
LM148-N, LM248-N, LM348-N
SNOSBT2E –MAY 1999–REVISED MARCH 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)(2)
LM148 LM248 LM348
Supply Voltage ±22V ±18V ±18V
Differential Input Voltage ±44V ±36V ±36V
Output Short Circuit Duration(3) Continuous Continuous Continuous
Power Dissipation (Pdat 25°C) and Thermal Resistance (θjA)(4)
PDIP (NFF) Pd— — 750 mW
θJA — — 100°C/W
CDIP (J) Pd1100 mW 800 mW 700 mW
θJA 110°C/W 110°C/W 110°C/W
Maximum Junction Temperature (TjMAX) 150°C 110°C 100°C
−55°C ≤TA≤ −25°C ≤TA≤0°C ≤TA≤+70°C
Operating Temperature Range +125°C +85°C
Storage Temperature Range −65°C to +150°C −65°C to +150°C −65°C to +150°C
Lead Temperature (Soldering, 10 sec.) Ceramic 300°C 300°C 300°C
Lead Temperature (Soldering, 10 sec.) Plastic 260°C
Soldering Information
Dual-In-Line Package Soldering (10 seconds) 260°C 260°C 260°C
Vapor Phase (60 seconds) 215°C 215°C 215°C
Small Outline Package Infrared (15 seconds) 220°C 220°C 220°C
ESD tolerance(5) 500V 500V 500V
(1) Refer to RETS 148X for LM148 military specifications.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(3) Any of the amplifier outputs can be shorted to ground indefinitely; however, more than one should not be simultaneously shorted as the
maximum junction temperature will be exceeded.
(4) The maximum power dissipation for these devices must be derated at elevated temperatures and is dictated by TJMAX,θJA, and the
ambient temperature, TA. The maximum available power dissipation at any temperature is Pd= (TJMAX −TA)/θJA or the 25°C PDMAX,
whichever is less.
(5) Human body model, 1.5 kΩin series with 100 pF.
Electrical Characteristics
These specifications apply for VS= ±15V and over the absolute maximum operating temperature range (TL≤TA≤TH) unless
otherwise noted. LM148 LM248 LM348 Units
Parameter Conditions Min Typ Max Min Typ Max Min Typ Max
Input Offset Voltage TA= 25°C, RS≤10 kΩ1.0 5.0 1.0 6.0 1.0 6.0 mV
Input Offset Current TA= 25°C 4 25 4 50 4 50 nA
Input Bias Current TA= 25°C 30 100 30 200 30 200 nA
Input Resistance TA= 25°C 0.8 2.5 0.8 2.5 0.8 2.5 MΩ
Supply Current All TA= 25°C, VS= ±15V 2.4 3.6 2.4 4.5 2.4 4.5 mA
Amplifiers TA= 25°C, VS= ±15V
Large Signal Voltage Gain 50 160 25 160 25 160 V/mV
VOUT = ±10V, RL≥2 kΩ
TA= 25°C, f = 1 Hz to 20 kHz
Amplifier to Amplifier (Input Referred) −120 −120 −120 dB
Coupling See Crosstalk Test Circuit
TA= 25°C,
Small Signal Bandwidth 1.0 1.0 1.0 MHz
LM148 Series
TA= 25°C,
Phase Margin 60 60 60 degrees
LM148 Series (AV= 1)
2Submit Documentation Feedback Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links: LM148-N LM248-N LM348-N