DATA SHEE
T
SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
Class 2, Y5V
16/25/50
V
Preliminar
y
specification – Dec 26, 2005 V.11
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 2 www.yageo.com
FEATURES
• Five standard sizes
• High capacitance per unit volume
• Supplied in tape on reel
• NiSn terminations.
APPLICATIONS
• Consumer electronics, for
example:
− Tuners
− Television receivers
− Video recorders
− All types of cameras
− Mobile telephones.
DESCRIPTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives rise
to a high capacitance per unit
volume.
The inner electrodes are connected
to the two terminations and finally
covered with a layer of plated tin
(NiSn). A cross section of the
structure is shown in Fig.1.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Rated voltage UR (DC) 16 V, 25 V, 50 V
Capacitance range (E6 series) 10 nF to 10 µF; note 1
Tolerance on capacitance ±20% (M); −20% to +80% (Z)
Test voltage (DC) for 1 minute: 2.5 × UR
Sectional specifications IEC 60384-10, second edition 1989-04
Detailed specification based on IEC 60384-10-1
End terminations NiSn
Climatic category (IEC 60068) 30/85/21
Note
1. Measured at 25
°C, 1 V and 1 kHz, using a four-gauge method.
MLB457
terminations
electrodes
ceramic material
Fig.1 Construction of a ceramic multilayer capacitor.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 3 www.yageo.com
MECHANICAL DATA
MBB211
T
L4
L1
L2L3
W
Fig.2. Component outline.
For dimensions see Table 1.
Physical dimensions
Table 1 Capacitor dimensions; see Fig.2
T L2 and L3 .
CASE SIZE L1 W
MIN. MAX. MIN. MAX.
L4
MIN.
Dimensions in millimetres
0402 1.0 ±0.05 0.5
±0.05 0.45 0.55 0.15 0.30 0.40
0603 1.6 ±0.10 0.8 ±0.07 0.73 0.87 0.25 0.65 0.40
0805 2.0
±0.10 1.25
±0.10 0.50 1.35 0.25 0.75 0.55
1206 3.2
±0.15 1.6
±0.15 0.50 1.75 0.25 0.75 1.40
1210 3.2
±0.20 2.5
±0.20 1.40 1.60 0.25 0.75 1.40
Dimensions in inches
0402 0.040 ±0.002 0.020
±0.002 0.018 0.022 0.008 0.012 0.016
0603 0.063
±0.004 0.032
±0.003 0.029 0.035 0.010 0.026 0.016
0805 0.079 ±0.004 0.049 ±0.004 0.020 0.053 0.010 0.030 0.022
1206 0.126
±0.006 0.063
±0.006 0.020 0.069 0.010 0.030 0.056
1210 0.126
±0.008 0.098
±0.008 0.047 0.069 0.010 0.030 0.056
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 4 www.yageo.com
SELECTION CHART FOR 16 V AND 25 V
16 V 25 V
C
(nF)
LAST
TWO
DIGITS
OF
12NC
0402 0603 0805 1206 1210 0603 0805 1206 1210
1 23
1.5 25
2.2 27
3.3 29
4.7 32
6.8 34
10 36 0.5
±
0.05 0.8
±
0.07
15 38
22 41
33 43
47 45
68 47
100 49 0.6
±
0.1 0.6
±
0.1
150 52 0.8
±
0.07 0.85
±
0.1
220 54
330 56
470 58 0.85
±
0.1 0.85
±
0.1
680 61
1,000 63 0.85
±
0.1 1.15
±
0.1
2,200 67 1.15
±
0.1 0.85
±
0.1
4,700 72 0.85
±
0.1 0.85
±
0.1
10,000 76 1.15
±
0.1 1.5
±
0.1 1.15
±
0.1 1.5
±
0.1
Note
1. Values in shaded cells indicate thickness class in mm.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 5 www.yageo.com
SELECTION CHART FOR 50 V
50 V
C
(nF)
