(1/7)
001-03 / 20061108 / e97_uf_tf.fm
• All specifications are subject to change without notice.
Common Mode Choke Coils(Line Filters) for Signal Line
UF and TF Series
TDK’s compact type common mode choke coils are suitable for
protecting telephone circuitry from interference such as radio
broadcasts or noise conducted from the DC side of an AC adapter.
FEATURES
• Compact size and lightweight.
• High reduction over a wide range of frequencies.
PRODUCT IDENTIFICATION
(1) Core shape
UF: U-type core
TF: Toroidal core
(2) Dimensional code
Width×Depth
(3) External shape code
V: Vertical type H: Horizontal type
(4) High µ material
(5) Inductance value
Example) 133:13mH
(6) Rated current value
Example) 3R0:3.0A
(7) Product management number
SELECTION CHART
∗ Handling power=(Inductance value)×(Current)2. It is possible to design within the range below this value.
[Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10.
Conformity to RoHS Directive
UF V -AYR
-01
(1) (2) (3) (4) (5) (6) (7)
Series Configuration Type Inductance value
min.
Rated current
(A)
Handling power∗
L×I2(mH×A2)
Weight
(g)typ.
Minimum
package quantity
(pieces/box)
UF Two sections bobbin types UF1717VB 7, 15mH 0.15 to 0.3 0.3 4 640
UF1717HB 7, 15mH 0.15 to 0.3 0.3 4 480
TF Compact
TF0402S-01 7µH 0.7 — 0.14 5000
TF0804S 3 to 200µH 1 to 1.6 — 2 1000
TF0402B 13µH 0.5 — 0.35 1680
TF0804B 25µH 0.5 — 2 1800
TF0804V 60µH 1 — 2 1200
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/7)
001-03 / 20061108 / e97_uf_tf.fm
• All specifications are subject to change without notice.
Compact and Separable Bobbin Type UF Series
UF1717VB/UF1717HB TYPES
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
UF1717VB UF1717HB
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗ Pb free solder(Sn-3Ag-0.5Cu)
Weight: 4g typ.
Recommended hole diameter: ø0.9
Dimensions in mm
14
23
11max.17max.
ø0.6
4±1
8±0.5
7±0.5
17.5max.
14
23
15.5max.12.5max.
ø0.6
4±1
8±0.5
7±0.5
17.5max.
L2
4
3
L1
1
2
1000
100
10
1
0.1
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
702
153
Part No. Inductance
(mH)min.
DC resistance
(Ω)max.
Rated current
Iac(A)max.
UF1717VB-153YR15-01 15 5 0.15
UF1717VB-702Y0R3-01 7 2.5 0.3
UF1717HB-153YR15-01 15 5 0.15
UF1717HB-702Y0R3-01 7 2.5 0.3
UF1717VB 640pieces/box
UF1717HB 480pieces/box
Item Standard value Conditions
Rated voltage(V) 50 50Hz/60Hz
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +105 Including self-temperature
rise
Storage temperature
range(°C) –20 to +60
Resistance to
soldering tenperature∗
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
(3/7)
001-03 / 20061108 / e97_uf_tf.fm
• All specifications are subject to change without notice.
Small Toroidal Core Type TF Series
TF0420S-01 TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗ Pb free solder(Sn-3Ag-0.5Cu)
ø0.3
3max.
ø6.5max. 4.5max.
10max.
Weight: 0.14g typ.
Recommended hole diameter: ø0.6
Dimensions in mm
1
0.1
0.01
0.001
0.0001
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
Part No. Inductance
(µH)min.
DC resistance
(Ω)max.
Rated current
Iac(A)max.
TF0402S-01 7 0.019 0.7
TF0402S-01 5000pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
(4/7)
001-03 / 20061108 / e97_uf_tf.fm
• All specifications are subject to change without notice.
TF0804S TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TF0804S-201Y1R6-01 TF0804S-01
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
∗ Core: coat type
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗ Pb free solder(Sn-3Ag-0.5Cu)
21 3421 34
ø0.4
3max.
ø10max.
15±3
6max.
ø0.4
4max.
ø11max.
10±2
7max.
21 34
ø0.4
3max.
ø10max.
10±3
6max.
4
2
1
3
L1L2
Weight: 2g typ.
Recommended hole diameter: ø0.7
Dimensions in mm
TF0804S-02
1
10
0.1
0.01
0.001
0.0001
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
TF0804S-201Y1R6
TF0804S-01
TF0804S-02
Part No. Inductance
(µH)min.
DC resistance
(Ω)max.
Rated current
Iac(A)max.
TF0804S-201Y1R6-01∗ 200 0.025 1.6
TF0804S-01 3 0.05 1
TF0804S-02 60 0.036 1
TF0804S 1000pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
(5/7)
001-03 / 20061108 / e97_uf_tf.fm
• All specifications are subject to change without notice.
TF0402B TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TF0402B-04P-03 TF0402B-05P-01
TF0402B-05P-03 TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗ Pb free solder(Sn-3Ag-0.5Cu)
10max.
6.1max.
3.5±0.5
8max.
5.0±0.5
14
23
4
2
1
3
L1L2
7.5max.
4.5
7.5max.
(3)
2.25 2.25
ø0.5
1
2
34
6
7max.
Weight: 3.5g typ.
Recommended hole diameter: ø0.9
Dimensions in mm
4
2
1
3
L1L2
3
5
1
123
54
4
L1L2
5.5max.
3.5±0.2
6max.3.5±0.2 5.5max.3±0.5
5-ø0.5
Dimensions in mm
1
0.1
0.01
0.001
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
Part No. Inductance
(µH)min.
DC resistance
(mΩ)max.
Rated current
Iac(A)max.
TF0402B-04P-03 13 45 0.5
TF0402B-05P-01 13 45 0.5
TF0402B-05P-03 13 45 0.5
TF0402B-04P-03 1680pieces/box
TF0402B-05P-01 1680pieces/box
TF0402B-05P-03 3520pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
(6/7)
001-03 / 20061108 / e97_uf_tf.fm
• All specifications are subject to change without notice.
TF0804B TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗ Pb free solder(Sn-3Ag-0.5Cu)
11max.
ø0.7
2.54±0.5
7.62±0.5
3.5±1
2
18
7
L1
L2
13max.
13max.
L3
L4
36
45
1
3
4
8
6
7
5
2
Weight: 2g typ.
Recommended hole diameter: ø1.1
Dimensions in mm
10
1
0.1
0.01
0.001
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
Part No. Inductance
(µH)min.
DC resistance
(Ω)max.
Rated current
Iac(A)max.
TF0804B-08P-01 25 0.1 0.5
TF0804B 1800pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
(7/7)
001-03 / 20061108 / e97_uf_tf.fm
• All specifications are subject to change without notice.
TF0804V TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗ Pb free solder(Sn-3Ag-0.5Cu)
13max.
3±1 14max.
ø0.6
7.52±0.5
8.5max.
5.08±0.5
4
2
1
3
L1L2
Weight: 2g typ.
Recommended hole diameter: ø0.9
Dimensions in mm
14
23
10
1
0.1
0.01
0.001
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
Part No. Inductance
(µH)min.
DC resistance
(Ω)max.
Rated current
Iac(A)max.
TF0804V-04P-11 60 0.036 1
TF0804V 1200pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
