OUTPUT VOL TAGE OLT COMP ARA TOR COMPARA ARAT Austin Semiconductor, Inc. High Speed Differential Comparator AS161 PIN ASSIGNMENT (Top View) AVAILABLE AS MILITARY SPECIFICATIONS 14 Pin Ceramic DIP (C014) 14 Pin Flatpack (F014) * MIL-STD-883, Paragraph 1.2.2 Compliant FEATURES * Independent strobes * High Speed: 20ns Max * Tight delay matching on both outputs * Complementary TTL outputs * Operates from op amp supplies: 15V * Low speed variation with overdrive variation * Low input offset voltage * Versatile supply voltage range OPTIONS MARKINGS * Packages 14 Pins Ceramic DIP 14 Pins Ceramic Flatpack 10 Lead Metal Can C014 F014 T010 10 Lead Metal Can (T010) GENERAL DESCRIPTION The AS161 is a very high speed differential input, complementary TTL output voltage comparator with improved characteristics over similar devices for which it is a pin-for-pin replacement. The device has been optimized for greater speed performance and lower input offset voltage. Typically delay varies only 3 ns for over-drive variations of 5 mV to 500 mV. It may be operated from op amp supplies (15V). Complementary outputs having maximum skew are provided. Applications involve high speed analog to digital converters and zero-crossing detectors in disk file systems. LOGIC DIAGRAM For more products and information please visit our web site at www.austinsemiconductor.com *Output is low when current is drawn from strobe pin. AS161 Rev. 0.1 6/03 Austin Semiconductor, Inc. reserves the right to change products or specifications without notice. 1 OUTPUT VOL TAGE OLT COMP ARA TOR COMPARA ARAT Austin Semiconductor, Inc. ABSOLUTE MAXIMUM RATINGS* AS161 *Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Supply Voltage, V+ ..............................................................5V to 15V Supply Voltage, V-............................................................-6V to -15V Supply Voltage, VCC ........................................................4.5V to 5.5V Output Voltage..............................................................................+7.0V Differential Input Voltage...............................................................5V Input Common Mode Voltage........................................................6V Operating Temperature Range, ..................................-55C to 125C Storage Temperature Range........................................-65C to 150C Lead Temperature (Soldering, 10 Sec.).....................................260C ELECTRICAL CHARACTERISTICS (V+ = +10V; VCC = +5V, V- = -10V, TMIN < TA < TMAX, Unless otherwise specified) PARAMETERS Input Offset Voltage CONDITIONS MIN TYP 1 MAX 3 UNITS mV Input Bias Current TA = 25C 5 20 A Input Offset Current TA = 25C 2 3 A Voltage Gain TA = 25C 3 V/mV TA = 25C, f = 1kHz 20 k 3.3 V Input Resistance Logical "1" Output Voltage VCC = 4.75V, ISOURCE = -0.5mA Logical "0" Output Voltage VCC = 4.75V, ISINK = 6.4mA 0.4 V Strobe Input "1" Current (Output Enabled) VCC = 5.25V, ISTROBE = 2.4mA 200 A Strobe Input "0" Current (Output Disabled) VCC = 5.25V, ISTROBE = 0.4mA -1.6 mA Strobe Input "0" Voltage VCC = 4.75V 0.8 V Strobe Input "1" Voltage VCC = 4.75V 2 VCC = 5.25V, VOUT = 0V -18 Output Short Circuit Current 2.4 V V+ = 10V, V- = -10V, VCC = 5.25V, + Supply Current I -55 mA 4.5 mA 10 mA 18 mA -55C<TA<125C V+ = 10V, V- = -10V, VCC = 5.25V, Supply Current I- -55C<TA<125C V+ = 10V, V- = -10V, VCC = 5.25V, Supply Current ICC -55C<TA<125C TRANSIENT RESPONSE 1 VIN = 50mV overdrive Propagation Delay Time (tpd(0)) TA = 25C 14 20 ns Propagation Delay Time (tpd(1)) TA = 25C 14 20 ns Delay Between Output A and B TA = 25C 2 5 ns Strobe Delay Time (tpd(0)) TA = 25C 8 ns Strobe Delay Time (tpd(1)) TA = 25C 8 ns NOTES: 1. Measurements using AC test circuit, Fanout = 1. The devices are faster at low supply voltages. AS161 Rev. 0.1 6/03 Austin Semiconductor, Inc. reserves the right to change products or specifications without notice. 2 OUTPUT VOL TAGE OLT COMP ARA TOR COMPARA ARAT Austin Semiconductor, Inc. AS161 TYPICAL PERFORMANCE CHARACTERISTICS AS161 Rev. 0.1 6/03 Austin Semiconductor, Inc. reserves the right to change products or specifications without notice. 3 OUTPUT VOL TAGE OLT COMP ARA TOR COMPARA ARAT Austin Semiconductor, Inc. AS161 AC TEST CIRCUIT VIN = 50mV V+ = +10V V- = -10V VCC = 5.25V FANOUT = 1 R = 2.4k C = 15pF FANOUT = 4 R = 680 C = 30pF SCHEMATIC DIAGRAM R10, R16: 85 R11, R17: 205 AS161 Rev. 0.1 6/03 Austin Semiconductor, Inc. reserves the right to change products or specifications without notice. 4 OUTPUT VOL TAGE OLT COMP ARA TOR COMPARA ARAT Austin Semiconductor, Inc. AS161 MECHANICAL DEFINITIONS* Package Designator C014 SYMBOL A b b2 c D E e eA L Q S1 S2 ASI SPECIFICATIONS MIN MAX --0.200 0.014 0.026 0.045 0.065 0.008 0.018 --0.785 0.220 0.310 0.100 BCS 0.300 BSC 0.125 0.200 0.015 0.060 0.005 --0.005 --- *All measurements are in inches. AS161 Rev. 0.1 6/03 Austin Semiconductor, Inc. reserves the right to change products or specifications without notice. 5 OUTPUT VOL TAGE OLT COMP ARA TOR COMPARA ARAT Austin Semiconductor, Inc. AS161 MECHANICAL DEFINITIONS* Package Designator F014 SYMBOL A b C D E E1 E2 E3 e L Q S1 ASI SPECIFICATIONS MIN MAX 0.045 0.085 0.010 0.022 0.004 0.009 --0.390 0.235 0.260 --0.280 0.125 --0.030 --0.050 BSC 0.250 0.370 0.026 0.045 0.005 --- *All measurements are in inches. AS161 Rev. 0.1 6/03 Austin Semiconductor, Inc. reserves the right to change products or specifications without notice. 6 OUTPUT VOL TAGE OLT COMP ARA TOR COMPARA ARAT Austin Semiconductor, Inc. AS161 MECHANICAL DEFINITIONS* Package Designator T010 SYMBOL A b D D1 D2 e e1 F k k1 L Q ASI SPECIFICATIONS MIN MAX 0.165 0.185 0.016 0.019 0.335 0.375 0.305 0.335 0.110 0.160 0.230 BSC 0.115 BSC --0.040 0.027 0.034 0.027 0.045 0.500 0.750 0.010 0.045 36 BSC *All measurements are in inches. AS161 Rev. 0.1 6/03 Austin Semiconductor, Inc. reserves the right to change products or specifications without notice. 7 OUTPUT VOL TAGE OLT COMP ARA TOR COMPARA ARAT Austin Semiconductor, Inc. AS161 ORDERING INFORMATION EXAMPLE: AS161C014/MIL Device Number Package Type Process AS161 C014 /* EXAMPLE: AS161F014/MIL Device Number Package Type Process AS161 F014 /* EXAMPLE: AS161T010/MIL Device Number Package Type Process AS161 T010 /* *AVAILABLE PROCESSES IT = Industrial Temperature Range XT = Extended Temperature Range MIL = /883 equivalent processing compliant to paragraph 1.2.2 AS161 Rev. 0.1 6/03 -40oC to +85oC -55oC to +125oC -55oC to +125oC Austin Semiconductor, Inc. reserves the right to change products or specifications without notice. 8