tD VSS Load short-circuiting detection delay time (tSHORT) 0 tD tSHORT Time VDD VSHORT VM Pin VDIOV VSS Time Figure 10 2. With power-down function When any overcurrent is detected and the overcurrent continues for longer than the overdischarge detection delay time (tDL) without the load being released, the status changes to the power-down status at the point where the battery voltage falls below overdischarge detection voltage (VDL). When the battery voltage falls below overdischarge detection voltage (VDL) due to overcurrent, the S-8211C Series turns the discharging control FET off via overcurrent detection. In this case, if the recovery of the battery voltage is so slow that the battery voltage after the overdischarge detection delay time (tDL) is still lower than the overdischarge detection voltage (VDL), the S-8211C Series shifts to the power-down status. Without power-down function When any overcurrent is detected and the overcurrent continues for longer than the overdischarge detection delay time (tDL) without the load being released, the status changes to the overdischarge status at the point where the battery voltage falls below overdischarge detection voltage (VDL). When the battery voltage falls below overdischarge detection voltage (VDL) due to overcurrent, the S-8211C Series turns the discharging control FET off via overcurrent detection. In this case, if the recovery of the battery voltage is so slow that the battery voltage after the overdischarge detection delay time (tDL) is still lower than the overdischarge detection voltage (VDL), the S-8211C Series shifts to the overdischarge status. 24 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Timing Charts 1. Overcharge detection, overdischarge detection VCU VCL (VCU VHC) Battery voltage VDU (VDL VHD) VDL VDD DO pin voltage VSS VDD CO pin voltage VSS VEB VDD VM pin voltage VDIOV VSS VCIOV VEB Charger connection Load connection Overcharge detection delay time (tCU) Status *1 (1) Overdischarge detection delay time (tDL) (2) (1) (3) (1) *1. (1): Normal status (2): Overcharge status (3): Overdischarge status Remark The charger is assumed to charge with a constant current. Figure 11 25 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 2. Discharge overcurrent detection VCU VCL (VCU VHC) Battery voltage VDU (VDL VHD) VDL VDD DO pin voltage VSS VDD CO pin voltage VSS VDD VM pin voltage VSHORT VDIOV VSS Load connection Discharge overcurrent detection delay time (tDIOV) Status *1 (1) (2) Load short-circuiting detection delay time (tSHORT) (1) *1. (1): Normal status (2): Discharge overcurrent status Remark The charger is assumed to charge with a constant current. Figure 12 26 (2) (1) BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 3. Charge overcurrent detection VCU VCL (VCU VHC) Battery voltage VDU (VDL VHD) VDL VDD DO pin voltage VSS VDD CO pin voltage VSS VEB VDD VM pin voltage VSS VCIOV VEB Charger connection Load connection Status *1 Charge overcurrent detection delay time (tCIOV) (2) (1) Overdischarge detection delay time (tDL) Charge overcurrent detection delay time (tCIOV) (2) (3) (1) (1) *1. (1): Normal status (2): Charge overcurrent status (3): Overdischarge status Remark The charger is assumed to charge with a constant current. Figure 13 27 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Battery Protection IC Connection Example EB R1 VDD Battery C1 S-8211C Series VSS DO CO FET1 VM FET2 R2 EB Figure 14 Table 20 Constants for External Components Symbol FET1 Part N-channel MOS FET Purpose Discharge control Min. Typ. Max. Remark Threshold voltage Overdischarge *1 detection voltage Gate to source withstand voltage *2 Charger voltage Threshold voltage Overdischarge detection voltage*1 Gate to source withstand voltage *2 Charger voltage Resistance should be as small as possible to avoid lowering the 330 overcharge detection accuracy due to current consumption.*3 Connect a capacitor of 0.022 F or 1.0 F higher between VDD pin and VSS pin.