TOGGLE SWITCHES A SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SEE TOGGLE SWITCH SELECTION GUIDE ON NEXT PAGE APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A1 TOGGLE SWITCHES A ESD PROTECTION X X A3-A6 X X A7-A10 TL TINY 0.4VA 20V SP X TINY 1/2A 48V 0.4VA 20V SP,DP TINY 0.5A 48V 0.4VA 20V SP X A11-A13 MINIATURE 4A 125VAC 2A 250VAC SP,DP X A14-A15 SP,DP X TL ! New ZL 21000N ! New S VDE POLES CSA RATINGS (Max. in bold) UL SIZE X X 4A 30VDC MINIATURE 0.4VA 20V 2A 250VAC X X X A16-A19 X X X A20-A22 5A 125VAC 4A 30VDC SF MINIATURE 0.4VA 20V 2A 250VAC 5000 MINIATURE 0.4VA 20V 3A 250VAC SP X SP,DP,3P,4P X 5A 125VAC 4A 30VDC X X X A23-A40 6A 125VAC 4A 30VDC 55000 MINIATURE 6A 125VAC 3A 250VAC SP,DP X X X X ST MINIATURE 6A 125VAC 0.4VA 20V SP,DP X X X X X A41-A44 SP,DP,3P,4P X X A59-A62 DP,3P,4P X X A63-A66 DP,3P,4P X DP X X X X A72-A73 X X X A74-A75 A45-A58 3A 250VAC 7A 30VDC 11000 STANDARD 12000 STANDARD 4A 125VAC 2A 250VAC 4A 30VDC 4A 125VAC 2A 250VAC 4A 30VDC 12000X778 STANDARD 4A 125VAC 2A 250VAC A67-A71 4A 28VDC 4100&4200 STANDARD 6A 125VAC 3A 250VAC 6A 30VDC 4600 STANDARD 6A 125VAC 4A 250VAC SP,DP X 1500 New! STANDARD 10A 125VAC 6A 250VAC SP X A76 6000 STANDARD 10A 125VAC 5A 250VAC SP,DP,3P,4P X A77-A79 SP,DP X A80-A81 SP,DP X A82-A85 SP,DP,3P X ! New 6.5A 30VDC 3600NF STANDARD 3500 STANDARD ! New 6A 250VAC ! New 600H&NH 12A 28VDC 15A 125VAC 10A 250VAC 10A 28VDC STANDARD 20A 125VAC 15A 250VAC X X X A86-A90 10A 24VDC 15A 1/2HP125/250VAC PEAK CURRENT 150A 250VAC A2 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE WASHABLE P. C. MOUNT PAGE(S) SERIES SMT MOUNT PANEL MOUNT TOGGLE SWITCH SELECTION GUIDE: This catalog contains an extensive variety of toggle switches with numerous options and accessories. To facilitate easy selection of the desired switch for your application, this guide lists the various Series with some key selection parameters. TL SERIES - SMT WASHABLE TINY TOGGLE SWITCHES DESIGNED EXCLUSIVELY FOR SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SURFACE MOUNTING SMT TL Series switches incorporate many desireable features that include: Higher protection against p.c. board tear-offs The switch operating force is approx. .56 lbs. while forces required to tear switch off p.c. board are approx. 38 lbs. (F1) and 14 lbs. (F2). A Surface mount devices (SMD) are subject to more stringent constraints of temperature, solderability, sealing and space savings than through-hole components. To meet these requirements, APEM has designed a family of tiny surface mount switches that include TL Series toggle switches, TP Series pushbutton switches, TR Series rocker switches & TG Series slide switches. See pushbutton, rocker & slide switch sections of catalog for TP, TR & TG Series respectively. F1 F2 Tape & reel packaging Recommended for: economy suitability for automated placement handling of large quantities of components per packaging unit positive component positioning protection of terminals against damage during handling high static resistance Reflow solderable High temperature plastic materials Tin plated grounding brackets Tin-lead alloy over nickel terminal plating Terminals turned outward to prevent the shadow effect in infrared soldering and to permit visual inspection of the solder joints .021" (0.55mm) air gap between p.c. board and switch case End stackable pitch .400" (10.16mm) Available with positioning pins to assure correct switch orientation during the reflow process and provide additional mechanical integrity Protected against electrostatic discharges (ESD) up to 10 KV. Washable Switches are designed to withstand cleaning processes, including hot water under pressure. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A3 TL SERIES - SMT WASHABLE TINY TOGGLE SWITCHES A ELECTRICAL SPECIFICATIONS Minimum load: 10 mA at 50 mV or 10A at 5 VD Initial contact resistance: 20 milliohms maximum Insulation resistance: 1000 M min. at 500 VDC Dielectric strength: 1000 V rms between terminals & frame. 500 V rms between terminals Electrical life (at full load): 2 position switches: 60,000 cycles 3 position switches: 30,000 cycles Static resistance: 10 KV (Schaffner equipment) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Contact ratings (resistive lds.): 0.4 VA at 20 V max. (AC or DC) PACKAGING 44.00-0.30 (1.732-.011) Shock resistance: 50 g per IEC 512-4 test 6c MATERIALS Case: High temperature plastic UL94V-0 Actuator: Nickel plated brass with high temperature plastic UL94V-0 cap Grounding brackets: Tin plated steel (includes positioning pins) Contacts: Gold plated brass Terminals: Brass with tin-lead alloy over nickel plate Terminal seal: Epoxy 40.40-0.10 (1.590-.003) A 100.00 DIA mini (3.937 DIA MIN) 10-500 Hz/10g per IEC 512-4 test 6d 12.00 (.472) Vibration resistance: Unrolling Direction -40C to +85C 21 days per IEC 512-6 test 11c 360.00 DIA Maxi (14.173 DIA MAX) Operating temperature range: Moisture resistance: 7.70 (.303) GENERAL SPECIFICATIONS SOLDERING AND CLEANING 13.00 DIA-0.25 DIA DIA (.511 DIA-.009) Reflow soldering: Infrared, vapor phase and infrared convection Washable: Per IEA-RS448-2: water and detergent preferred. Solvents. A4 3.00 (.118) Standard packaging unit: 700 pieces Tape meeting international standard IEC Publication 286-3 (EIA481A) Start leader: 15.7" (400mm) min. Dimension 'A': 1.732" (44.00mm) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com TL SERIES - SMT WASHABLE TINY TOGGLE SWITCHES A Single pole toggle switches II 2.40 DIA (.094 DIA) 3.80 (.149) ON ON MOM MOM MOM I 4.20 (.165) 6.90 (.271) 1.80 (.070) 4.60 DIA (.181 DIA) 5.00 DIA (.196 DIA) 5.15 (.202) 3.05 (.120) 2.54 (.100) 0.50 (.019) 1.50 (.059) 7.96 (.313) 3 2 1 2.10 (.082) CIRCUIT ON ON OFF MOM OFF ON OFF ON III II III 24" 24 10.16 (.400) MODEL NO. TL36WS84000 TL39WS84000 TL37WS84000 TL38WS84000 TL32WS84000 Handle position: 0.80 (.031) 5.55 (.218) 2.54 (.100) 8.10 (.318) Single pole toggle switches with positioning pins 3.81 (.150) III 2.40 DIA (.094 DIA) 1.50 (.059) 2.54 (.100) 1.00 (.039) 8.10 (.318) 0.80 (.031) 3.05 (.120) 5.08 (.200) 5.55 (.218) P.C. BOARD DIMENSIONS LED INDICATOR IN TINY TOGGLE PACKAGE ON - ON Model shown COLOR Red Green Yellow 3.80 (.149) 5.00 DIA (.196 DIA) 1.10 (.043) + 0.60 (.024) 4.20 (.165) 3 1 5.08 (.200) 8.10 (.318) 6.90 (.271) 1.80 (.070) 4.60 DIA (.181 DIA) 3.05 (.120) 5.55 (.218) 1.50 (.059) 7.96 (.313) MODEL NO. TV01WS00100 TV02WS00100 TV03WS00100 Tape & reel 5.15 (.202) 1.30 (.051) PACKAGING 2.10 (.082) 1 2 3 1.30 (.051) 5.55 (.218) ELECTRICAL SPECIFICATIONS Forward voltage: Red; 3.0 volts at 10 milliamps (2V typical) Green; 3.0 volts at 20 milliamps (2.2V typical) Yellow; 3.0 volts at 10 milliamps (2.1V typical) Reverse voltage: 5.0 volts minimum Viewing angle (total): 90 Wavelength: Red; 635 nm Green; 565 nm Yellow; 585 nm 10.16 (.400) SWITCH ACTION 1.80 (.070) 9.45 (.372) 3.81 (.150) 7.96 (.313) 3 2 1 6.90 (.271) 4.20 (.165) 2.10 (.082) 0.50 (.019) 0.80DIA (.031 DIA) 3.80 (.149) 0.65 (.025) 4.60DIA (.181 DIA) 5.00DIA (.196 DIA) ON ON MOM MOM MOM I 5.15 (.202) CIRCUIT ON ON OFF MOM OFF ON OFF ON III II II 24" 24 10.16 (.400) MODEL NO. TL36WS84065 TL39WS84065 TL37WS84065 TL38WS84065 TL32WS84065 Handle position: 5.50 (.216) I 3.05 (.120) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.50 (.216) I 0.80 (.031) 5.08 (.200) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A5 TL SERIES - SMT WASHABLE TINY TOGGLE SWITCHES A REFLOW SOLDERING - STANDARD PROFILE a. pre-heat to a maximum of 200C for 30 seconds b. reflow at a maximum of 245C for 10 seconds c. final cleaning P.C. board TEMPERATURE/TIME PROFILE (typical) Solder paste application C 240 C 240 200 Component placement 170 C 150 C 60 s 100 Reflow soldering 0 0 60 pre-heating 180 120 drying stabilization reflow peak 240 gradual cooling t (s) Final cleaning P.C. BOARD REWORK RECOMMENDATIONS Hot air reflow technique is preferred. Avoid the use of a soldering iron. Caution: Excessive and/or repeated high temperature exposure may affect switch performance & reliability. A6 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PROCESSING STEPS The printed circuit board, carried by a conveyor belt, travels through the reflow soldering oven and experiences the following programmed cycles: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE TL SERIES - WASHABLE TINY TOGGLE SWITCHES, P.C. MOUNTING A FEATURES Wave solderable. Fully sealed for process compatibility. Ultra-compact case size. Case color options - blue or black. SPDT & DPDT models. Models with electrostatic discharge protection. SPECIFICATIONS Contact ratings (resistive loads): Minimum load: Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Washing: Gold plated brass; 0.4 Volt-Amps max. at 20 V max. Silver plated brass; 0.5 Amps at 48 V max. 10 mA at 50 mV - 10A at 5 VDC 20 milliohms maximum 1000 megohms minimum at 500 VDC 1000 V rms minimum between terminals and frame. 500 V rms between terminals.. 2 position switches - 60,000 cycles minimum. 3 position switches - 30,000 cycles minimum. -30C to +85C Permissible with water, detergents and freons. MATERIALS Contacts & Terminals: Actuator: Bracket: Case: Terminal seal: Gold or silver plated brass Nickel plated brass Tin plated steel PBT Epoxy ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Option drawings & special options APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A7 TL SERIES - WASHABLE TINY TOGGLE SWITCHES, P.C. MOUNTING Straight p.c. terminals - gold plated brass contacts III I 1.10 DIA (.043 DIA) 0.50 (.019) 5.08 (.200) 9.10 (.358) 8.10 (.318) 5.00 (.196) SP 2.54 (.100) DP Straight p.c. terminals - mounting bracket - gold plated brass contacts III II ON ON MOM MOM MOM I 2-1 4-5 5.00DIA (.196 DIA) 2.54 (.100) 4.20 (.165) APEM 1.10 DIA (.043 DIA) 10.16 (.400) 1 2 3 0.50 (.019) 0.40 (.015) 0.70 (.027) 5.08 (.200) 2.54 (.100) 2.54 (.100) 9.10 (.358) 10.16 (.400) 5.00 (.196) 5.08 (.200) OFF OFF OFF II 1.00 (.039) ON ON MOM ON ON III 2-3 5-6 1.10 DIA (.043 DIA) 10.16 (.400) 3.80 (.149) 4.60 DIA (.181 DIA) 5.70 (.224) TL36Y000050 TL46Y000050 TL39Y000050 TL49Y000050 TL37Y000050 TL47Y000050 TL38Y000050 TL48Y000050 TL32Y000050 TL42Y000050 Handle position (see dwg.) : Terminals connected: SP & DP DP I 24 CIRCUIT 8.60 (.338) SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. 