1350-1, 1350-2 Tape Flame-Retardant Tape with Polyester Film and Acrylic Pressure-Sensitive Adhesive Data Sheet Product Description Applications 3MTM 1350 Tape is an electrical insulating polyester film tape, which meets the flame-retardancy requirements of UL 510. It consists of materials that are represented in many UL Recognized Insulation Systems and has a Ul 130C temperature rating. It also offers excellent flagging and solvent resistance; good wet grab; smooth, even unwind and is suitable for use on automated equipment. 3M 1350 Tape is especially suited for applications such as wrapping coils, capacitors, wire harnesses, transformers, shaded pole motors and fractional horsepower motors. UL and CSA Component Recognition UL Recognized for use at temperature not exceeding 130C, flame retardant per UL Standard 510, UL File Number E17385, Product Category AOANZ2. Underwriters Laboratories (UL) Recognized products are evaluated for use as components of end-product equipment that is Listed or Classified by UL. To achieve Underwriters Laboratories Recognition, component construction must meet UL specifications and conditions of acceptability for proper and safe use of the component products, 3M Flame Retardant Tape with Polyester Film and Acrylic Pressure Sensitive Adhesive. * UL Recognized flame retardant * UL Recognized Class 130C/CSA * Excellent Flagging Resitant * Printable * Solvent resistant without thermosetting * Excellent shelf life Colors 3M 1350 Tape is available in yellow, white and black. Typical Properties 1-mil Film 2-mil Film Adhesive Acrylic Acrylic Backing Polyester Film Polyester Film Backing Thickness1 One mil (25 micron) Two mils (50 micron) Total Thickness1 2.5 mils / 0,063 mm 3.5 mils / 0,088 mm Colors Yellow, White, Black Yellow, White, Black Temperature Class 130C (266F) 130C (266F) Dielectric Breakdown 1 5500 Volts 7,000 Volts Insulation Resistance (megohms) >1 x 10 >1 x 106 Breaking Strength 25 lbs. / in (44 N/10mm) 50 lbs. / in(88N/10mm) 1 1 1 6 Elongation (% at break) 100 110 Electrolytic Corrosion Factor3 1.0 1.0 Adhesion to Steel1 30 oz/in (3,3N/10mm) 30 oz/in (3,3N/10mm) UL510 Flame Retardant Printable 2 Yes Yes Yes Yes Note: Typical properties are not recommended for specification purposes. Product specifications will be provided upon request. Footnote: 1 Test Method ASTM D 1000 2 UL-recognized for flame retardancy per UL510, Product Category OANZ2, File E17385 3 3M Test Method-Available on request 3M is a trademark of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 http://www.3M.com/elpd/oem Litho in USA. (c) 3M IPC 2000 78-8124-4751-0-B