CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 3410 85 ºC, 4-Pin, Multipin Snap-In Aluminum Electrolytic
Round Snap-In Aluminum Electrolytic Capaci-
Type 3410 multipin polarized snap-in aluminum
electrolytic capacitors are great as high ripple current
bus capacitors. The 3410 performs well in linear and
switchmode power supplies and energy storage pulse
Highlights
• Reverse proof keyed polarity with 4 snap-in termi-
nals
• Long useful life of more than 5000 hours at 85 ºC
• Very high ripple current per capacitance value
• Cylindrical insulated case with light blue sleeve
Specications
Capacitance Range:
Voltage Range:
Capacitance Tolerance:
Operating Temperature Range:
DC Leakage Current:
Reverse Voltage:
Ripple Current Multipliers:
330 µF to 1600 µF
100 Vdc to 450 Vdc
±20%
–40 ºC to +85 ºC
≤ 0.002CV+4 µA at 5 minutes
≤ 1 V
Ambient Temperature
45 °C 55 °C 65 °C 75 °C 85 °C
2.24 2.00 1.73 1.41 1.00
Frequency
50 Hz 100 Hz 300 Hz 1000 Hz ≥10 kHz
100 V 0.86 1.00 1.15 1.35 1.45
250–450 V 0.86 1.00 1.25 1.40 1.50
Series Inductance:
Life Endurance:
Expected Life:
Shelf Life:
Vibration:
19 nH typical, 25nH maximum, all case sizes
2,000 h at 85 ºC and rated voltage
Δ Capacitance ±30%
ESR 300% of limit
DCL 100% of limit
≥ 5000 h at 85 ºC and rated ripple current
Δ Capacitance ±15%
ESR 200% of limit
DCL 100% of limit
Total failures ≤ 4%
500 h at 85 ºC and no voltage
Δ Capacitance ±15%
ESR 120% of limit
DCL 200% of limit
10 to 5 Hz, 0.06” and 10g max. 1.5 h ea. of 2 axis
Complies with the EU Directive 2002/95/
EC requirement restricting the use of
Lead (Pb), Mercury (Hg), Cadmium
(Cd), Hexavalent chromium (Cr(VI)),
PolyBrominated Biphenyls (PBB) and
PolyBrominated Diphenyl Ethers (PBDE).
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 3410 85 ºC, 4-Pin, Multipin Snap-In Aluminum Electrolytic
Part Numbering System
3410 DH 331 M 450 H P A2
Type Case Code Capacitance Tolerance Voltage Terminal Insulation Construction
3410 See Table 331 = 330 µF M = ±20% 100 = 100 Vdc H = 4 pins P = 0.008" PVC (factory assigned
163 = 16000 µF 450 = 450 Vdc J = 5 pins sequence number)
(5 pins for
45 & 50 mm
dia)
Case Codes and Dimensions
Case Dimensions, Insulated Can
Diam. (D) Length (L)
Case ±0.031 ±0.8 ±0.062 ±1.6 Typical Weight
Code (in) (mm) (in) (mm) (oz) (g)
DF 1.378 35 2.05 52 2.5 72
DG 1.378 35 2.56 65 3.2 91
DH 1.378 35 3.23 82 4.1 115
DJ 1.378 35 4.21 107 5.3 151
EF 1.575 40 2.05 52 3.3 94
EG 1.575 40 2.56 65 4.2 118
EH 1.575 40 3.23 82 5.3 150
EJ 1.575 40 4.21 107 6.9 197
FF 1.772 45 2.05 52 4.2 119
FG 1.772 45 2.56 65 5.3 150
FH 1.772 45 3.23 82 6.7 190
FJ 1.772 45 4.21 107 8.8 250
GF 1.969 50 2.05 52 5.2 147