5.30 (.208) 2.50 DIA (.098 DIA) SP DP Horizontal right angle terminals - gold plated brass contacts 9.60 (.377) 2.5 DIA (0.98 DIA) 1.10 DIA (.043 DIA) 4.60 DIA (.181 DIA) 2.54 (.100) 5.00 DIA 4.20 (.196 DIA) (.165) 3.30 (.129) 3.30 (.129) 2.54 (.100) 5.45 (.214) 8.10 (.318) 2.54 (.100) 2.54 (.100) 3 2 1 0.50 (.019) 5.08 (.200) 5.08 (.200) 0.70 (.027) ON ON MOM MOM MOM I 2-1 4-5 5.30 (.208) OFF OFF OFF II 3.50 (.137) CIRCUIT ON ON MOM ON ON III 2-3 5-6 III 9.20 (.362) TL36W000050 TL46W000050 TL39W000050 TL49W000050 TL37W000050 TL47W000050 TL38W000050 TL48W000050 TL32W000050 TL42W000050 Handle position (see dwg.) : Terminals connected: SP & DP DP 3.80 (.149) 5.08 (.200) SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. II 24 5.08 (.200) I DP 1.10 DIA (.043 DIA) SP Vertical right angle terminals - gold plated brass contacts 5.08 (.200) 9.10 (.358) DP A8 1 2 8.65 (.340) 5.08 (.200) 3 3.30 (.129) 2.54 (.100) 4.20 (.165) 5.08 (.200) 5.00 DIA (.196 DIA) 1.10 DIA (.043 DIA) 5.08 (.200) ON ON MOM MOM MOM I 2-1 4-5 9.20 5.30 (.362) (.208) OFF OFF OFF II 5.08 (.200) 4.60 DIA (.181 DIA) CIRCUIT ON ON MOM ON ON III 2-3 5-6 2.5 DIA (.098 DIA) 3.50 (.137) TL36WW00050 TL46WW00050 TL39WW00050 TL49WW00050 TL37WW00050 TL47WW00050 TL38WW00050 TL48WW00050 TL32WW00050 TL42WW00050 Handle position (see dwg.) : Terminals connected: SP & DP DP III 0.50 (.019) SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. II 24 2.54 (.100) I 3.80 (.149) 0.70 (.027) 5.00 (.196) 5.08 (.200) 5.08 (.200) 1.10 DIA (.043 DIA) SP APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE APEM 2.54 1 2 3 (.100) 0.70 (.027) 2.54 (.100) 4.20 (.165) 5.00 DIA (.196 DIA) 5.08 (.200) ON ON MOM MOM MOM I 2-1 4-5 1.00 (.039) OFF OFF OFF II 6.10 (.240) ON ON MOM ON ON III 2-3 5-6 1.10 DIA (.043 DIA) 3.80 (.149) 4.60 DIA (.181 DIA) 8.10 (.318) TL36P000000 TL46P000000 TL39P000000 TL49P000000 TL37P000000 TL47P000000 TL38P000000 TL48P000000 TL32P000000 TL42P000000 Handle position (see dwg.) : Terminals connected: SP & DP DP II 24 CIRCUIT 3.30 (.129) SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. 5.30 (.208) 2.50 DIA (.098 DIA) 3.30 (.129) A TL SERIES - WASHABLE TINY TOGGLE SWITCHES, P.C. MOUNTING A Wire-wrap terminals - gold plated brass contacts III II I 4.60 DIA (.181 DIA) 5.00 DIA (.196 DIA) APEM 1 2 3 4 5 6 5.00 (.196) 2.54 (.100) 4.20 (.165) 1.00 (.039) 1 4 1.10 DIA (.043 DIA) 0.50 (.019) 9.10 (.358) 8.10 (.318) 0.70 (.027) 5.08 (.200) ON ON MOM MOM MOM I 2-1 4-5 6.10 (.240) OFF OFF OFF II 8.10 (.318) ON ON MOM ON ON III 2-3 5-6 1.10 DIA (.043 DIA) 3.80 (.149) 24 CIRCUIT 15.20 (.598) TL36MW00000 TL46MW00000 TL39MW00000 TL49MW00000 TL37MW00000 TL47MW00000 TL38MW00000 TL48MW00000 TL32MW00000 TL42MW00000 Handle position (see dwg.) : Terminals connected: SP & DP DP 5.08 (.200) 2.54 (.100) 2.54 (.100) DP SP Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. ( Allowable options are shown below each respective box). Model Structure: Series T Number of poles Electrical functions Terminals L 3 4 Single pole Double pole 6 ON - ON 9 7 8 2 ON MOM ON ON OFF OFF OFF - ON MOM MOM MOM P 0 Y 0 W 0 Straight p.c. Straight p.c.with bracket Horizontal right angle W W M W Vertical right angle Wire-wrap Options: Contact & terminal mat'ls. 0 1 3 8 9 Actuators & case colors Brass, gold plated Brass, silver plated Brass, gold plated - (1.27 microns gold) Brass, gold plated contacts with tin plated terminals Contacts brass, gold plated - (1.27 microns gold) and tin plated terminals Special options Specify 00, 01, 02, 03, 04, 05, 30, 40, 50, 51, 52, 53, 54, 55, 56, 90, or 94 See drawings below with specifications and dimensions. 0 5 0 0 No special requirement Crimped bracket terminals specify for models with brackets See additional listings on following page. Example of completely specified model number: TL36W015150 OPTION DRAWINGS Brass actuators & case colors 2.50 DIA (.098 DIA) 4.60 DIA (.181 DIA) 3.80 (.149) 4.20 (.165) 5.00 DIA (.196 DIA) 4.20 (.165) Short (standard) Blue case Black case 00 50 01 51 9.40 (.370) 3.80 (0149) nickel plated matte black 24 24 4.60 DIA (.181 DIA) 6.10 (.240) 5.30 (.208) 2.50 DIA (.098 DIA) 6.10 (.240) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. 5.30 (.208) 2.50 DIA (.098 DIA) 5.00 DIA (.196 DIA) Long nickel plated matte black Blue case Black case 02 52 03 53 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A9 TL SERIES - WASHABLE TINY TOGGLE SWITCHES, P.C. MOUNTING Brass actuators & case colors (cont'd.) 4.20 (.165) 4.60 DIA (.181 DIA) 3.80 (.149) 4.60 DIA (.181 DIA) 5.00 DIA (.196 DIA) 4.20 (.165) 5.00 DIA (.196 DIA) Cylindrical Medium nickel plated matte black 24 Blue case Black case 04 54 05 55 nickel plated Black case 56 Black plastic insulative actuators & case colors (protects against electrostatic discharges (ESD) up to 10 KV) 2.50 DIA (.098 DIA) 24 24 3.80 (.149) 4.60 DIA (.181 DIA) 3.80 (.149) 4.20 (.165) 5.00 DIA (.196 DIA) 4.20 (.165) 4.60 DIA (.181 DIA) 6.10 7.60 (.240) (.299) 5.50 (.216) 2.50 DIA (.098 DIA) 5.00 DIA (.196 DIA) Short Long Blue case Black case 40 94 Blue case Black case 30 90 SPECIAL OPTIONS 00 No special requirement 07 Trimmed terminals for WW models only - .125" (3.2mm). 08 Extended terminals for W0 models only. 18 WW models without mounting bracket. 20 Mounting bracket for WW models with p.c. board spacer tab. 25 Trimmed terminals for all models except WW - .196" (5mm). 30 Wire-wrap terminals on models with Y bracket. 50 Crimped bracket terminals (retains switch on p.c. board 12.50 (.492) 3.20 (.125) 07 08 5.00 5.00 (.196) (.196) during assembly and soldering). For models with W0, WW & Y0 terminals. 18 15.20 (.598) 2.54 (.100) 10.16 (.400) 10.16 (.400) 5.08 (.200) 2.70 (.106) 1.10 DIA (.043 DIA) 20 A10 25 30 50 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 7.40 6.10 (.240) (.291) 3.80 (.149) 6.50 (.255) 1.60 DIA (.062 DIA) 24 6.10 (.240) 2.50 DIA (.098 DIA) 6.10 (.240) A SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ! New ZL SERIES - TINY TOGGLE SWITCHES, PANEL & P.C. MTG. A FEATURES Metal bushing, threaded with flat or keyway, or plain. Wave solderable. Ultra-compact case size. SPDT models with epoxy sealed terminals. SPECIFICATIONS Contact ratings (resistive loads): Minimum load: Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Moisture resistance: Torque: Panel thickness (max.): Hardware: Gold plated brass; 0.4 Volt-Amps max. at 20 V max. Silver plated brass; 0.5 Amps at 48 V max. 10 mA at 50 mV - 10A at 5 VDC 20 milliohms maximum 1000 megohms minimum at 500 VDC 1000 V rms minimum between terminals and frame. 500 V rms between terminals.. Gold contacts: 2 position - 60,000 cycles min. - 3 position - 30,000 cycles min. Silver contacts: 2 position - 20,000 cycles min. - 3 position - 10,000 cycles min. -30C to +85C 21 days 95% (NFC 20-603 - IEC 8-2-3) 1Nm (0.96 ft-lbs) max. applied between 2 nuts 1.5mm (.059") with 2 nuts - 3mm (.118") with 1 nut Threaded models supplied with 2 hex nuts 7mm (.275") across flats, 1 locking ring and 1 lockwasher. See hardware section of catalog. MATERIALS Contacts & Terminals: Actuator: Bushing: Bracket: Case: Terminal seal: Gold or silver plated brass Nickel plated brass Tin plated zamac Tin plated steel UL94-VO thermoplastic Epoxy ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Option drawings APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A11 ! New ZL SERIES - TINY TOGGLE SWITCHES, PANEL & P.C. MTG. Solder lug terminals - silver contacts - threaded bushing MODEL NO. CIRCUIT ZL31S0102 ZL36S0102 ZL39S0102 ZL37S0102 ZL38S0102 ZL32S0102 Handle position (see dwg.) : ON ON ON MOM ON ON OFF OFF OFF - OFF ON ON MOM MOM MOM III II I Straight p.c. terminals - gold contacts - threaded bushing MODEL NO. CIRCUIT ZL31P0002 ZL36P0002 ZL39P0002 ZL37P0002 ZL38P0002 ZL32P0002 Handle position (see dwg.) : ON ON ON MOM ON ON OFF OFF OFF - OFF ON ON MOM MOM MOM III II I 15.20mm (.598") wire-wrap terminals also available - to specify substitute MW for P0 in above model numbers. Straight p.c. terminals - mtg. bracket - gold contacts - plain bushing MODEL NO. CIRCUIT ZL31Y0000 ZL36Y0000 ZL39Y0000 ZL37Y0000 ZL38Y0000 ZL32Y0000 Handle position (see dwg.) : ON ON ON MOM ON ON OFF OFF OFF - OFF ON ON MOM MOM MOM III II I Horizontal right angle terminals - gold contacts - plain bushing A12 MODEL NO. CIRCUIT ZL31W0000 ZL36W0000 ZL39W0000 ZL37W0000 ZL38W0000 ZL32W0000 Handle position (see dwg.) : ON ON ON MOM ON ON OFF OFF OFF - OFF ON ON MOM MOM MOM III II I APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE A ! New ZL SERIES - TINY TOGGLE SWITCHES, PANEL & P.C. MTG. A SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Vertical right angle terminals - gold contacts - plain bushing MODEL NO. CIRCUIT ZL31WW000 ZL36WW000 ZL39WW000 ZLS7WW000 ZL38WW000 ZL32WW000 Handle position (see dwg.) : ON ON ON MOM ON ON OFF OFF OFF - OFF ON ON MOM MOM MOM III II I Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for complete model number. ( Allowable options are shown below each respective box). Series Z Single pole L Electrical functions Terminals Contact & terminal mat'ls. Bushings 3 1 6 ON ON - OFF ON 9 7 8 2 ON MOM ON ON OFF OFF OFF - ON MOM MOM MOM S P Y 0 0 0 W 0 W W M W Solder lug Straight p.c. Straight p.c. with bracket Horizontal right angle Vertical right angle Wire-wrap 0 1 3 Brass, gold plated Brass, silver plated Brass, gold plated (1.27 microns gold) 0 0 0 1 0 2 Plain Threaded with flat Threaded with keyway Example of completely specified model number: ZL36S0302 Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. BUSHINGS 00 Plain, with flat (for models YO, WO and WW) 01 Threaded, with flat (for models P0 and S0) TERMINALS Solder lug 02 Threaded, with keyway (for models P0 and S0) CROSS SECTIONS Printed circuit Function 1 1 3 Other functions 1 2 3 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A13 ! 