Document 100-1 Chip Inductors - 0805CS (2012) * Exceptional Q values, even at high frequencies * Tight tolerances - 2% for most; 1% for some values Part number1 0805CS-020XJL_ 0805CS-3N0XJL_ 0805CS-030XJL_ 0805CS-050XJL_ 0805CS-060XJL_ 0805CS-070XJL_ 0805CS-080X_L_ 0805CS-100X_L_ 0805CS-120X_L_ 0805CS-150X_L_ 0805CS-180X_L_ 0805CS-220X_L_ 0805CS-240X_L_ 0805CS-270X_L_ 0805CS-330X_L_ 0805CS-360X_L_ 0805CS-390X_L_ 0805CS-430X_L_ 0805CS-470X_L_ 0805CS-560X_L_ 0805CS-680X_L_ 0805CS-820X_L_ 0805CS-910X_L_ 0805CS-101X_L_ 0805CS-111X_L_ 0805CS-121X_L_ 0805CS-151X_L_ 0805CS-181X_L_ 0805CS-221X_L_ 0805CS-241X_L_ 0805CS-271X_L_ 0805CS-331X_L_ 0805CS-391X_L_ 0805CS-471X_L_ 0805CS-561X_L_ 0805CS-681X_L_ 0805CS-821X_L_ Inductance2 (nH) 2.8 @ 3.0 @ 3.3 @ 5.6 @ 6.8 @ 7.5 @ 8.2 @ 10 @ 12 @ 15 @ 18 @ 22 @ 24 @ 27 @ 33 @ 36 @ 39 @ 43 @ 47 @ 56 @ 68 @ 82 @ 91 @ 100 @ 110 @ 120 @ 150 @ 180 @ 220 @ 240 @ 270 @ 330 @ 390 @ 470 @ 560 @ 680 @ 820 @ 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 200 MHz 200 MHz 200 MHz 200 MHz 150 MHz 150 MHz 150 MHz 150 MHz 150 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 50 MHz 25 MHz 25 MHz 25 MHz Percent SRF typ5 DCR max6 Irms7 tolerance3 Q min4 (MHz) (Ohms) (mA) 5 5 5 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2 5,2,1 5,2,1 5,2,1 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 1. When ordering, specify tolerance, termination and packaging codes: 0805CS-821XGLC F = 1% G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). Tolerance: * Wirewound construction provides the highest SRFs in 0805 size 80 @ 65 @ 50 @ 65 @ 50 @ 50 @ 50 @ 60 @ 50 @ 50 @ 50 @ 55 @ 50 @ 55 @ 60 @ 55 @ 60 @ 60 @ 60 @ 60 @ 60 @ 65 @ 65 @ 65 @ 50 @ 50 @ 50 @ 50 @ 50 @ 44 @ 48 @ 48 @ 48 @ 33 @ 23 @ 23 @ 23 @ 1500 MHz 1500 MHz 1500 MHz 1000 MHz 1000 MHz 1000 MHz 1000 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 100 MHz 50 MHz 50 MHz 50 MHz 12200 12200 12200 5900 5600 4800 4400 4300 4000 3200 3100 2600 2400 2580 2150 1900 2000 1800 1700 1600 1500 1330 1330 1250 1100 1100 920 920 820 770 730 650 600 375 330 310 310 0.06 0.06 0.08 0.08 0.11 0.14 0.12 0.10 0.15 0.17 0.20 0.22 0.22 0.25 0.27 0.27 0.29 0.34 0.31 0.34 0.38 0.42 0.48 0.46 0.48 0.51 0.56 0.64 0.70 1.00 1.00 1.40 1.50 1.76 1.90 2.20 2.35 800 800 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 350 350 310 290 250 230 190 180 Color code Gray White Black Orange Brown Green Red Blue Orange Yellow Green Blue Gray Violet Gray Orange White Yellow Black Brown Red Orange Black Yellow Brown Green Blue Violet Gray Red White Black Brown Violet Orange Green Blue 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMDD test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15C temperature rise from 25C ambient. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 100-1 Revised 01/11/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 100-2 0805CS Series (2012) Typical Q vs Frequency Typical L vs Frequency 100 12 nH 90 39 nH 22 nH 220 nH 80 6.8 nH 70 Inductance (nH) 68 nH Q Factor 1000 3.3 nH 120 nH 60 50 270 nH 40 30 100 nH 100 39 nH 15 nH 10 3.3 nH 20 10 0 1 10 100 1000 10,000 10 Irms Derating 120 110 90 80 70 60 50 40 30 25C Percent of rated Irms 100 20 10 0 -40 -20 0 20 40 60 80 Ambient temperature (C) 1000 100 Frequency (MHz) Frequency (MHz) 100 120 140 Designer's Kit C303 contains 10 of each 5% part Designer's Kit C303-2 contains 10 of each 2% part Core material Ceramic Environmental RoHS compliant, halogen free optional Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 10.2 - 11.6 mg Ambient temperature -40C to +125C with Irms current, +125C to +140C with derated current Storage temperature Component: -40C to +140C. Tape and reelpackaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +100 to +250 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000/7 reel; 7500/13 reel. Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf B overall H C Pick and place material F G A I J F E terminal A max I D Recommended Land Pattern Terminal wraparound: approx 0.015/0,38 both ends B max C max D ref E F 0.090 0.068 0.060 0.020 0.050 0.020 0.040 0.070 0.040 0.030 inches 2,29 1,52 0,51 1,27 0,51 1,02 1,73 G H 1,78 I 1,02 J 0,76 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 100-2 Revised 01/11/12 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.