GG 1.969 50 2.56 65 6.5 185
GH 1.969 50 3.23 82 8.3 235
GJ 1.969 50 4.21 107 10.9 309
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 3410 85 ºC, 4-Pin, Multipin Snap-In Aluminum Electrolytic
Ratings
Max ESR Ripple Amps Nominal
@ 25 °C Max @ 85 °C Size
Cap. Catalog Part Number 120 Hz 20 kHz 120 Hz 20 kHz D x L
(µF) (Ω) (Ω) (A) (A) (mm)
100 Vdc (125 Vdc Surge)
4700 3410DF472M100HPA1 0.037 0.018 7.70 11.17 35 x 50
5600 3410EF562M100HPA1 0.038 0.018 8.10 11.75 40 x 50
6800 3410DG682M100HPA1 0.031 0.015 9.10 13.20 35 x 63
6800 3410FF682M100HPA1 0.037 0.018 8.90 12.91 45 x 50
8200 3410DH822M100HPA1 0.026 0.012 10.90 15.81 35 x 80
8200 3410EG822M100HPA1 0.027 0.013 10.40 15.08 40 x 63
8200 3410GF822M100HPA1 0.040 0.019 9.10 13.20 50 x 50
10000 3410DJ103M100HPA1 0.021 0.010 13.50 19.58 35 x 105
10000 3410EH103M100HPA1 0.023 0.011 12.20 17.69 40 x 80
10000 3410FG103M100HPA1 0.029 0.014 10.80 15.66 45 x 63
11000 3410FH113M100HPA1 0.025 0.012 12.50 18.13 45 x 80
11000 3410GG113M100HPA1 0.031 0.015 10.80 15.66 50 x 63
12000 3410EJ123M100HPA1 0.021 0.010 14.60 21.17 40 x 105
13000 3410GH133M100HPA1 0.026 0.012 12.70 18.42 50 x 80
14000 3410FJ143M100HPA1 0.020 0.010 15.00 21.75 45 x 105
16000 3410GJ163M100HPA1 0.022 0.010 15.00 21.75 50 x 105
250 Vdc (300 Vdc Surge)
1200 3410DF122M250HPA1 0.085 0.040 5.20 7.54 35 x 50
1400 3410EF142M250HPA1 0.075 0.036 5.90 8.56 40 x 50
1600 3410FF162M250HPA1 0.071 0.034 6.30 9.14 45 x 50
1800 3410DG182M250HPA1 0.055 0.026 7.10 10.30 35 x 63
1900 3410GF192M250HPA1 0.065 0.031 7.10 10.30 50 x 50
2100 3410EG212M250HPA1 0.054 0.026 7.50 10.88 40 x 63
2200 3410DH222M250HPA1 0.048 0.023 7.90 11.46 35 x 80
2500 3410FG252M250HPA1 0.051 0.024 8.10 11.75 45 x 63
2600 3410EH262M250HPA1 0.043 0.020 8.80 12.76 40 x 80
2700 3410DJ272M250HPA1 0.040 0.019 9.40 13.63 35 x 105
3000 3410GG302M250HPA1 0.046 0.022 9.00 13.05 50 x 63
3100 3410FH312M250HPA1 0.041 0.020 9.60 13.92 45 x 80
3300 3410EJ332M250HPA1 0.035 0.017 10.70 15.52 40 x 105
3700 3410GH372M250HPA1 0.037 0.018 10.50 15.23 50 x 80
3900 3410FJ392M250HPA1 0.034 0.016 11.50 16.68 45 x 105
4700 3410GJ472M250HPA1 0.031 0.015 12.50 18.13 50 x 105
350 Vdc (400 Vdc Surge)
560 3410DF561M350HPA1 0.089 0.042 3.40 4.93 35 x 50
680 3410EF681M350HPA1 0.159 0.076 4.00 5.80 40 x 50
820 3410DG821M350HPA1 0.132 0.063 4.50 6.53 35 x 63
820 3410FF821M350HPA1 0.145 0.069 4.50 6.53 45 x 50
1000 3410DH102M350HPA1 0.103 0.049 5.30 7.69 35 x 80
1000 3410EG102M350HPA1 0.112 0.053 5.20 7.54 40 x 63
1000 3410GF102M350HPA1 0.121 0.058 5.20 7.54 50 x 50
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 3410 85 ºC, 4-Pin, Multipin Snap-In Aluminum Electrolytic
Ratings
Max ESR Ripple Amps Nominal