21000N SERIES - MINIATURE TOGGLE SWITCHES FEATURES SPDT & DPDT models with uniform low profile height for p.c. mounting. Threaded or plain bushing with mounting bracket. Epoxy terminal sealing standard on all models. Straight p.c. terminals designed for wave soldering. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive): Operating temperature range: 2 Amps at 250 VAC, 4 Amps at 125 VAC or 4 Amps at 30 VDC 20 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 2000 V rms min. - between poles and terminals and frame 20,000 cycles minimum -40C to +85C MATERIALS Contacts & Terminals: Actuator: Bushing: Case & Cover: Terminal seal: Hardware: Silver Chrome plated brass Nickel plated brass PBT Epoxy Panel mounting models supplied with 2 Hex Nuts .314" (8mm) across flats (See hardware section of catalog). POSITIONS AND CONNECTIONS VIEWED FROM BOTTOM OF SWITCH CIRCUIT ON ON ON OFF ON MOM OFF MOM Consult factory for other circuits. PRINTED CIRCUIT BOARD MOUNTING A14 PANEL CUT-OUT APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE New A New ! 21000N SERIES - MINIATURE TOGGLE SWITCHES A SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Threaded bushing - single pole MODEL NO. 21136NA 21139NA 21137NA Handle position (see dwg.) : Terminals conn. CIRCUIT ON ON ON OFF ON MOM OFF ON III 2-3 II I 1-2 Consult factory for other configurations. Threaded bushing - double pole MODEL NO. 21146NA 21149NA 21147NA Handle position (see dwg.) : Terminals conn. CIRCUIT ON ON ON OFF ON MOM OFF ON III 2-3 5-6 II I 1-2 4-6 Consult factory for other configurations. Plain bushing - single pole MODEL NO. 21236NA 21239NA 21237NA Handle position (see dwg.) : Terminals conn. CIRCUIT ON ON ON OFF ON MOM OFF ON III 2-3 II I 1-2 Consult factory for other configurations. Plain bushing - double pole MODEL NO. 21246NA 21249NA 21247NA Handle position (see dwg.) : Terminals conn. CIRCUIT ON ON ON OFF ON MOM OFF ON III 2-3 5-6 II I 1-2 4-6 Consult factory for other configurations. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A15 FEATURES Wave solderable. Fully sealed for process compatibility. SPDT & DPDT models. Compact case size with ESD protection options. Agency recognition (see below). SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Washing: Gold plated brass; 0.4 Volt-Amps max. at 20 V max. Silver; 2 Amps at 250 VAC, 5 Amps at 125 VAC or 4 Amps at 30 VDC. Gold plated silver; 2 Amps at 250 VAC, 5 Amps at 125 VAC or 4 Amps at 30 VDC. Gold plating withstands up to 300 mA at 30 VDC. 10 milliohms maximum 1000 megohms minimum 1000 V rms minimum Gold: 2 positions - 100,000 cycles min. 3 positions - 50,000 cycles min. Silver: 40,000 cycles minimum. -20C to +85C Permissible with water, detergents and freons. MATERIALS Contacts & Terminals: Actuator: Bracket: Case: Terminal seal: Gold plated brass, silver or gold plated silver Chrome plated brass Tin plated steel UL94V-0 - Polyamide, glass filled or PES Epoxy AGENCY RECOGNITION UL, CECC, GAM T1 (military) Availability: consult factory for details of recognized models. Marking: to order switches marked UL or CECC, complete the appropriate box of the ordering format. GAM T1 listing does not appear on the switches. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Option drawings & special options d. Miscellaneous A16 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE S SERIES - WASHABLE MINIATURE TOGGLE SWITCHES, P.C. MOUNTING A S SERIES - WASHABLE MINIATURE TOGGLE SWITCHES, P.C. MOUNTING Horizontal right angle terminals - .185" spacing - gold plated brass contacts 12.70 (.500) 0.80 (.031) 3.81 (.150) 0.50 (.019) 11.65 (.458) 5.08 (.200) EPOXY 6.90 (.271) 3.90 (.153) 4.70 (.185) 12.70 (.500) 1 4.70 (.185) 3.81 (.150) 2 1.10 (.043) 3 1.10 (.043) 12.70 (.500) 6.10 (.240) 7.50 (.295) 1.60 DIA (.062 DIA) 12.70 (.500) * Function 4: SP in DP case - see diagram at end of section. 4.70 (.185) 20 6.20 DIA (.244 DIA) 0.40 (.015) ON ON MOM MOM MOM ON I 2-1 4-5 2.70 DIA (.106 DIA) SP DP Horizontal right angle terminals - .200" spacing - gold plated brass contacts 5.08 (.200) 6.10 (.240) 3 2 1 0.60 (.023) 3.81 (.150) 0.60 (.023) * Function 4: SP in DP case - see diagram at end of section. EPOXY 6.90 (.271) 3.90 (.153) 5.08 (.200) 11.65 (.458) 5.08 (.200) 12.70 (.500) 12.70 (.500) 12.70 (.500) 1.10 DIA (.043 DIA) 0.60 (.023) 0.40 (.015) 6.20 DIA (.244 DIA) 12.70 (.500) 5.08 (.200) 20 5.08 (.200) 3.81 (.150) 5.30 (.208) ON ON MOM MOM MOM ON I 2-1 4-5 0.60 (.023) OFF OFF OFF ON II 2.70 DIA (.106 DIA) 7.50 (.295) CIRCUIT ON ON MOM ON ON ON III 2-3 5-6 I SW036CD7 SW046CD7 SW039CD7 SW049CD7 SW037CD7 SW047CD7 SW038CD7 SW048CD7 SW032CD7 SW042CD7 SW044THCD7* Handle position (see dwg.) : Terminals connected: SP & DP DP II SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. III SP DP Vertical right angle terminals - gold plated brass contacts 1.10 (.043) 1.60 DIA (.062 DIA) 5.08 (.200) 12.70 (.500) 2 3 EPOXY 11.35 (.446) 3.81 (.150) 1 6.60 (.259) 3.81 (.150) 12.70 (.500) 6.20 DIA (.244 DIA) 0.50 (.019) ON ON MOM MOM MOM ON I 2-1 4-5 0.80 (.039) OFF OFF OFF ON II 6.10 7.50 (.240) (.295) CIRCUIT ON ON MOM ON ON ON III 2-3 5-6 5.08 (.200) 12.70 (.500) 5.30 (.208) 20 4.75 (.187) 3.10 (.122) 13.00 (.511) 3.81 (.150) III SWW236CD7 SWW246CD7 SWW239CD7 SWW249CD7 SWW237CD7 SWW247CD7 SWW238CD7 SWW248CD7 SWW232CD7 SWW242CD7 SWW244THCD7* Handle position (see dwg.) : Terminals connected: SP & DP DP II 2.70 DIA (.106 DIA) SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. I 4.75 (.187) * Function 4: SP in DP case - see diagram at end of section. DP SP Straight p.c. terminals - mounting bracket - gold plated brass contacts I EPOXY 3 1.17 (.046) 3.18 (.125) 2 1 4.70 (.185) 4.70 (.185) 1.60 DIA (.062 DIA) 0.40 (.015) 8.10 (.318) 15.75 (.620) 4.70 (.185) 11.35 (.446) 15.75 (.620) 6.20 DIA (.244) 15.75 (.620) 5.90 (.232) ON ON MOM MOM MOM ON I 2-1 4-5 11.70 (.460) OFF OFF OFF ON II 7.50 (.295) ON ON MOM ON ON ON III 2-3 5-6 3.18 (.125) 2.70 DIA (.106 DIA) 20 CIRCUIT 4.70 (.185) SY236CD7 SY246CD7 SY239CD7 SY249CD7 SY237CD7 SY247CD7 SY238CD7 SY248CD7 SY232CD7 SY242CD7 SY244THCD7* Handle position (see dwg.) : Terminals connected: SP & DP DP 5.30 (.208) II SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. III SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE OFF OFF OFF ON II I ON ON MOM ON ON ON III 2-3 5-6 5.30 (.208) II SW236CD7 SW246CD7 SW239CD7 SW249CD7 SW237CD7 SW247CD7 SW238CD7 SW248CD7 SW232CD7 SW242CD7 SW244THCD7* Handle position (see dwg.) : Terminals connected: SP & DP DP CIRCUIT 5.08 (.200) III SINGLE POLE DOUBLE POLE MODEL NO. MODEL NO. A 4.75 (.187) * Function 4: SP in DP case - see diagram at end of section. DP SP APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A17 S SERIES - WASHABLE MINIATURE TOGGLE SWITCHES, P.C. MOUNTING A Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note: 'NONE' indicates box may be left empty. Model Structure: Series Terminals Bushing & terminals Number of poles Electrical functions S W horizontal rt. angle mtg. W W vertical rt. angle mtg. Y Bracket mtg. 2 Terminal spacing .185" (4,7mm) or .150" (3,81mm) 0 Terminal spacing .200" (5,08mm) (SY & SW models) All models have plain bushing 3 4 Single pole Double pole 6 9 7 8 2 4 ON T ON MOM ON ON H ON - ON OFF OFF OFF ON ON MOM MOM MOM ON Options: Contact materials A Silver A D Silver, gold plated C D Brass, gold plated Actuators 7 1 3 Agency recognition Short (standard) Long Insulated actuators: 1 1 Long 8 Short (NONE) U L C E C C Consult factory for availability. Special options (NONE) F X 6 0 1 X 6 9 6 Examples of completely specified model numbers: Tin plated terminals Silver plated brass contacts Longer bushing (for insulated actuators) SW236CD7, SW244THAD11ULX696 Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. OPTION DRAWINGS ACTUATORS 3.00 DIA (.118 DIA) INSULATED Protects against electrostatic discharges (ESD) up to 12 KV. Color: black Note: must be ordered with option X696. 