(1/7) Common Mode Choke Coils(Line Filters) for Signal Line Conformity to RoHS Directive UF and TF Series TDK's compact type common mode choke coils are suitable for protecting telephone circuitry from interference such as radio broadcasts or noise conducted from the DC side of an AC adapter. FEATURES * Compact size and lightweight. * High reduction over a wide range of frequencies. PRODUCT IDENTIFICATION UF (1) (2) V - A (3) (4) Y (5) R (6) - 01 (7) (1) Core shape UF: U-type core TF: Toroidal core (2) Dimensional code Widthx Depth (3) External shape code V: Vertical type H: Horizontal type (4) High material (5) Inductance value Example) 133:13mH (6) Rated current value Example) 3R0:3.0A (7) Product management number SELECTION CHART Series Configuration UF Two sections bobbin types TF Compact Type Inductance value min. Rated current (A) Handling power Lx I2(mHx A2) Weight (g)typ. UF1717VB UF1717HB TF0402S-01 TF0804S TF0402B TF0804B TF0804V 7, 15mH 7, 15mH 7H 3 to 200H 13H 25H 60H 0.15 to 0.3 0.15 to 0.3 0.7 1 to 1.6 0.5 0.5 1 0.3 0.3 -- -- -- -- -- 4 4 0.14 2 0.35 2 2 Minimum package quantity (pieces/box) 640 480 5000 1000 1680 1800 1200 Handling power=(Inductance value)x (Current)2. It is possible to design within the range below this value. [Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10. * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * All specifications are subject to change without notice. 001-03 / 20061108 / e97_uf_tf.fm (2/7) Compact and Separable Bobbin Type UF Series TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 1000 15.5max. 11max. UF1717VB/UF1717HB TYPES SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM UF1717VB UF1717HB 17.5max. 17.5max. 2 4 1 L1 4 2 L2 3 2 80.5 3 702 Inductance (mH)min. 15 7 15 7 1 Recommended hole diameter: o0.9 Dimensions in mm 0.1 0.01 0.1 1 Frequency (MHz) 10 100 RATINGS DC resistance ()max. 5 2.5 5 2.5 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES UF1717VB UF1717HB 10 Weight: 4g typ. ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Part No. 153 4 1 3 UF1717VB-153YR15-01 UF1717VB-702Y0R3-01 UF1717HB-153YR15-01 UF1717HB-702Y0R3-01 Impedance (k) 12.5max. o0.6 70.5 80.5 1 70.5 o0.6 41 41 17max. 100 Rated current Iac(A)max. 0.15 0.3 0.15 0.3 Item Rated voltage(V) Insulation resistance (M) Temperature rise(C) Operating temperature range(C) Storage temperature range(C) Resistance to soldering tenperature Standard value 50 100min. 45max. -20 to +105 Conditions 50Hz/60Hz Between each winding for DC.500V With line resistance Including self-temperature rise -20 to +60 2605C, 101sec Solder bath method 3505C, 5sec max. Soldering iron method Pb free solder(Sn-3Ag-0.5Cu) 640pieces/box 480pieces/box * All specifications are subject to change without notice. 001-03 / 20061108 / e97_uf_tf.fm (3/7) Small Toroidal Core Type TF Series TF0420S-01 TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM o6.5max. 4.5max. TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 0.1 o0.3 Impedance (k) 10max. 3max. 1 Weight: 0.14g typ. Recommended hole diameter: o0.6 Dimensions in mm 0.01 0.001 0.0001 0.01 Part No. TF0402S-01 DC resistance Rated current ()max. Iac(A)max. 0.019 0.7 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF0402S-01 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (H)min. 7 0.1 5000pieces/box Item Rated voltage(V) Temperature rise(C) Operating temperature range(C) Storage temperature range(C) Resistance to soldering tenperature Standard value 80 to 280 45max. -20 to +120 Conditions 50Hz/60Hz With line resistance Including self-temperature rise -20 to +85 2605C, 101sec Solder bath method 3505C, 5sec max. Soldering iron method Pb free solder(Sn-3Ag-0.5Cu) * All specifications are subject to change without notice. 