@ 25 °C Max @ 85 °C Size
Cap. Catalog Part Number 120 Hz 20 kHz 120 Hz 20 kHz D x L
(µF) (Ω) (Ω) (A) (A) (mm)
350 Vdc (400 Vdc Surge)
1200 3410DJ122M350HPA1 0.091 0.043 6.30 9.14 35 x 105
1200 3410EH122M350HPA1 0.093 0.044 6.10 8.85 40 x 80
1200 3410FG122M350HPA1 0.102 0.049 5.80 8.41 45 x 63
1400 3410EJ142M350HPA1 0.079 0.038 7.10 10.30 40 x 105
1400 3410FH142M350HPA1 0.087 0.041 6.60 9.57 45 x 80
1400 3410GG142M350HPA1 0.091 0.043 6.40 9.28 50 x 63
1600 3410FJ162M350HPA1 0.075 0.036 7.70 11.17 45 x 105
1600 3410GH162M350HPA1 0.078 0.037 7.30 10.59 50 x 80
1900 3410GJ192M350HPA1 0.066 0.031 8.60 12.47 50 x 105
400 Vdc (450 Vdc Surge)
470 3410DF471M400HPA1 0.209 0.099 3.30 4.79 35 x 50
560 3410EF561M400HPA1 0.178 0.085 3.80 5.51 40 x 50
680 3410DG681M400HPA1 0.146 0.069 4.20 6.09 35 x 63
680 3410FF681M400HPA1 0.161 0.077 4.30 6.24 45 x 50
820 3410DH821M400HPA1 0.122 0.058 5.00 7.25 35 x 80
820 3410EG821M400HPA1 0.125 0.059 4.90 7.11 40 x 63
820 3410GF821M400HPA1 0.137 0.065 4.90 7.11 50 x 50
1000 3410DJ102M400HPA1 0.101 0.048 6.00 8.70 35 x 105
1000 3410EH102M400HPA1 0.102 0.049 5.80 8.41 40 x 80
1000 3410FG102M400HPA1 0.112 0.053 5.50 7.98 45 x 63
1200 3410EJ122M400HPA1 0.089 0.042 6.90 10.01 40 x 105
1200 3410FH122M400HPA1 0.094 0.045 6.40 9.28 45 x 80
1200 3410GG122M400HPA1 0.097 0.046 6.20 8.99 50 x 63
1400 3410FJ142M400HPA1 0.081 0.039 7.50 10.88 45 x 105
1400 3410GH142M400HPA1 0.084 0.040 7.20 10.44 50 x 80
1600 3410GJ162M400HPA1 0.073 0.035 8.20 11.89 50 x 105
450 Vdc (500 Vdc Surge)
330 3410DF331M450HPA1 0.291 0.138 2.80 4.06 35 x 50
390 3410EF391M450HPA1 0.246 0.117 3.20 4.64 40 x 50
470 3410DG471M450HPA1 0.205 0.098 3.60 5.22 35 x 63
470 3410FF471M450HPA1 0.220 0.105 3.70 5.37 45 x 50
560 3410DH561M450HPA1 0.172 0.082 4.20 6.09 35 x 80
560 3410EG561M450HPA1 0.174 0.083 4.10 5.95 40 x 63
560 3410GF561M450HPA1 0.188 0.089 4.20 6.09 50 x 50
680 3410DJ681M450HPA1 0.144 0.068 5.00 7.25 35 x 105
680 3410EH681M450HPA1 0.146 0.205 5.80 4.90 40 x 80
680 3410FG681M450HPA1 0.155 0.074 4.70 6.82 45 x 63
820 3410EJ821M450HPA1 0.122 0.058 5.90 8.56 40 x 105
820 3410FH821M450HPA1 0.129 0.061 5.50 7.98 45 x 80
820 3410GG821M450HPA1 0.133 0.063 5.30 7.69 50 x 63
1000 3410FJ102M450HPA1 0.107 0.051 6.50 9.43 45 x 105
1000 3410GH102M450HPA1 0.107 0.051 6.30 9.14 50 x 80
1200 3410GJ122M450HPA1 0.092 0.044 7.30 10.59 50 x 105
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 3410 85 ºC, 4-Pin, Multipin Snap-In Aluminum Electrolytic
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, conrming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specic customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.