2.90 DIA (.114 DIA) 7.50 (.295) 6.80 (.267) 7.50 (.295) 13.00 (.511) 2.90 DIA (.114 DIA) 6.30 (.248) 13.30 (.523) 6.30 (.248) 2.70 (.106) 7.50 (.295) CHROME PLATED BRASS 7 Standard 13 Long 8 Short 11 Long SPECIAL OPTIONS F X601 Tin plated terminals. Silver plated brass contacts. Lower rating. Minimum quantity: 5000 pcs. X696 Longer bushing - .295" (7.5mm). Specify for actuators 8 and 11. A18 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT S SERIES - WASHABLE MINIATURE TOGGLE SWITCHES, P.C. MOUNTING A OPTION DRAWINGS & MISCELLANEOUS 1 2 3 4 5 6 7/1 9 11.00 (.433) 3.50 (.137 DIA) 3.50 (.137 DIA) 7.30 (.287) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE INSULATING CAPS (replace '0' in part numbers with color code) U270 For actuator 13 blue black green grey yellow red white orange U1710 For actuator 7 WIRING for function 4 switch 6 6 6 5 III 4 5 II 5 I 4 4 S.4 I E 3 6 9 12 3 6 9 12 3 6 9 12 2 5 8 11 2 5 8 11 2 5 8 11 1 4 7 10 1 4 7 10 1 4 7 10 5 S.1 II S.3 III S.10I TH E 11 S.7 II S.9 III Above diagrams are viewed from bottom of switch. Equivalent to single pole 3 throw switch. Dotted lines between terminals 2 & 6 and 8 & 12 indicate external jumpers to be added by customer APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A19 FEATURES Insulated threaded bushing. Fully sealed for process compatibility. SPDT models. Compact case size with ESD protection options. Agency recognition (see below). SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Washing: Gold plated brass; 0.4 Volt-Amps max. at 20 V max. Silver; 2 Amps at 250 VAC, 5 Amps at 125 VAC or 4 Amps at 30 VDC. Gold plated silver; 2 Amps at 250 VAC, 5 Amps at 125 VAC or 4 Amps at 30 VDC. Gold plating withstands up to 300 mA at 30 VDC. 10 milliohms maximum 1000 megohms minimum 1000 V rms minimum Gold: 2 positions - 100,000 cycles min. 3 positions - 50,000 cycles min. Silver: 40,000 cycles minimum. -20C to +85C Permissible with water, detergents and freons. MATERIALS Contacts & Terminals: Actuator: Bracket: Case: Terminal seal: Hardware: Gold plated brass, silver or gold plated silver Chrome plated brass Tin plated steel UL94V-0 - Polyamide, glass filled or PES Epoxy Supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. AGENCY RECOGNITION UL, CECC, GAM T1 (military) Availability: consult factory for details of recognized models. Marking: to order switches marked UL or CECC, complete the appropriate box of the ordering format. GAM T1 listing does not appear on the switches. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Option drawings d. Miscellaneous A20 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SF SERIES - WASHABLE MINIATURE TOGGLE SWITCHES, PANEL MTG. A SF SERIES - WASHABLE MINIATURE TOGGLE SWITCHES, PANEL MTG. Solder lug terminals - silver contacts III II I 3.00 DIA (.118 DIA) CIRCUIT 8.90 (.350) ON ON MOM MOM MOM I 2-1 12.70 (.500) 6.60 (.259) 10.80 (.425) OFF OFF OFF II 1 2 3 0.80 (.031) EPOXY 1.80 (.070) 2.45 (.096) ON ON MOM ON ON III 2-3 6.35 DIA-40UNS (1/4 40UNS) 0.50 (.019) 4.70 (.185) III II 20 SINGLE POLE MODEL NO. 3.00 DIA (.118 DIA) 6.35 DIA-40UNS (1/4 40UNS) ON ON MOM MOM MOM I 2-1 12.70 (.500) 6.60 (.259) 1 2 0.80 (.031) 3 EPOXY 0.50 (.019) 1.10 (.043) 4.70 (.185) 1.60 DIA (.062) 4.70 (.185) OFF OFF OFF II 8.90 (.350) CIRCUIT ON ON MOM ON ON III 2-3 10.80 (.425) SF36P0000 SF39P0000 SF37P0000 SF38P0000 SF32P0000 Handle pos. (see dwg.) : Terminals connected: I 10.70 (.421) Straight p.c. terminals - gold plated brass contacts 4.15 (.163) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SF36S0100 SF39S0100 SF37S0100 SF38S0100 SF32S0100 Handle pos. (see dwg.) : Terminals connected: 10.70 (.421) 20 SINGLE POLE MODEL NO. A Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Model Structure: Series S Number of poles Electrical functions Terminals 3 F Single pole 6 ON - ON S 0 Solder lug terminals 9 7 8 2 ON MOM ON ON OFF OFF OFF - ON MOM MOM MOM P 0 Straight p.c. terminals Options: Contact & terminal materials Actuators Model 0 0 1 2 5 8 Brass, gold plated Silver Silver, gold plated Special contact, lower rating Brass, gold plated contacts with tin plated terminals 0 0 0 1 Long (standard) Short Insulated actuators: 0 8 Short 1 1 Long Insulating Cap 0 Standard 1 0* * - Specify color - see next page Example of completely specified model number: SF37S01000012 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A21 SF SERIES - WASHABLE MINIATURE TOGGLE SWITCHES, PANEL MTG. A OPTION DRAWINGS & MISCELLANEOUS ACTUATORS Chrome plated brass 01 Short 08 Short 11 Long INSULATING CAPS (replace '0' in part numbers with color code) For actuator 00 only 11.00 (.433) 1 2 3 4 5 6 7/1 9 3.5 DIA (.137 DIA) blue black green grey yellow red white orange 10 U270 If ordered separately MISCELLANEOUS Keyway 1.90 (.070) Solder lug terminal A22 2.20 DIA (.086 DIA) 4.15 (.163) 1.10 (.043) 1.90 (.074) 2.45 (.096) 6.50 DIA (.255 DIA) 1.10 (.043) P.C. terminal 5.20 (.204) Panel Cut-out 1 2 Switch Action 3 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 7.50 (.295) 6.80 (.267) 8.90 (.350) 7.50 (.295) 10.70 (.421) 8.90 (.350) 00 Standard 2.90 DIA (.114 DIA) 2.90 DIA (.114 DIA) 4.90 (.192) 2.70 DIA (.106 DIA) 13.00 (.511) 3.00 DIA (.118 DIA) INSULATED LEVERS Insulates against electrostatic discharges (ESD) up to 12 KV. Color: black SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5000 SERIES - MINIATURE TOGGLE SWITCHES A FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, 3PDT & 4PDT models with numerous options. Numerous configurations for panel, panel & p.c. and p.c. mounting. Extensive agency recognition (see below). SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Gold plated brass; 0.4 Volt-Amps max. at 20 V max. Silver; 3 Amps at 250 VAC, 6 Amps at 125 VAC or 4 Amps at 30 VDC Gold plated silver; 3 Amps at 250 VAC, 6 Amps at 125 VAC or 4 Amps at 30 VDC. Gold plating withstands up to 100 mA at 30 VDC. 10 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 1500 V rms min. - between poles and terminals and frame Gold: 100,000 cycles min. Silver (at full load): SP & DP - 50,000 cycles min. 3P: 40,000 cycles min. 4P: 30,000 cycles min. -40C to +85C MATERIALS Contacts & Terminals: Actuator: Bushing: Housing: Case: Terminal seal: Hardware: Gold plated brass, silver or gold plated silver Chrome plated brass Nickel plated brass Stainless steel or tin plated steel Diallyl phthalate (DAP) Epoxy Panel mounting models supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. AGENCY RECOGNITION UL, CSA, CECC, LNZ, GAM T1, QPL (Europe), MUAHAG, NATO. Availability: Consult factory for details of recognized models. Marking: To order switches marked UL, CSA or CECC, complete the appropriate box of the ordering format. Other listings do not appear on the switches. ABOUT THIS SERIES ALSO IN THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models: Panel mounting Panel and/or p.c. mounting P.C. mounting b. 'build your own switch' order format c. Option drawings & special options d. Panel cut-outs & miscellaneous 5000 Series switches for peak currents for switching power supplies, DC-DC converters, motors, etc. See specifications on last page of completely specified models. VDE approved 5000 Series models see 55000 Series following. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A23 5000 SERIES - MINIATURE TOGGLE SWITCHES A III 2-3 II I 1-2 EPOXY 7.00 (.275) 1.00 (.039) 12.00 (.472) 3.70 (.145) I 3 24 II 2 III 1 0.80 (.031) 10.50 8.00 (.413) (.314) III 2-3 5-6 II I 1-2 4-5 EPOXY 12.00 (.472) 3.70 (.145) 12.00 (.472) 1.00 (.039) II 24 I III * Function 4: SP in DP case. see diagram at end of section 6 2 5 1 4 0.80 (.031) 10.50 8.00 (.413) (.314) 3 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM 4.75 (.187) OFF OFF OFF ON ON ON 1.80 (.070) ON ON MOM ON ON ON ON MOM 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 5646AB 5649AB 5647AB 5648AB 5642AB 5644THAB* 5644TH1RAB* 5644TH2RAB* Handle position (see dwg.) : Terminals connected: Keyway CIRCUIT 0.50 (.019) MODEL NO. 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts III 2-3 5-6 8-9 II I 1-2 4-5 7-8 1.80 (.070) EPOXY 16.50 (.649) 1.00 (.039) 13.10 (.516) 3.70 (.145) I II III 9 2 8 1 7 0.80 (.031) 10.50 8.00 (.413) (.314) 3 4.70 (.185) ON ON MOM MOM MOM 4.75 (.187) OFF OFF OFF - 0.50 (.019) ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 24 5656AB 5659AB 5657AB 5658AB 5652AB Handle position (see dwg.) : Terminals connected: Keyway CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Three pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts A24 1.80 (.070) 4.75 (.187) 6.35 DIA-40UNS (1/4-40UNS) EPOXY I II 3.70 (.145) III 10.50 8.00 (.413) (.314) 9 12 8 11 7 10 4.70 (.185) 1.00 (.039) 13.10 (.516) 0.50 (.019) Keyway 0.80 (.031) CIRCUIT ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON MOM ON ON ON ON ON MOM 21.20 (.834) MOM ON MOM III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 * Function 4: SP in DP case. see diagram at end of section. 13.20 (.519) 5666AB 5669AB 5667AB 5668AB 5662AB 5664THAB* 5664TH1RAB* 5664TH2RAB* Handle position Terminals connected: 24 MODEL NO. 3.00 DIA (.118 DIA) Four pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals -silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ON ON MOM MOM MOM 4.70 (.185) OFF OFF OFF - 1.80 (.070) ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 5636AB 5639AB 5637AB 5638AB 5632AB Handle position (see dwg.) : Terminals connected Keyway CIRCUIT 0.50 (.019) MODEL NO. 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts 5000 SERIES - MINIATURE TOGGLE SWITCHES A II I 8.00 (.314) 11.40 (.448) 7.00 (.275) 1.00 (.039) 1-2 Epoxy 12.00 (.472) I 13.20 (.519) 3.70 (.145) II 3 2 III 0.80 (.031) 2.54 (.100) 1 4.70 (.185) ON ON MOM MOM MOM 0.50 (.019) OFF OFF OFF - 24 5636AB9 ON 5639AB9 ON 5637AB9 MOM 5638AB9 ON 5632AB9 ON Handle position (see dwg.) : III Terminals connected 2-3 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) Keyway CIRCUIT 12.00 (.472) 1.00 (.039) Epoxy 12.00 (.472) I II 4.75 (.187) 1.80 (.070) 11.40 8.00 (.448) (.314) 3.70 (.145) III * Function 4: SP in DP case. see diagram at end of section. 