*4 Select as large a resistance as possible 2 k to prevent current when a charger is *5 connected in reverse. charge current. If a FET with a threshold voltage equal discharging may be stopped before overdischarge is P P FET2 N-channel MOS FET Charge control R1 Resistor C1 Capacitor *2. *3. *4. *5. ESD protection, For power fluctuation 100 220 For power fluctuation 0.022 F 0.1 F Protection for reverse connection of a 300 2 k charger If the threshold voltage of a FET is low, the FET may not cut the to or higher than the overdischarge detection voltage is used, detected. If the withstand voltage between the gate and source is lower than the charger voltage, the FET may be destroyed. If a high resistor is connected to R1, the voltage between VDD pin and VSS pin may exceed the absolute maximum rating when a charger is connected in reverse since the current flows from the charger to the IC. Insert a resistor of 100 or higher as R1 for ESD protection. If a capacitor of less than 0.022 F is connected to C1, DO pin may oscillate when load short-circuiting is detected. Be sure to connect a capacitor of 0.022 F or higher to C1. If a resistor of 2 k or higher is connected to R2, the charge current may not be cut when a high-voltage charger is connected. R2 *1. Resistor Caution 1. The above constants may be changed without notice. 2. It has not been confirmed whether the operation is normal or not in circuits other than the above example of connection. In addition, the example of connection shown above and the constant do not guarantee proper operation. Perform thorough evaluation using the actual application to set the constant. 28 Rev.7.7_03 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Precautions The application conditions for the input voltage, output voltage, and load current should not exceed the package power dissipation. Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit. ABLIC Inc. claims no responsibility for any and all disputes arising out of or in connection with any infringement by products including this IC of patents owned by a third party. 29 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Characteristics (Typical Data) 1. Current consumption 1. 1 IOPE vs. Ta 1. 2 IPDN vs. Ta 5 4 IPDN [A] IOPE [A] 6 3 2 1 0 40 25 0 25 Ta [C] 50 75 85 4 VDD [V] 6 8 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 40 25 0 25 Ta [C] 50 7585 1. 3 IOPE vs. VDD IOPE [A] 6 5 4 3 2 1 0 0 2 2. Overcharge detection / release voltage, overdischarge detection / release voltage, overcurrent detection voltage, and delay time 4.350 4.345 4.340 4.335 4.330 4.325 4.320 4.315 4.310 4.305 4.300 40 25 2. 2 VCL vs. Ta VCL [V] VCU [V] 2. 1 VCU vs. Ta 0 25 Ta [C] 50 75 85 30 2.95 2.94 2.93 2.92 2.91 2.90 2.89 2.88 2.87 2.86 2.85 40 25 0 25 Ta [C] 50 75 85 50 75 85 2. 4 VDL vs. Ta VDL [V] VDU [V] 2. 3 VDU vs. Ta 4.125 4.115 4.105 4.095 4.085 4.075 4.065 4.055 4.045 4.035 4.025 40 25 0 25 50 Ta [C] 75 85 2.60 2.58 2.56 2.54 2.52 2.50 2.48 2.46 2.44 2.42 2.40 40 25 0 25 Ta [C] BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 tCU [s] 1.50 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 1.05 1.00 40 25 2. 6 tDL vs. Ta 0 25 Ta [C] 50 7585 0.175 0.170 0.165 0.160 0.155 0.150 0.145 0.140 0.135 0.130 0.125 40 25 0 25 Ta [C] 50 75 85 VCIOV [V] tDIOV [ms] 50 7585 14 13 12 11 10 9 8 7 6 5 4 3.0 3.5 4.0 4.5 2. 10 VCIOV vs. Ta 0 25 Ta [C] 50 75 85 2. 11 tCIOV vs. VDD 0.05 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 40 25 0 25 Ta [C] 50 7585 2. 12 tCIOV vs. Ta tCIOV [ms] tCIOV [ms] 25 Ta [C] VDD [V] 2. 9 tDIOV vs. Ta 14 13 12 11 10 9 8 7 6 5 4 3.0 0 2. 8 tDIOV vs. VDD tDIOV [ms] VDIOV [V] 2. 7 VDIOV vs. Ta 14 13 12 11 10 9 8 7 6 5 4 40 25 200 190 180 170 160 150 140 130 120 110 100 40 25 tDL [ms] 2. 5 tCU vs. Ta 3.5 4.0 VDD [V] 4.5 14 13 12 11 10 9 8 7 6 5 4 40 25 0 25 Ta [C] 50 75 85 31 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 40 25 2. 14 tSHORT vs. VDD tSHORT [ms] VSHORT [V] 2. 13 VSHORT vs. Ta 0 25 50 Ta [C] 7585 tSHORT [ms] 32 0 25 50 Ta [C] 7585 0.65 0.63 0.61 0.59 0.57 0.55 0.53 0.51 0.49 0.47 0.45 3.0 3.5 4.0 VDD [V] 2. 15 tSHORT vs. Ta 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 40 25 Rev.7.7_03 4.5 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 3. CO pin / DO pin 3. 2 ICOL vs. VCO 0 0.5 0.1 0.4 ICOL [mA] ICOH [mA] 3. 