LAST
TWO
DIGITS
OF
12NC
0603 0805 1206
10 05 0.8
±
0.07 0.6
±
0.1
15 06
22 07
33 08
47 09
68 11
100 12 0.6
±
0.1
150 13 0.85
±
0.1
220 14
330 15
470 16 0.85
±
0.1
680 17
1 000 18 1.15
±
0.1
Note
1. Values in shaded cells indicate thickness class in mm.
Thickness classification and packing quantities
8 mm TAPE WIDTH QUANTITY PER REEL QUANTITY PER BULK CASE
∅180 mm; 7" ∅330 mm; 13"
THICKNESS
CLASSIFICATION
(mm) PAPER BLISTER PAPER BLISTER 0402 0603 0805
0.5 ±0.05 10 000 − 50 000 −50 000 − −
0.6 ±0.10 4 000 − 20 000 − − − 10 000
0.8 ±0.07 4 000 − 15 000 − − 15 000 −
0.85 ±0.10 4 000 − 15 000 − − 15 000 8 000
1.15 ±0.10 − 3 000 −10 000 − − −
1.25 ±0.10 − 3 000 −1 000 − − 5 000
1.5 ±0.10 − 3 000 − − − − −
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 6 www.yageo.com
handbook, full pagewidth
2 2 X X X X X X 9 X X X
Carrier type
22
38
54
blister
paper
bulk
Rated voltage - Termination
78
91
58
16 V; NiSn
25 V; NiSn
50 V; NiSn
Size
7
6
0
1
2
0402
0603
0805
1206
1210
Capacitance value
(1)
Tolerance
7
8
±20%
−20/+80%
Packaging
(2)
1
5
4
reel: ∅180 mm; 7"
reel: ∅330 mm; 13"
bulk case
CCA620_a
(1) Refer to chapters “Selection chart for 16 V and 25 V” and “Selection chart for 50 V”.
(2) Quantity on reel depends on thickness classification, see section “Thickness classification and packing quantities”.
ORDERING INFORMATION
Com
p
onents ma
y
be ordered b
y
usin
g
either a Ph
y
com
p
’s uni
q
ue 12NC or sim
p
le 15-di
g
it clear text code.
Ordering code 12NC (preferred)
Phycomp Clear text code
EXAMPLE: 12062F105M8BB0D
Size
Code
Temp.
Char. Capacitance Tol. Vol. Termination Packing Marking Series
0402
0603
0805
1206
1210
2F = Y5V 105 = 1000000
pF; the third digit
signifies the
multiplying factor:
2 = × 100
3 = × 1000
4 = × 10 000
5 = × 100 000
6 = × 1 000 000
M = ±20%
Z = −20% /+80%
7 = 16 V
8 = 25 V
9 = 50 V
B = NiSn 2 = 180 mm; 7" paper
3 = 330 mm; 13" paper
B = 180 mm; 7" blister
F = 330 mm; 13" blister
P = bulk case
0 = no marking
D = BME
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 7 www.yageo.com
ELECTRICAL CHARACTERISTICS
Class 2 capacitors; Y5V dielectric; NiSn terminations
Unless otherwise stated all electrical values apply at an ambient temperature of 25 ±1 °C, an atmospheric pressure of
86 to 105 kPa, and a relative humidity of 63 to 67%.
DESCRIPTION VALUE
Capacitance range (E6 series); note 1 10 nF to 10 µF
Tolerance on capacitance after 1000 hours ±20% (M); −20% to +80% (Z)
Tan δ; note 1:
all 25 V and 50 V
except 0805 ≥ 330 nF; 0603 /100 nF; 1206 /1 µF; 1210 /10 µF ≤5%
sizes 0805 / 330 nF; 0603 / 100 nF; 1206 /1 F ≤7%
25 V
0805 ≥ 470 nF ≤9%
1210 /10 µF ≤12.5%
all 16 V
except 0402; 0603 ≥ 330 nF; 0805 ≥ 1.5 µF; 1206 ≥ 3.3 µF; 1210 /10 µF≤9%
sizes 0402; 0603 ≥ 330 nF; 0805 ≥ 1.5 µF; 1206 ≥ 3.3 µF; 1210 /10 µF ≤12.5%
Insulation resistance after 1 minute at UR (DC): Rins >10 GΩ or Rins × C ≥500 seconds
whichever is less
Maximum capacitance change with respect to capacitance at 25 °C
(for typical values see Fig.5) +22% to −82%
Ageing typical 7% per time decade
Resistance to soldering heat 260 °C; 10 seconds
Note
1. Measured at 25
°C, 1 V, 1 kHz, using a four-gauge method.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 8 www.yageo.com
050
0
100
80
MBD076
60
40
20
10 20 30 40
∆
C
(%)
V (V)
DC
C
Fig.3 Typical capacitance change with respect to
the capacitance at 1 V as a function of
DC voltage at 25 °C.
25 100
0
500
MBD078
1000
1500
2000
0 255075
T ( C)
o
tan δ
(x 10 )
4
Fig.4 Typical tan
δ as a function of temperature.