3 6 2 5 1 4 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 0.50 (.019) OFF OFF OFF ON ON ON II 0.80 (.031) ON ON MOM ON ON ON ON MOM III 2-3 5-6 6.35 DIA-40UNS (1/4-40UNS) 24 5646AB9 5649AB9 5647AB9 5648AB9 5642AB9 5644THAB9* 5644TH1RAB9* 5644TH2RAB9* Handle position: Terminals connected: Keyway CIRCUIT 2.54 (.100) MODEL NO. 5.00 DIA (.196 DIA) Double pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts 13.20 (.519) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 5.00 DIA (.196 DIA) Single pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts I 1-2 4-5 7-8 16.50 (.649) 1.00 (.039) 1.80 (.070) Epoxy 13.10 (.516) 3.70 (.145) I II III 3 9 2 8 1 7 4.70 (.185) II 4.75 (.187) III 2-3 5-6 8-9 11.40 8.00 (.448) (.314) 0.50 (.019) ON ON MOM MOM MOM 0.80 (.031) OFF OFF OFF - 24 ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 2.54 (.100) 5656AB9 5659AB9 5657AB9 5658AB9 5652AB9 Handle position (see dwg.) : Terminals connected: Keyway CIRCUIT 13.20 (.519) MODEL NO. 5.00 DIA (.196 DIA) Three pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts 4.75 (.187) 6.35 DIA-40UNS (1/4-40UNS) 11.40 8.00 (.448) (.314) 3.70 (.145) 0.50 (.019) 1.00 (.039) I * Function 4: SP in DP case. see diagram at end of section. II III 9 12 8 11 7 10 4.70 (.185) 21.20 (.834) Epoxy 13.10 (.516) 0.80 (.031) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 7-8 10-11 24 OFF OFF OFF ON ON ON II 1.80 (.070) Keyway CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 8-9 11-12 2.54 (.100) 5666AB9 5669AB9 5667AB9 5668AB9 5662AB9 5664THAB9* 5664TH1RAB9* 5664TH2RAB9* Handle position Terminals connected: 13.20 (.519) MODEL NO. 5.00 DIA (.196 DIA) Four pole - flatted actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A25 5000 SERIES - MINIATURE TOGGLE SWITCHES A Single pole - standard actuator - 1/4-40 threaded bushing - quick connect terminals - silver contacts II I 13.10 (.515) 7.00 (.275) 5.30 (.208) 1.00 (.039) 2 II 24 III 1 1-2 3 I 2-3 10.50 (.413) 8.00 (.314) EPOXY 13.10 (.515) 12.00 (.472) 5.30 (.208) 4.70 (.185) 1.00 (.039) III * Function 4: SP in DP case. see diagram at end of section. 3 I 2 II 4.75 (.187) 1.57 (.061) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 10.50 (.413) 1 OFF OFF OFF ON ON ON II 6.35 DIA-40UNS (1/4-40UNS) 8.00 (.314) EPOXY 0.78 (.030) ON ON MOM ON ON ON ON MOM III 2-3 5-6 Keyway 24 5246ZA 5249ZA 5247ZA 5248ZA 5242ZA 5244THZA* 5244TH1RZA* 5244TH2RZA* Handle position Terminals connected: CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 threaded bushing - quick connect terminals - silver contacts 5.00 DIA (.196 DIA) ON ON MOM ON ON OFF OFF OFF - ON ON MOM MOM MOM III II I I 1-2 II Epoxy terminal seal is standard on these models. 11.9 DIA-32UNS (15/32-32UNS) 11.00 (.433) 7.00 (.275) 3.70 (.145) 3 13.20 (.519) 2-3 Keyway 0.50 (.019) 5636MAB 5639MAB 5637MAB 5638MAB 5632MAB Handle position (see dwg.) : Terminals connected: CIRCUIT 24 MODEL NO. 1.80 (.070) Single pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts 2 0.80 (.031) 17.50 (.688) 4.70 (.185) 1 III 11.90 (.468) A26 4.75 (.187) Epoxy terminal seal is standard on these models. 11.9 DIA-32UNS (15/32-32UNS) 11.00 (.433) I II 3.70 (.145) III 17.50 (.688) 11.90 (.468) 12.00 (.472) 3 6 2 5 1 4 4.70 (.185) * Function 4: SP in DP case. see diagram at end of section. Keyway 13.20 (.519) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 0.50 (.019) OFF OFF OFF ON ON ON II 0.80 (.031) ON ON MOM ON ON ON ON MOM III 2-3 5-6 5.00 DIA (.196 DIA) 5646MAB 5649MAB 5647MAB 5648MAB 5642MAB 5644MTHAB* 5644MTH1RAB* 5644MTH2RAB* Handle position Terminals connected: CIRCUIT 24 MODEL NO. 1.80 (.070) Double pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE III 1.57 (.061) ON ON MOM MOM MOM 4.70 (.185) OFF OFF OFF - 6.35 DIA-40UNS (1/4-40UNS) 0.78 (.030) ON ON MOM ON ON 13.20 (.519) 5236ZA 5239ZA 5237ZA 5238ZA 5232ZA Handle position (see dwg.) : Terminals connected: Keyway CIRCUIT 3.00 DIA (.118 DIA) MODEL NO. 5000 SERIES - MINIATURE TOGGLE SWITCHES A I 1-2 4-5 7-8 11.9 DIA-32UNS (15/32-32UNS) 12.10 (.476) 3.70 (.145) I II 16.50 (.649) 17.50 (.688) 9 2 8 1 7 0.80 (.031) III 3 4.70 (.185) II 4.75 (.187) III 2-3 5-6 8-9 Epoxy terminal seal is standard on these models. 13.20 (.519) ON ON MOM MOM MOM 0.50 (.019) OFF OFF OFF - Keyway 24 ON ON MOM ON ON 5.00 DIA (.196 DIA) 5656MAB 5659MAB 5657MAB 5658MAB 5652MAB Handle position (see dwg.) : Terminals connected: CIRCUIT 11.90 (.468) Keyway Epoxy terminal seal is standard on these models. 11.9 DIA-32UNS (15/32-32UNS) 12.10 (.476) 3.70 (.145) I II 21.20 (.834) 13.20 (.519) III 17.50 (.688) 3 12 2 11 1 10 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 7-8 10-11 0.50 (.019) OFF OFF OFF ON ON ON II 4.75 (.187) CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 8-9 11-12 0.80 (.031) 5666MAB 5669MAB 5667MAB 5668MAB 5662MAB 5664MTHAB* 5664MTH1RAB* 5664MTH2RAB* Handle position Terminals connected: 24 MODEL NO. 1.80 (.070) Four pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts 5.00 DIA (.196 DIA) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 1.80 (.070) Three pole - large actuator - 15/32-32 threaded bushing - solder lug terminals - silver contacts 11.90 (.468) * Function 4: SP in DP case. see diagram at end of section. III OFF OFF OFF II ON ON MOM MOM MOM 6.35 DIA-40UNS (1/4-40UNS) 7.00 (.275) 1.80 (.070) Keyway CIRCUIT ON ON MOM ON ON 1.00 (.039) 12.00 (.472) 3.70 (.145) 1-2 II 3 24 I 2-3 Epoxy terminal seal is standard on these models. I 13.20 (.519) 5636AKB 5639AKB 5637AKB 5638AKB 5632AKB Handle position (see dwg.) : Terminals connected: 0.50 (.019) MODEL NO. 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts 2 III 0.80 (.031) 8.00 (.314) 4.70 (.185) 1 10.50 (.413) 12.00 (.472) 1.00 (.039) I II 12.00 (.472) III 10.50 (.413) 8.00 (.314) 4.75 (.187) 3.70 (.145) Epoxy terminal seal is standard on these models. 3 6 2 5 1 4 4.70 (.185) * Function 4: SP in DP case. see diagram at end of section. 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 0.50 (.019) OFF OFF OFF ON ON ON II 0.80 (.031) Keyway CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 24 5646AKB 5649AKB 5647AKB 5648AKB 5642AKB 5644THAKB* 5644TH1RAKB* 5644TH2RAKB* Handle position: Terminals connected: 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A27 5000 SERIES - MINIATURE TOGGLE SWITCHES A III 2-3 5-6 8-9 II I 1-2 4-5 7-8 16.50 (.649) 1.00 (.039) 13.10 (.516) 3.70 (.145) I II III 8 1 7 0.80 (.031) 8.00 (.314) 9 2 4.70 (.185) 10.50 (.413) 3 Epoxy terminal seal is standard on these models. 4.75 (.187) 6.35 DIA-40UNS (1/4-40UNS) 21.20 (.834) 1.00 (.039) 13.10 (.516) 3.70 (.145) 0.50 (.019) I II III 10.50 (.413) 8.00 (.314) * Function 4: SP in DP case. see diagram at end of section. 9 12 8 11 7 10 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 7-8 10-11 0.80 (.031) OFF OFF OFF ON ON ON II 24" ON ON MOM ON ON ON ON MOM III 2-3 5-6 8-9 11-12 3.00 DIA (.118 DIA) Keyway CIRCUIT 5666AKB 5669AKB 5667AKB 5668AKB 5662AKB 5664THAKB* 5664TH1RAKB* 5664TH2RAKB* Handle position: Terminals connected: 13.20 (.519) MODEL NO. 1.80 (.070) Four pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts Single pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts ON - ON ON - ON ON OFF ON III II I 5636AB-2V 9.00 (.354) 2 locked positions 2-3 1-2 3V 12.00 (.472) 5639AB-3V Handle position (see dwg.) : Terminals connected: 3.70 (.145) 3 locked positions 0.50 (.019) 0.80 (.031) 14.85 (.584) 5636AB-1V 14.75 (.580) 1 locked position 15.10 (.594) CIRCUIT 6.35 DIA-40UNS (1/4-40UNS) 2V MODEL NO. Epoxy 1V Keyway Double pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts ON - ON ON - ON ON OFF ON III 2-3 5-6 II I 1-2 4-5 2 locked positions 5646AB-2V 0.50 (.019) Keyway A28 3V 12.00 (.472) 3.70 (.145) 5649AB-3V Handle position (see dwg.) : Terminals connected: 9.00 (.354) 3 locked positions 0.80 (.031) Epoxy 4.75 (.187) 14.85 (.584) 5646AB-1V 14.75 (.580) 1 locked position 15.10 (.594) CIRCUIT 6.35 DIA-40UNS (1/4-40UNS) 2V MODEL NO. 1V APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ON ON MOM MOM MOM Epoxy terminal seal is standard on these models. 4.75 (.187) OFF OFF OFF - 0.50 (.019) ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 24 5656AKB 5659AKB 5657AKB 5658AKB 5652AKB Handle position (see dwg.) : Terminals connected: 1.80 (.070) Keyway CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Three pole - standard actuator - 1/4-40 splashproof bushing - solder lug terminals - silver contacts 5000 SERIES - MINIATURE TOGGLE SWITCHES A Three pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts CIRCUIT ON - ON ON - ON ON OFF ON III 2-3 5-6 8-9 II I 1-2 4-5 7-8 9.00 (.354) 5656AB-2V 3 locked positions 3V 13.00 (.511) 5659AB-3V Handle position (see dwg.) : Terminals connected: 3.70 (.145) 0.80 (.031) 0.50 (.019) 4.75 (.187) Epoxy Keyway 1V Four pole - locking actuator - 1/4-40 threaded bushing - solder lug terminals - silver contacts CIRCUIT ON - ON ON - ON ON OFF ON III 2-3 5-6 8-9 11-12 II I 1-2 4-5 7-8 10-11 2 locked positions 5666AB-2V 3V 13.00 (.511) 5669AB-3V Handle position (see dwg.) : Terminals connected: 3.70 (.145) 3 locked positions 0.80 (.031) 0.50 (.019) 4.75 (.187) Epoxy 14.85 (.584) 5666AB-1V 14.75 (.580) 1 locked position 15.10 (.594) 6.35 DIA-40UNS (1/4-40UNS) 2V MODEL NO. 9.00 (.354) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 2 locked positions 14.85 (.584) 5656AB-1V 14.75 (.580) 1 locked position 15.10 (.594) 6.35 DIA-40UNS (1/4-40UNS) 2V MODEL NO. 1V Keyway ON ON MOM MOM MOM III II I 4.70 (.185) 7.00 (.275) 1.00 (.039) 13.30 (.523) 4.00 (.157) Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. II 3 2 III 1 10.50 (.413) 8.00 (.314) 0.80 (.031) 1-2 24 I 2-3 1.60 DIA (.063 DIA) 4.70 (.185) OFF OFF OFF - 6.35 DIA-40UNS (1/4-40UNS) 0.50 (.019) ON ON MOM ON ON Epoxy terminal seal is standard on these models. 13.20 (.519) 5236CDB 5239CDB 5237CDB 5238CDB 5232CDB Handle position (see dwg.) : Terminals connected: CIRCUIT 1.10 (.043) MODEL NO. 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts Keyway Double pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts 6.35 DIA-40UNS (1/4-40UNS) 4.75 (.187) 4.75 (.187) 12.00 (.472) I II 13.30 (.523) III 10.50 (.413) Keyway 8.00 (.314) 4.70 (.185) 4.00 (.157) 0.50 (.019) 1.00 (.039) 1.60 DIA (.063 DIA) 3 6 2 5 1 4 4.70 (.185) * Function 4: SP in DP case. see diagram at end of section. Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. Epoxy terminal seal is standard on these models. 