1 ICOH vs. VCO 0.2 0.3 0.4 0.5 0.3 0.2 0.1 0 1 2 3 0 4 0 1 2 VCO [V] VCO [V] 0 0.05 0.10 0.20 0.15 0.20 0.25 0.30 4 3. 4 IDOL vs. VDO IDOL [mA] IDOH [mA] 3. 3 IDOH vs. VDO 3 0 1 2 VDO [V] 3 4 0.15 0.10 0.05 0 0 0.5 1.0 VDO [V] 1.5 33 BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 Marking Specifications 1. SOT-23-5 Top view 5 (1) to (3): (4): 4 Product code (refer to Product name vs. Product code) Lot number (1) (2) (3) (4) 1 2 3 Product name vs. Product code Product Name Product Code (1) (2) (3) Product Name S-8211CAA-M5T1x R Z A S-8211CAU-M5T1x S-8211CAB-M5T1x R Z B S-8211CAV-M5T1x S-8211CAD-M5T1x R Z D S-8211CAY-M5T1x S-8211CAE-M5T1x R Z E S-8211CAZ-M5T1x S-8211CAF-M5T1x R Z F S-8211CBV-M5T1x S-8211CAH-M5T1x R Z H S-8211CCD-M5T1U S-8211CAI-M5T1x R Z I S-8211CCJ-M5T1U S-8211CAJ-M5T1x R Z J S-8211CCK-M5T1U S-8211CAK-M5T1x R Z K S-8211CCQ-M5T1U S-8211CAL-M5T1x R Z L S-8211CCR-M5T1U S-8211CAM-M5T1x R Z M S-8211CCT-M5T1U S-8211CAN-M5T1x R Z N S-8211CCV-M5T1U S-8211CAO-M5T1x R Z O S-8211CCW-M5T1U S-8211CAP-M5T1x R Z P S-8211CDB-M5T1U S-8211CAQ-M5T1x R Z Q S-8211CDD-M5T1U S-8211CAR-M5T1x R Z R S-8211CDG-M5T1U S-8211CAS-M5T1x R Z S S-8211CDJ-M5T1U S-8211CAT-M5T1x R Z T S-8211CDN-M5T1U Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. 34 Product Code (1) (2) (3) R R R R R R R R R R R R R R R R R R Z Z Z Z 7 8 8 8 8 8 8 8 8 6 6 6 6 6 U V Y Z V D J K Q R T V W B D G J N BATTERY PROTECTION IC FOR 1-CELL PACK S-8211C Series Rev.7.7_03 2. SNT-6A Top view 6 5 (1) to (3): (4) to (6): 4 Product code (refer to Product name vs. Product code) Lot number (1) (2) (3) (4) (5) (6) 1 2 3 Product name vs. Product code Product Name S-8211CAA-I6T1U S-8211CAB-I6T1U S-8211CAD-I6T1U S-8211CAE-I6T1U S-8211CAF-I6T1U S-8211CAH-I6T1U S-8211CAI-I6T1U S-8211CAJ-I6T1U S-8211CAK-I6T1U S-8211CAL-I6T1U S-8211CAM-I6T1U S-8211CAN-I6T1U S-8211CAO-I6T1U S-8211CAP-I6T1U S-8211CAQ-I6T1U S-8211CAR-I6T1U S-8211CAS-I6T1U S-8211CAT-I6T1U S-8211CAU-I6T1U S-8211CAV-I6T1U S-8211CAW-I6T1U S-8211CAX-I6T1U S-8211CAY-I6T1U S-8211CAZ-I6T1U S-8211CBA-I6T1U S-8211CBB-I6T1U S-8211CBD-I6T1U S-8211CBF-I6T1U S-8211CBH-I6T1U S-8211CBJ-I6T1U S-8211CBN-I6T1U S-8211CBO-I6T1U Product Code (1) (2) (3) R Z A R Z B R Z D R Z E R Z F R Z H R Z I R Z J R Z K R Z L R Z M R Z N R Z O R Z P R Z Q R Z R R Z S R Z T R Z U R Z V R Z W R Z X R Z Y R Z Z R 7 A R 7 B R 7 D R 7 F R 7 H R 7 J R 7 N R 7 O Product Name S-8211CBR-I6T1U S-8211CBV-I6T1U S-8211CBW-I6T1U S-8211CBZ-I6T1U S-8211CCB-I6T1U S-8211CCC-I6T1U S-8211CCD-I6T1U S-8211CCE-I6T1U S-8211CCF-I6T1U S-8211CCG-I6T1U S-8211CCH-I6T1U S-8211CCI-I6T1U S-8211CCJ-I6T1U S-8211CCM-I6T1U S-8211CCN-I6T1U S-8211CCS-I6T1U S-8211CCU-I6T1U S-8211CCW-I6T1U S-8211CCX-I6T1U S-8211CCY-I6T1U S-8211CCZ-I6T1U S-8211CDA-I6T1U S-8211CDC-I6T1U S-8211CDE-I6T1U S-8211CDF-I6T1U S-8211CDH-I6T1U S-8211CDI-I6T1U S-8211CDK-I6T1U S-8211CDL-I6T1U S-8211CDM-I6T1U S-8211CDO-I6T1U S-8211CDP-I6T1U Product Code (1) (2) (3) R 7 R R 7 V R 7 W R 7 Z R 8 B R 8 C R 8 D R 8 E R 8 F R 8 G R 8 H R 8 I R 8 J R 8 M R 8 N R 8 S R 8 U R 8 W R 8 X R 8 Y R 8 Z R 6 A R 6 C R 6 F R 6 E R 6 H R 6 I R 6 K R 6 L R 6 M R 6 O R 6 P 35 2.90.2 1.90.2 4 5 1 2 +0.1 0.16 -0.06 3 0.950.1 0.40.1 No. MP005-A-P-SD-1.3 TITLE SOT235-A-PKG Dimensions No. MP005-A-P-SD-1.3 ANGLE UNIT mm ABLIC Inc. 4.00.1(10 pitches:40.00.2) +0.1 o1.5 -0 +0.2 o1.0 -0 2.00.05 0.250.1 4.00.1 1.40.2 3.20.2 3 2 1 4 5 Feed direction No. MP005-A-C-SD-2.1 TITLE SOT235-A-Carrier Tape No. MP005-A-C-SD-2.1 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. MP005-A-R-SD-1.1 SOT235-A-Reel TITLE No. MP005-A-R-SD-1.1 ANGLE QTY. UNIT mm ABLIC Inc. 3,000 1.570.03 6 1 5 4 2 3 +0.05 0.08 -0.02 0.5 0.480.02 0.20.05 No. PG006-A-P-SD-2.1 TITLE SNT-6A-A-PKG Dimensions No. PG006-A-P-SD-2.1 ANGLE UNIT mm ABLIC Inc. +0.1 o1.5 -0 4.00.1 2.00.05 0.250.05 +0.1 1.850.05 o0.5 -0 4.00.1 0.650.05 3 2 1 4 5 6 Feed direction No. PG006-A-C-SD-2.0 TITLE SNT-6A-A-Carrier Tape No. PG006-A-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. PG006-A-R-SD-1.0 SNT-6A-A-Reel TITLE No. PG006-A-R-SD-1.0 ANGLE QTY. UNIT mm ABLIC Inc. 5,000 0.52 1.36 2 0.52 0.2 0.3 1. 2. 1 (0.25 mm min. / 0.30 mm typ.) (1.30 mm ~ 1.40 mm) 0.03 mm SNT 1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.). 