25 100
25
100
75
MBD077
50
25
0
0 255075
∆
T ( C)
o
C
(%)
C
Fig.5 Typical capacitance change
as a function of tem
p
erature.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 9 www.yageo.com
TESTS AND REQUIREMENTS
Table 2 Test procedures and requirements
IEC
60384-10/
CECC 32 100
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
4.4 mounting the capacitors may be mounted
on printed-circuit boards or
ceramic substrates by applying
wave soldering, reflow soldering
(including vapour phase
soldering) or conductive
adhesive
no visible damage
4.5 visual inspection and
dimension check
any applicable method using ×10
magnification
in accordance with
specification
4.6.1 capacitance f = 1 kHz; Y5V measuring
voltage 1 Vrms at 25 °C
within specified tolerance
4.6.2 tan
δ f = 1 kHz; Y5V measuring
voltage 1 Vrms at 25 °C
in accordance with
specification
4.6.3 insulation resistance
at UR (DC) for 1 minute RiCR ≥500 s
4.6.4 voltage proof
2.5 × UR for 1 minute no breakdown or flashover
4.7.1 temperature
coefficient
between minimum and maximum
temperature
in accordance with
specification
4.8 adhesion a force of 5 N applied for 10 s to
the line joining the terminations
and in a plane parallel to the
substrate
no visible damage
mounted in accordance with IEC
60384-1, paragraph 4.35
no visible damage 4.9 bond strength of
plating on end face
conditions:
bending 1 mm at a rate of 1
mm/s, radius jig 340 mm
∆C/C: ≤30%
resistance to
soldering heat
preconditioning:
120 to 150 °C during 1 minute;
260 ±5 °C for 10 ±0.5 s in a
static solder bath
the terminations shall be
well tinned
after recovery ∆C/C: ±20%
tan δ: original specification
Rins: original specification
4.10 Tb
resistance to
leaching
260 ±5 °C for 30 ±1 s
in a static solder bath
using visual enlargement
of ×10, dissolution of the
terminations shall not
exceed 10%
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 10 www.yageo.com
IEC
60384-10/
CECC 32 100
CLAUSE
IEC
60068-2
TEST
METHOD
TEST PROCEDURE REQUIREMENTS
4.11 Ta solderability zero hour test, and test after
storage (20 to 24 months) in
original packing in normal
atmosphere;
unmounted chips completely
immersed for 2 ±0.5 s in a
solder bath at 235 ±5 °C
the terminations shall be
well tinned
4.12 Na rapid change of
temperature
preconditioning:
between minimum and
maximum temperature, 5 cycles
no visible damage
after 48 hours recovery:
∆°C/C: ≤ ±20%
4.14 Ca damp heat,
steady state
initialization:
48 ±4 hours after UR at 40 °C
for 1 hour (for initial value
measurement);
500 ±12 hours at 40 °C;
90 to 95% RH; UR applied
no visible damage
after 48 hours recovery:
∆°C/C: +30%/−40%
tan δ: ≤15%
Rins: 500 MΩ or RiCR ≥ 100 s,
whichever is less
damp heat;
with UR load
initialization:
48 hours after UR at 40 °C;
for 1 hour (for initial value
measurement);
500 ±12 hours at 40 °C;
90 to 95% RH; UR applied
preconditioning:
UR at 40 °C for 1 hour, after
48 hours recovery:
∆°C/C: +30%/−40%
tan δ: ≤15%
Rins: 500 MΩ or RiCR ≥ 25 s,
whichever is less
4.15 endurance initialization:
2 × UR at 85 °C for 1 hour,
(initial value measurement after
48 ±4 hours) ;
2 × UR at 85 °C for 1000 hours
recovery 48 ±4 hours at room
temperature
after 48 hours recovery:
∆°C/C: +30%/−40%
tan δ: ≤15%
Rins: 1000 MΩ or RiCR ≥ 50 s,
whichever is less
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 2, Y5V
16/25/50 V
2005 Dec 26 Rev.11 11 www.yageo.com
REVISION HISTORY
Revision Date Change
Notification
Description
Rev.11 Dec 26, 2005 Revised thickness of Y5V 0805 25/50 V 0.33 µF
Rev 10 Sep 21, 2005 − Y5V 0805 16 V thickness revised and range extended from 2.2
µF to 4.7 µF
Rev.9 June 24, 2005
− - Revised thickness of:
Y5V 1206 16 V from 4.7 µF to10 µF
Y5V1206 25 V from 2.2 µF to 10 µF
Rev.8 Jan 13, 2005 − - Revised thickness of Y5V 0805 16 V 1 µF and Y5V 0805 25 V 470
nF to 1 µF
Rev.7 Jul 08, 2003
− - Updated company logo