0.80 (.031) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 24 OFF OFF OFF ON ON ON II 1.10 (.043) CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 3.00 DIA (.118 DIA) 5246CDB 5249CDB 5247CDB 5248CDB 5242CDB 5244THCDB* 5244TH1RCDB* 5244TH2RCDB* Handle position: Terminals connected: 13.20 (.519) MODEL NO. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A29 5000 SERIES - MINIATURE TOGGLE SWITCHES A III 2-3 5-6 8-9 II I 1-2 4-5 7-8 Epoxy terminal seal is standard on these models. 16.50 (.649) 4.75 (.187) 1.10 (.043) 14.40 (.567) 1.00 (.039) 4.70 (.185) 4.00 (.157) I II Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. III 8.00 (.314) 3 9 2 8 1 7 4.70 (.185) 0.80 (.031) 10.50 (.413) 1.60 DIA (.063 DIA) 1.60 DIA (.063 DIA) 4.75 (.187) Epoxy terminal seal is standard on these models. 4.70 (.185) 4.75 (.187) 21.20 (.834) I II 4.00 (.157) 14.40 (.567) 1.00 (.039) 0.50 (.019) III 10.50 (.413) * Function 4: SP in DP case. see diagram at end of section. 8.00 (.314) 9 12 8 11 7 10 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 7-8 10-11 24 OFF OFF OFF ON ON ON II 6.35 DIA-40UNS (1/4-40UNS) 0.80 (.031) Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. CIRCUIT ON ON MOM ON ON ON ON MOM III 2-3 5-6 8-9 11-12 3.00 DIA (.118 DIA) 5266CDB 5269CDB 5267CDB 5268CDB 5262CDB 5264THCDB* 5264TH1RCDB* 5264TH2RCDB* Handle position Terminals connected: 13.20 (.519) MODEL NO. Keyway 1.10 (.043) Four pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terms. - gold or silver contacts 1.10 DIA (.043 DIA) 2-3 0.60 (.023) 13.10 (.515) 7.00 (.275) I 1-2 Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 16.90 (.665) 1.00 (.039) 5.08 (.200) II ON ON MOM MOM MOM I 3 III OFF OFF OFF - II 2 ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 24 5236MIWRCD 5239MIWRCD 5237MIWRCD 5238MIWRCD 5232MIWRCD Handle position (see dwg.) : Terminals connected: 5.08 (.200) III 10.50 (.413) 8.00 (.314) EPOXY Keyway 0.60 1 (.023) CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 threaded bushing - wire-wrap terminals - gold or silver contacts A30 * Function 4: SP in DP case. see diagram at end of section. Keyway 0.60 (.023) 13.10 (.515) 12.00 (.472) 16.90 (.665) 5.08 (.200) 1.00 (.039) II 3 I 2 ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 6.35 DIA-40UNS (1/4-40UNS) III 10.50 (.413) 8.00 (.314) EPOXY 0.60 1 (.023) OFF OFF OFF ON ON ON II 5.08 (.200) 24 ON ON MOM ON ON ON ON MOM III 2-3 5-6 5.08 (.200) 5246MIWRCD 5249MIWRCD 5247MIWRCD 5248MIWRCD 5242MIWRCD 5244MIWRTHCD* 5244MIWRTH1RCD* 5244MIWRTH2RCD* Handle position: Terminals connected: Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 1.10 DIA (.043 DIA) CIRCUIT 13.20 (.519) MODEL NO. 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 threaded bushing - wire-wrap terminals - gold or silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ON ON MOM MOM MOM 4.75 (.187) OFF OFF OFF - 0.50 (.019) CIRCUIT ON ON MOM ON ON 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 5256CDB 5259CDB 5257CDB 5258CDB 5252CDB Handle position (see dwg.) : Terminals connected: Keyway 24 MODEL NO. 3.00 DIA (.118 DIA) Three pole - standard actuator - 1/4-40 threaded bushing - straight p.c. terminals - gold or silver contacts 5000 SERIES - MINIATURE TOGGLE SWITCHES A Single pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts III II I 2.67 DIA (.105) 3 2 0.50 (.019) 1-2 Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 5.08 (.196) 4.70 (.185) 12.70 (.500) ON ON MOM MOM MOM 7.40 (.291) OFF OFF OFF - III 12.70 (.500) ON ON MOM ON ON 2-3 II 24 I 11.00 7.20 7.30 (.433) (.283) (.287) 5236WCDB16X404 5239WCDB16X404 5237WCDB16X404 5238WCDB16X404 5232WCDB16X404 Handle position (see dwg.) : Terminals connected: 6.25 DIA (.246 DIA) CIRCUIT 1 Epoxy 7.00 (.275) 0.80 (.031) 1.60 DIA (.062 DIA) 4.70 (.185) Double pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts 6.25 DIA (.246 DIA) Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. CIRCUIT ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 2.67 DIA (.105) 1.60 DIA (.062 DIA) 3 2 0.50 (.019) Epoxy 0.80 (.031) 4.70 (.185) * Function 4: SP in DP case. see diagram at end of section. 6 1 5.08 (.196) 3.81 12.70 (.150) (.500) OFF OFF OFF ON ON ON II III 7.40 (.291) ON ON MOM ON ON ON ON MOM III 2-3 5-6 II 24 12.70 (.500) 5246WCDB16X404 5249WCDB16X404 5247WCDB16X404 5248WCDB16X404 5242WCDB16X404 5244WTHCDB16X404* 5244WTH1RCDB16X404* 5244WTH2RCDB16X404* Handle position: Terminals connected: I 4.70 (.185) 3 3.81 (.150) MODEL NO. 11.00 7.20 7.30 (.433) (.283) (.287) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 12.00 (.472) Three pole - short actuator - 1/4" smooth bushing - horizontal rt. angle p.c. terms. - gold or silver contacts II I 1-2 4-5 7-8 16.60 (.653) 14.35 (.564) 1.60 DIA (.062 DIA) 3.81 (.150) 4.70 (.185) 8.50 6.00 12.5 (.334) (.236) (.492) 3.70 (.145) 7 III 4 5 II 24 I 0.80 (.031) 1.00 (.039) Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 7.20 (.283) 4.70 (.185) III 2-3 5-6 8-9 1.10 (.043) 0.50 (.019) ON ON MOM MOM MOM 2.67 DIA (.105 DIA) OFF OFF OFF - 6.25 DIA (.246 DIA) ON ON MOM ON ON 3.81 14.35 (.150) (.564) Epoxy 13.20 (.519) 5256WCDB16 5259WCDB16 5257WCDB16 5258WCDB16 5252WCDB16 Handle position (see dwg.) : Terminals connected: 5.08 (.196) CIRCUIT 5.08 (.200) MODEL NO. 9 6 Single pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts Epoxy 7.00 (.275) III II 5.08 (.200) 12.70 (.500) 1.10 (.043) ON ON MOM MOM MOM 2.67 DIA (.105 DIA) OFF OFF OFF - 3.81 (.150) CIRCUIT ON ON MOM ON ON 7.20 11.00 (.283) (.433) 7.30 (.287) I Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 1-2 13.20 (.519) I 2-3 3 II 24 2 0.80 (.301) III 3.00 (.118) 5236WWCDB16X445 5239WWCDB16X445 5237WWCDB16X445 5238WWCDB16X445 5232WWCDB16X445 Handle position (see dwg.): Terminals connected: 6.25 DIA (.246 DIA) MODEL NO. 1.60 DIA (.062 DIA) 6.85 (.269) 12.70 (.500) 3.81 (.150) 1 1.00 (.039) 5.08 (.200) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A31 5000 SERIES - MINIATURE TOGGLE SWITCHES A Double pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts 4.75 (.187) Epoxy 4.75 (.187) 3.81 (.150) 12.00 (.472) 7.30 (.287) 1.60 DIA (.062 DIA) 5.08 (.200) 7.20 11.00 (.283) (.433) I II 24 0.80 (.301) III * Function 4: SP in DP case. see diagram at end of section. 12.70 (.500) 6.85 (.269) 12.70 (.500) 1.10 (.043) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 2.67 DIA (.105 DIA) OFF OFF OFF ON ON ON II 6.25 DIA (.246 DIA) ON ON MOM ON ON ON ON MOM III 2-3 5-6 13.20 (.519) 5246WWCDB16X445 5249WWCDB16X445 5247WWCDB16X445 5248WWCDB16X445 5242WWCDB16X445 5244WWTHCDB16X445* 5244WWTH1RCDB16X445* 5244WWTH2RCDB16X445* Handle position: Terminals connected: 3 6 2 5 1 4 1.00 (.039) 3.81 (.150) 5.08 (.200) Three pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts 7.20 12.45 (.283) (.490) 16.50 (.649) 14.35 (.564) 1.60 DIA (.062 DIA) 5.08 (.200) I 3 9 II 24 2 8 III 1 6.90 (.271) 3.00 (.118) Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 4.75 (.187) 1.10 (.043) ON ON MOM MOM MOM I 1-2 4-5 7-8 0.80 (.031) OFF OFF OFF II 2.67 DIA (.105 DIA) ON ON MOM ON ON III 2-3 5-6 8-9 6.25 DIA (.246 DIA) CIRCUIT 5256WWCDB16X514 5259WWCDB16X514 5257WWCDB16X514 5258WWCDB16X514 5252WWCDB16X514 Handle position: Terminals connected: 13.20 (.519) MODEL NO. 4.75 (.187) 3.81 (.150) Epoxy 7.25 (.285) 3.81 (.150) 14.35 (.564) 7 1.00 (.039) 5.08 (.200) Four pole - short actuator - 1/4" smooth bushing - vertical rt. angle p.c. terms. - gold or silver contacts Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 4.75 (.187) 1.10 (.043) 3.81 (.150) 5.08 (.200) 0.80 (.031) 7.20 12.45 (.283) (.490) I 9 12 II 24 8 11 III 7 6.90 (.271) 7.25 (.285) 14.35 (.564) 14.35 (.564) 2.67 DIA (.105 DIA) 1.60 DIA (.062 DIA) 21.20 (.834) 13.20 (.519) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON MOM ON ON ON ON ON MOM MOM ON MOM III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 5.08 (.200) * Function 4: SP in DP case. see diagram at end of section. 3.00 (.118) 5266WWCDB16X514 5269WWCDB16X514 5267WWCDB16X514 5268WWCDB16X514 5262WWCDB16X514 5264WWTHCDB16X514* 5264WWTH1RCDB16X514* 5264WWTH2RCDB16X514* Handle position: Terminals connected: 6.25 DIA (.246 DIA) CIRCUIT 4.75 (.187) Epoxy MODEL NO. 10 1.00 (.039) 3.81 (.150) Single pole - short actuator - 1/4" smooth bush. - straight p.c. terms. - bracket mtg. - gold or silver contacts CIRCUIT II I 2-3 I 6.25 DIA (.246 DIA) 2.67 DIA (.105 DIA) 1.60 DIA (.062 DIA) 3.18 (.125) EPOXY 1-2 3.18 (.125) 1 2 3 15.75 (.620) 0.40 (.015) 1.27 (.050) 15.75 (.620) III II 24 4.70 (.185) ON ON MOM MOM MOM 7.20 7.30 (.283) (.287) OFF OFF OFF - Note: above models have gold contacts. Substitute 'A' for 'CD' for silver contacts. A32 III ON ON MOM ON ON 13.00 (.511) 5236YCDB16X445 5239YCDB16X445 5237YCDB16X445 5238YCDB16X445 5232YCDB16X445 Handle position (see dwg.): Terminals connected: 4.10 (.161) MODEL NO. 7.00 (.275) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. CIRCUIT 3.00 (.118) MODEL NO. 5000 SERIES - MINIATURE TOGGLE SWITCHES A Double pole - short actuator - 1/4" smooth bush. - straight p.c. terms. - bracket mtg. - gold or silver contacts 6.25 DIA (.246 DIA) 2.67 DIA (.105 DIA) 1.60 DIA (.062 DIA) 3.18 (.125) EPOXY 1 3.18 (.125) 2 3 15.75 (.620) 0.40 (.015) 1.27 (.050) 15.75 (.620) 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 I 7.20 6.90 (.283)(.271) OFF OFF OFF ON ON ON II II 13.00 (.511) ON ON MOM ON ON ON ON MOM III 2-3 5-6 III 24 4.70 (.185) Note: Listed models have gold contacts. Substitute 'A' for 'CD' for silver contacts. 