2. Do not widen the land pattern to the center of the package ( 1.30 mm ~ 1.40 mm ). Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package. 2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm or less from the land pattern surface. 3. Match the mask aperture size and aperture position with the land pattern. 4. Refer to "SNT Package User's Guide" for details. 1. 2. (0.25 mm min. / 0.30 mm typ.) (1.30 mm ~ 1.40 mm) No. PG006-A-L-SD-4.1 TITLE SNT-6A-A -Land Recommendation No. PG006-A-L-SD-4.1 ANGLE UNIT mm ABLIC Inc. Disclaimers (Handling Precautions) 1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and application circuit examples, etc.) is current as of publishing date of this document and is subject to change without notice. 2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of any specific mass-production design. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the reasons other than the products described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use of the information described herein. 3. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by the incorrect information described herein. 4. Be careful to use the products within their ranges described herein. Pay special attention for use to the absolute maximum ratings, operation voltage range and electrical characteristics, etc. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by failures and / or accidents, etc. due to the use of the products outside their specified ranges. 5. Before using the products, confirm their applications, and the laws and regulations of the region or country where they are used and verify suitability, safety and other factors for the intended use. 6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related laws, and follow the required procedures. 7. The products are strictly prohibited from using, providing or exporting for the purposes of the development of weapons of mass destruction or military use. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by any provision or export to the person or entity who intends to develop, manufacture, use or store nuclear, biological or chemical weapons or missiles, or use any other military purposes. 8. The products are not designed to be used as part of any device or equipment that may affect the human body, human life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses by ABLIC, Inc. Do not apply the products to the above listed devices and equipments. ABLIC Inc. is not liable for any losses, damages, claims or demands caused by unauthorized or unspecified use of the products. 9. In general, semiconductor products may fail or malfunction with some probability. The user of the products should therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction. The entire system in which the products are used must be sufficiently evaluated and judged whether the products are allowed to apply for the system on customer's own responsibility. 10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the product design by the customer depending on the intended use. 11. The products do not affect human health under normal use. However, they contain chemical substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be careful when handling these with the bare hands to prevent injuries, etc. 12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used. 13. The information described herein contains copyright information and know-how of ABLIC Inc. The information described herein does not convey any license under any intellectual property rights or any other rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this document described herein for the purpose of disclosing it to a third-party is strictly prohibited without the express permission of ABLIC Inc. 14. For more details on the information described herein or any other questions, please contact ABLIC Inc.'s sales representative. 15. This Disclaimers have been delivered in a text using the Japanese language, which text, despite any translations into the English language and the Chinese language, shall be controlling. 2.4-2019.07 www.ablic.com