001-03 / 20061108 / e97_uf_tf.fm (4/7) TF0804S TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TF0804S-201Y1R6-01 TF0804S-01 o11max. 7max. TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS o10max. 6max. 10 TF0804S-201Y1R6 3max. 2 3 o0.4 4 1 2 3 Impedance (k) 1 TF0804S-02 153 102 4max. 1 o0.4 4 0.1 0.01 TF0804S-02 o10max. 6max. 4 1 3max. L1 103 TF0804S-01 0.001 0.0001 0.01 L2 0.1 1 Frequency (MHz) 10 100 3 2 o0.4 Weight: 2g typ. 1 2 3 Recommended hole diameter: o0.7 Dimensions in mm 4 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Part No. TF0804S-201Y1R6-01 TF0804S-01 TF0804S-02 Inductance (H)min. 200 3 60 DC resistance ()max. 0.025 0.05 0.036 Core: coat type * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] Rated current Iac(A)max. 1.6 1 1 Item Rated voltage(V) Temperature rise(C) Operating temperature range(C) Storage temperature range(C) Resistance to soldering tenperature Standard value 80 to 280 45max. -20 to +120 Conditions 50Hz/60Hz With line resistance Including self-temperature rise -20 to +85 2605C, 101sec Solder bath method 3505C, 5sec max. Soldering iron method Pb free solder(Sn-3Ag-0.5Cu) PACKAGING QUANTITIES TF0804S 1000pieces/box * All specifications are subject to change without notice. 001-03 / 20061108 / e97_uf_tf.fm (5/7) TF0402B TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TF0402B-04P-03 TF0402B-05P-01 8max. 7.5max. 7.5max. (3) 7max. 6.1max. 10max. 4.5 3.50.5 4 L1 3 3 2 5.00.5 6 1 2 L2 3 L1 4 2 2.25 2 1 4 1 o0.5 2.25 1 TF0402B-05P-03 4 Weight: 3.5g typ. 3 Recommended hole diameter: o0.9 Dimensions in mm L2 TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 5.5max. 5.5max. 6max. 1 Impedance (k) 0.1 30.5 5-o0.5 3.50.2 1 2 3 3 3.50.2 1 L1 4 5 5 0.01 L2 Dimensions in mm 4 0.001 0.01 Part No. TF0402B-04P-03 TF0402B-05P-01 TF0402B-05P-03 DC resistance (m)max. 45 45 45 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF0402B-04P-03 TF0402B-05P-01 TF0402B-05P-03 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Inductance (H)min. 13 13 13 0.1 Rated current Iac(A)max. 0.5 0.5 0.5 Item Rated voltage(V) Temperature rise(C) Operating temperature range(C) Storage temperature range(C) Resistance to soldering tenperature Standard value 80 to 280 45max. -20 to +120 Conditions 50Hz/60Hz With line resistance Including self-temperature rise -20 to +85 2605C, 101sec Solder bath method 3505C, 5sec max. Soldering iron method Pb free solder(Sn-3Ag-0.5Cu) 1680pieces/box 1680pieces/box 3520pieces/box * All specifications are subject to change without notice. 001-03 / 20061108 / e97_uf_tf.fm (6/7) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 13max. TF0804B TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 10 13max. 1 2 3 4 1 2 3 8 7 8 L2 7 L3 TF0804B-08P-01 4 0.01 5 Weight: 2g typ. 6 5 Recommended hole diameter: o1.1 Dimensions in mm Inductance (H)min. 25 0.001 0.01 0.1 1 Frequency (MHz) 10 100 RATINGS DC resistance Rated current ()max. Iac(A)max. 0.1 0.5 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF0804B 0.1 6 L4 ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Part No. Impedance (k) 7.620.5 L1 o0.7 2.540.5 3.51 11max. 1 1800pieces/box Item Rated voltage(V) Temperature rise(C) Operating temperature range(C) Storage temperature range(C) Resistance to soldering tenperature Standard value 80 to 280 45max. -20 to +120 Conditions 50Hz/60Hz With line resistance Including self-temperature rise -20 to +85 2605C, 101sec Solder bath method 3505C, 5sec max. Soldering iron method Pb free solder(Sn-3Ag-0.5Cu) * All specifications are subject to change without notice. 001-03 / 20061108 / e97_uf_tf.fm (7/7) TF0804V TYPE SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM 13max. TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS 14max. 10 31 Impedance (k) 1 o0.6 4 5.080.5 1 8.5max. 4 1 L1 L2 2 2 7.520.5 3 3 0.01 Weight: 2g typ. Recommended hole diameter: o0.9 Dimensions in mm TF0804V-04P-11 Inductance (H)min. 60 DC resistance Rated current ()max. Iac(A)max. 0.036 1 * Measuring equipment of inductance value: LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz] PACKAGING QUANTITIES TF0804V 0.001 0.01 0.1 1 Frequency (MHz) 10 100 RATINGS ELECTRICAL CHARACTERISTICS (STANDARD LINE UP) Part No. 0.1 1200pieces/box Item Rated voltage(V) Temperature rise(C) Operating temperature range(C) Storage temperature range(C) Resistance to soldering tenperature Standard value 80 to 280 45max. -20 to +120 Conditions 50Hz/60Hz With line resistance Including self-temperature rise -20 to +85 2605C, 101sec Solder bath method 3505C, 5sec max. Soldering iron method Pb free solder(Sn-3Ag-0.5Cu) * All specifications are subject to change without notice. 001-03 / 20061108 / e97_uf_tf.fm