5246YCDB16X445 5249YCDB16X445 5247YCDB16X445 5248YCDB16X445 5242YCDB16X445 5244YTHCDB16X445* 5244YTH1RCDB16X445* 5244YTH2RCDB16X445* Handle position: Terminals connected: 8.20 (.322) CIRCUIT 4.75 (.187) 12.00 (.472) * Function 4: SP in DP case. see diagram at end of section. Single pole - paddle actuator - 1/4" threaded bushing - solder lug terminals - silver contacts Keyway I 8.00 (.314) 1.00 (.039) Epoxy 12.00 (.472) 3.70 (.145) II 24 3 2 III 1 4.70 (.185) Above models have black paddle. 7.00 (.275) 14.15 (.557) 0.50 (.019) ON ON MOM MOM MOM I 1-2 0.80 (.031) OFF OFF OFF II 5.30 (.208) CIRCUIT ON ON MOM ON ON III 2-3 6.60 (.259) 5636AB4N+U242N 5639AB4N+U242N 5637AB4N+U242N 5638AB4N+U242N 5632AB4N+U242N Handle position: Terminals connected: 2.25 (.088) MODEL NO. 1.80 (.070) 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 12.60 (.496) 1.80 (.070) 1.00 (.039) Epoxy 12.00 (.472) 3.70 (.145) 0.50 (.019) I 8.00 (.314) 3 6 II 24 2 5 III 1 4 12.60 (.496) 4.70 (.185) *Function 4: SP in DP case. see diagram at end of section Above models have black paddle. 12.00 (.472) 14.15 (.557) 0.80 (.031) ON ON MOM MOM MOM ON MOM MOM I 1-2 4-5 5.30 (.208) OFF OFF OFF ON ON ON II 6.60 (.259) ON ON MOM ON ON ON ON MOM III 2-3 5-6 2.25 (.088) 5646AB4N+U242N 5649AB4N+U242N 5647AB4N+U242N 5648AB4N+U242N 5642AB4N+U242N 5644THAB4N+U242N* 5644TH1RAB4N+U242N* 5644TH2RAB4N+U242N* Handle position: Terminals connected: 6.35 DIA-40UNS (1/4-40UNS) Keyway CIRCUIT 13.20 (.519) MODEL NO. 4.75 (.187) Double pole - paddle actuator - 1/4" threaded bushing - solder lug terminals - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A33 5000 SERIES - MINIATURE TOGGLE SWITCHES A 5000 Series switches for peak currents 2-120 amps at 60 VDC - 10,000 cycles minimum. 3-40 amps at 125/250 VAC - 10,000 cycles minimum. Silver nickel alloy (AgNi) contacts. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Other specifications same as 5000 Series. Also see 'Switches for Peak Currents' technical page in rear of catalog. EPOXY CIRCUIT ON ON 7.00 (.275) 12.00 (.472) 3.70 (.145) 0.50 (.019) 1.00 (.039) II 3 24 13.20 (.519) I 2 III 1 0.80 (.031) 10.50 8.00 (.413) (.314) 4.70 (.185) MODEL NO. 5636ABX814 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) 3.00 DIA (.118 DIA) Single pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals Keyway CIRCUIT ON ON III 10.50 8.00 (.413) (.314) A34 3.70 (.145) 24 13.20 (.519) I II 12.00 (.472) 0.50 (.019) 1.00 (.039) 3 6 2 5 1 4 4.70 (.185) 12.00 (.472) Keyway 4.75 (.187) EPOXY 0.80 (.031) MODEL NO. 5646ABX814 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) 3.00 DIA (.118 DIA) Double pole - standard actuator - 1/4-40 threaded bushing - solder lug terminals APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 5000 SERIES - MINIATURE TOGGLE SWITCHES A Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Terminals Number & bushings of poles Electrical functions Terminals (For function 4 models only) connections /functions Contact materials 5 3 4 5 6 Single pole Double pole Three pole Four pole 2 Straight p.c.,right angle, quick connect or wire-wrap terminals with 1/440 (6.35mm) threaded bushing. 6 Solder lug terminals with 1/4-40 (6.35mm) or 15/3232 (11.9mm) threaded bushings. 6 ON ON 9 ON OFF ON 7 MOM OFF MOM 8 ON OFF MOM 2 ON MOM 4* ON ON ON 4* ON 0N MOM 4* MOM ON MOM * specify selection from 'connections/ functions' box also (For double & four pole only). (NONE) M Solder lugs with 15/32-32 (11.9mm) bushing M I W R Wire-wrap (epoxy term. seal standard) W Horizontal right angle p.c. (NONE) T H T H 1 T H 2 ON ON R ON ON R MOM ON ON MOM MOM A Silver A D Silver, gold plated C D Brass, gold plated W W Vertical right angle p.c. Y Straight p.c. w/mounting brk't. Z Quick connect (epoxy term. seal standard) Options: Black finish Sealing (NONE) G Matte black finish on bushing, actuator & hardware. (NONE) Unless standard (see Terminals above) B Epoxy sealed terminals K Front panel sealing with o-ring & gasket. K B Both of above Examples of completely specified model numbers: 5636AB, 5244WWTH2RAB16UL Actuators Agency Recognition (NONE) 1 3 Standard 2 7 8 Flat 9 Flat 1 2 Flat 1 6 1 7 2 1 Insulated 2 2 2 3 2 4 Large (long) 2 5 2 7 Large (short) 4 N For paddles only 1 V Locking (1 position) 2 V Locking (2 positions) 3 V Locking (3 positions) (see actuator drawings). (NONE) U L C S A V D E L N Z Telecommunications listing G A M Military listing (consult factory for details of approved models). Special options (NONE) See listing on pg. C39 Caps and paddles (NONE) Caps U 2 7 0 U 1 7 1 0 U 6 4 0 Paddles U 2 4 0 N U 2 9 0 N U 3 9 0 N (see drawings and color codes). Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A35 5000 SERIES - MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS SEALING (NONE) Indicates no terminal sealing. Indicates front panel sealing with o-ring (1) and gasket (2) to protect the switch from water and dust. Withstands 1 bar pressure. Available on models with 1/4" (6.35mm) or 15/32" (11.9mm) threaded bushings. Not available with actuators 8,9, 12, 22 or 23. Includes both B and K above. 2 2 Includes gasket washer U60 Includes gasket washer U360 ACTUATORS for 1/4" (6.35mm) threaded bushings 3.00 DIA (.118) 9.00 (.354) 1.00 (.039) 9.00 (.354) 10.50 (.413) 16.00 (.629) 3.00 DIA (.118 DIA) 13 Standard 4N For use with paddles only 2 5.00 DIA (.196 DIA) 8 Not available with option K 4.20 DIA (.165 DIA) 6.30 (.248) 11.40 (.448) 21.30 (.838) 5.00 DIA (.196 DIA) 9 Not available with option K 12 Not available with option K 3.30 DIA (.129) DIA) 16 21.30 (.838) 16.40 (.645) 2.80 DIA (.110 DIA) 5.50 (.216) 7.00 (.275) 2.70 DIA (.354 DIA) 17 16.30 (.642) 21.30 (.838) 14.00 (.551) 23 Not available with option K 2 black 4 grey 6 red 9 orange 3.30 DIA (.129 DIA) 3.30 DIA (.129 DIA) A36 insulative extension with this actuator and replace '0' with color selection below. 1 blue 3 green 5 yellow 7/1 white 3.30 DIA (.129 DIA) 22 Not available with option K 21 Specify U640 25 Not available with option K APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE K B 1 1 4 Maxi (.157 MAX) K Indicates epoxy terminal sealing. Note: for models with 'Z' and 'MIWR' epoxy terminal sealing is standard and need not be specified with 'B'. 3 Maxi (.118 MAX) B K with 15/32" (11.9mm) flatted bushing K with 1/4" (6.35mm) keyway bushing 5000 SERIES - MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS (cont'd.) ACTUATORS for 15/32" (11.9mm) threaded bushings 5.00 DIA (.196 DIA) 11.70 (.460) 17.50 (.688) 11.90 (.468) 11.90 (.468) 27 24 LOCKING ACTUATORS for 1/4" (6.35mm) threaded bushings Other locking actuator styles available - consult factory. 6.35 DIA-40UNS (1/4-40UNS) 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 15.10 (.594) 14.75 (.580) 14.85 (.584) 5.20 DIA (.204 DIA) 9.00 (.354) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.00 DIA (.196 DIA) 1V 1 locked position (function 6) 2V 2 locked positions (function 6) 3V 3 locked positions (functions 9 & 4) ACTUATORS for smooth bushing models (W, WW & Y) 3.00 DIA (.118 DIA) 6.00 (.236) 12.00 (.472) 1.00 (.039) 13.50 (.531) 19.00 (.748) 3.00 DIA (.118 DIA) 13 Standard 4N For use with paddles only 2 2.60 DIA (.102 DIA) 2.80 DIA (.110 DIA) 6.70 (.263) 8.50 (.334) 10.00 (.393) 2.70 DIA (.106 DIA) 16 7 17 3.30 DIA (.129 DIA) 16.40 (.645) 24.30 (.956) Colors 1 2 3 4 5 6 7/1 9 blue black green grey yellow red white orange Note that for switches with mounting brackets, the actuator length may be reduced by .015" (0.4mm). Refer to individual switch drawings. ' 21 Specify U640 insulative extension with this actuator and replace '0' with color selection. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A37 5000 SERIES - MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS (cont'd.) 4N For use with paddles only 9 Not available w/function 2 (ON - MOM) 12 Not available w/function 2 (ON - MOM) 7.30 (.287) 8.80 8.80 (.346) (.346) 23.10 (.909) 8 Not available w/function 2 (ON - MOM) 8.10 (.318) 13.20 (.519) 23.10 (.909) 2 16.40 (.645) 13 Standard 17 16 21 Specify U640 insulative extension with this actuator and replace '0' with color selection below. 15.80 (.622) 23.10 (.909) Colors 1 2 3 4 5 6 7/1 9 22 Not available with sealing option K or X408 23 blue black green grey yellow red white orange 3.5 DIA (.137 DIA) U270 For actuator 13 and threaded bushing only A38 7.30 (.287) 11.00 (.433) 13.50 (.531) INSULATING CAPS (replace '0' in part numbers below with color code) 3.5 DIA (.137 DIA) U1040 For actuator 13 and smooth bushing only 3.5 DIA (.137 DIA) U1710 For actuator 17 and threaded bushing or actuator 7 and smooth bushing only APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 10.80 (.425) 1.00 (.039) 7.20 (.283) 12.30 (.484) 17.80 (.700) ACTUATORS for switches with X404 and X445 options (see 'special options' pages following) 5000 SERIES - MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS (cont'd.) Mat'l: UL94HB Polyamide (replace '0' in part numbers below with color code from preceeding pg.) 2.00 (.078) 2.00 (.078) 6.60 (.259) U240N 14.00 (.551) 18.00 (.708) 6.35 DIA-40UNS (1/4-40UNS) 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 21.40 (.842) 21.55 (.848) 20.00 (.787) 14.15 (.557) 6.00 (.236) 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 11.00 (.433) 6.00 (.236) 9.00 (.354) 5.30 (.208) 12.60 (.496) U390N U290N SPECIAL OPTIONS 6.25 DIA (.246 DIA) Threaded bushing 1/4" (6.35mm) to replace plain bushing on models with W, WW & Y. X404 Switches with W option with short actuator and offset terminal bends (see Page A25). X435 .732" (18.6mm) long p.c. terminals - epoxy terminal seal standard. X438 Smooth bushing .246" (6.25mm). Height.283" (7.2mm) without shoulder. X442 Threaded bushing 1/4" (6.35mm). Height .389" ( 9.9mm). X445 Smooth bushing .283" (7.2mm) for W, WW & Y models. Available with same actuators, insulating cap and paddles as X404. X500 Threaded bushing 1/4" (6.35mm). Height .354" (9mm) without shoulder. X507 .293" (10mm) long p.c. terminals. X512 1.062" (27mm) long p.c. terminals - epoxy terminal seal standard. X514 Spacing .564" (14.35mm) instead of .500" (12.7mm) for 3 and 4 pole WW models. X515 Smooth bushing .246" (6.25mm) without shoulder. X601 Silver plated brass contacts. Ratings - 0.2 amps 250 VAC, 0.4 amps 125 VAC or 0.5 amps 30 VDC. Electrical life : 20,000 cycles min. Minimum quantity: 5000 pcs. X681 Satin chrome actuator for flat actuators. X729 1/299" (33mm) long p.c. terminals. X764 Special customer specified marking. X769 Red anodized locking lever top. X806 Smooth bushing .246" (6.25mm) instead of standard threaded bushing and silver plated brass contacts. 9.00 (.354) 1.00 (.039) 6.25 DIA (.246 DIA) X438 6.35 DIA-40UNS (1/4-40UNS) 6.25 DIA (.246 DIA) 9.90 (.389) 0.30 (.011) X386 X445 X442 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 14.35 (.564) X500 Printed circuit terminal lengths Option X435 X507 Length L .732 (18.6mm) .293 (10mm) X512 X729 1.062 (27mm) 1.299 (33mm) 6.25 DIA (.246 DIA) X514 6.25 (.246 DIA) 1.00 (.039) Locking lever on model with smooth bushing. 6.35 DIA-40UNS (1/4-40UNS) 14.75 (.580) X916 X372 9.00 (.354) Switches for peak current. See pg. A28. X371 6.00 (.236) X814 1.00 (.039) X386 1.00 (.039) Threaded bushing 1/4" (6.35mm). Height .274" (7mm). 7.00 (.275) X372 7.20 (.283) Smooth bushing .246" (6.25mm) instead of standard threaded bushing. 7.20 (.283) X371 6.35 DIA-40UNS (1/4-40UNS) 1.00 (.039) Tin plated terminals (for p.c. terminals only). 6.00 (.236) F L SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 2.25 (.088) 11.00 (.433) 21.55 (.848) PADDLES for actuator 4N only. X515 X916 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A39 5000 SERIES - MINIATURE TOGGLE SWITCHES A PANEL CUT-OUTS & MISCELLANEOUS PANEL CUT-OUTS for 1/4" (6.35mm) bushings 2.20 DIA (.086 DIA) 6.50 DIA (.255 DIA) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 1.10 (.043) 6.50 DIA (.255 DIA) 2.70 (.106) 5.20 (.204) Standard (with locking ring supplied) With K sealing option PANEL CUT-OUTS for 15/32" (11.9mm) bushings 12.50 DIA (.492 DIA) 3.50 DIA (.137 DIA) 1.70 (.066) 12.50 DIA (.492 DIA) 9.60 (.377) 5.10 (.200) Standard (with locking ring supplied) With K sealing option WIRING for function 4 switch 6 6 6 5 III 4 5 II 5 I 4 4 S.4 I E 3 6 9 12 3 6 9 12 3 6 9 12 2 5 8 11 2 5 8 11 2 5 8 11 1 4 7 10 1 4 7 10 1 4 7 10 5 S.1 II S.3 III S.10I TH E 11 S.7 II S.9 III Above diagrams are viewed from bottom of switch. Equivalent to single pole 3 throw switch. Dotted lines between terminals 2 & 6 and 8 & 12 indicate external jumpers to be added by customer. A40 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 55000 SERIES - VDE APPROVED MINIATURE TOGGLE SWITCHES A FEATURES VDE, UL and CSA recognition standard on all models. SPDT & DPDT models with numerous options. Configurations for panel, panel & p.c. and p.c. mounting. Epoxy terminal sealing standard on all models. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive): Operating temperature range: Insulation: Contact opening: Creepage distance & air gap: 3 Amps at 250 VAC, 6 Amps at 125 VAC 10 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 2000 V rms min. - between poles and terminals and frame 50,000 cycles minimum -40C to +85C Class 1 per IEC 1058-1 less than .118" (3mm) .118" (3mm) minimum MATERIALS Contacts & Terminals: Actuator: Bushing: Housing: Case: Terminal seal: Hardware: Silver Chrome plated brass with insulating vinyl cap or UL94HB polyamide paddle Nickel plated brass Stainless steel Diallyl phthalate (DAP) Epoxy Panel mounting models supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. AGENCY RECOGNITION VDE,UL & CSA Standard, and marked on all models ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Option drawings & miscellaneous APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A41 55000 SERIES - VDE APPROVED MINIATURE TOGGLE SWITCHES Keyway 1/4-40 threaded bushing - solder lug terminals III 4.00 DIA (.157 DIA) II I 1-2 4-5 4.75 (.187) 11.00 (.433) 1 Above models have black cap. 3 2 4.70 (.185) 12.00 (.472) 1.80 (.070) DP SP Keyway III 4.00 DIA (.157 DIA) 11.00 (.433) 1.00 (.039) 1 2 3 4.70 (.185) 12.00 (.472) DP EPOXY I II 5.08 (.200) 6.25 DIA (.246 DIA) III 24 3.70 (.145) 12.70 (.500) 12.70 (.500) 1 4.70 (.185) 7.00 (.275) 13.20 (.519) EPOXY 5.08 (.200) 12.70 (.500) 2 4.70 (.185) SP DP Keyway III 4.00 DIA (.157 DIA) 6.35 DIA-40UNS (1/4-40UNS) 11.00 (.433) 11.50 (.452) 12.00 (.472) Above models have black cap. EPOXY DP 1 2 13.10 (.515) 1.00 (.039) 4.75 (.187) 3 4.70 (.185) 13.20 (.519) 5.30 (.208) I 1-2 4-5 I 8.00 (.314) CIRCUIT ON OFF ON 2.00 (.078) ON ON II 24 14.00 (.551) CIRCUIT ON OFF ON 4.40 (.173) ON ON II 7.40 (.291) 13.50 (.531) 11.00 6.00 (.433) (.236) 7.40 (.291) 12.00 (.472) 3 4.70 (.185) I 1-2 4-5 4.70 (.185) 1.60 DIA (.062 DIA) 1.10 (.043) II 2.00 (.078) III 2-3 5-6 12.70 (.500) CIRCUIT ON OFF ON 4.70 (.185) ON ON 14.50 (.570) CIRCUIT ON ON ON OFF ON 1/4-40 threaded bushing - quick-connect terminals A42 4.75 (.187) 7.00 (.275) SP 4.00 DIA (.157 DIA) Above models have black cap. Vertical right angle p.c. terminals also available on request. III 2-3 5-6 1.10 (.043) 13.20 (.519) Keyway 1/4" smooth bushing - horizontal right angle p.c. terminals SINGLE POLE MODEL NO. 55236ZAVDEULCSA+U272 55239ZAVDEULCSA+U272 DOUBLE POLE MODEL NO. 55246ZAVDEULCSA+U272 55249ZAVDEULCSA+U272 Handle position (see dwg.) : Terminals connected: 13.30 (.523) 8.00 (.314) 4.75 (.187) Above models have black cap. SINGLE POLE MODEL NO. 55236WAVDEULCSA+U1042 55239WAVDEULCSA+U1042 DOUBLE POLE MODEL NO. 55246WAX433VDEULCSA+U1042 55249WAX433VDEULCSA+U1042 Handle position (see dwg.) : Terminals connected: 1.60 DIA (.062 DIA) 4.70 (.185) I 1-2 4-5 6.35 DIA-40UNS (1/4-40UNS) 4.00 (.157) II 2.00 (.078) III 2-3 5-6 14.00 (.551) CIRCUIT ON ON ON OFF ON I 11.50 (.452) CIRCUIT ON OFF ON 3.30 (.129) ON ON II 24 4.70 (.185) 1/4-40 threaded bushing - straight p.c. terminals SINGLE POLE MODEL NO. 55236AVDEULCSA+U272 55239AVDEULCSA+U272 DOUBLE POLE MODEL NO. 55246AVDEULCSA+U272 55249AVDEULCSA+U272 Handle position (see dwg.) : Terminals connected: 7.00 (.275) 13.20 (.519) EPOXY SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE III 2-3 5-6 12.00 (.472) CIRCUIT ON OFF ON 1.00 (.039) ON ON 6.35 DIA-40UNS (1/4-40UNS) 11.50 (.452) CIRCUIT ON OFF ON I 8.00 (.314) ON ON 2.00 (.078) SINGLE POLE MODEL NO. 55636AVDEULCSA+U272 55639AVDEULCSA+U272 DOUBLE POLE MODEL NO. 55646AVDEULCSA+U272 55649AVDEULCSA+U272 Handle position (see dwg.) : Terminals connected: II 24 3.70 (.145) A 1.57 (.061) 7.00 (.275) SP APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 55000 SERIES - VDE APPROVED MINIATURE TOGGLE SWITCHES A Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Terminals & bushings Number of poles Electrical functions Terminals Contact material A 5 5 3 Single pole 4 Double pole 2 Printed circuit or quick-connect terminals with 1/4-40 (6.35mm) threaded or smooth bushing. 6 Solder lug terminals with 1/4-40 (6.35mm) threaded bushing. 6 ON 9 ON ON OFF ON (NONE) W Horizontal right angle p.c. Z Quick connect Silver Options: Actuators Agency Recognition V NONE 4 N For paddles D E U L C S Insulating caps and paddles + A Caps U 2 7 0 U 1 0 4 0 Paddles U 2 4 0 N U 2 9 0 N U 3 9 0 N (see drawings and color codes). VDE, UL & CSA standard Example of completely specified model number: 55236ZAVDEULCSA+U272 Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. Note: VDE requires cap or paddle selection. OPTION DRAWINGS 13 for threaded bushing models Cap U270 is required 13 for smooth bushing models Cap U1040 is required 12.00 (.472) 1.00 (.039) 6.00 (.236) 1.00 (.039) 14.50 (.570) 11.50 (.452) ACTUATORS 9.00 (.354) 4N For use with paddles only Paddle U240N, U290N or U 390N is required. INSULATING CAPS supplied cemented to lever (replace '0' in part number with color code) 13.50 (.531) Colors 11.00 (.433) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT 3.5 DIA (.137 DIA) 3.5 DIA (.137 DIA) U270 for threaded bushing models U1040 for smooth bushing models 1 2 3 4 5 6 7/1 9 blue black green grey yellow red white orange APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A43 55000 SERIES - VDE APPROVED MINIATURE TOGGLE SWITCHES A OPTION DRAWINGS & MISCELLANEOUS Note: Order Paddle separately. 2.00 (.078) 9.00 (.354) U240N 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) 21.55 (.848) 6.00 (.236) 20.00 (.787) 14.15 (.557) 12.60 (.496) 5.30 (.208) 6.35 DIA-40UNS (1/4-40UNS) U290N 2.00 (.078) Replace '0' in part numbers with color code. 11.00 (.433) Colors 6.00 (.236) 14.00 (.551) 18.00 (.708) 21.55 (.848) 21.40 (.842) 11.00 (.433) 6.60 (.259) 2.25 (.088) 9.00 (.354) 6.35 DIA-40UNS (1/4-40UNS) U390N 1 2 3 4 5 6 7/1 9 blue black green grey yellow red white orange GROUNDING LUG Note: Order Grounding Lug separately. IMPORTANT: required on models with threaded bushing if panel is non-metallic or not connected to ground. 1.40 DIA (.055 DIA) 0.80 (.031) 0 7.491) (.2 4.80 (.188) 6.50 DIA (.255 DIA) 11.8 DIA (.464 DIA) U721 PANEL CUT-OUT for1/4" threaded bushing 6.50 DIA (.255 DIA) 2.20 DIA (.086 DIA) 5.20 (.204) A44 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PADDLES for use with lever 4N (shown with threaded bushing) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ST SERIES - MINIATURE TOGGLE SWITCHES A FEATURES Dry circuit through power ratings . Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive loads): Operating temperature range: (Q) power models - coin silver: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC. (B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max. UL models - coin silver: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). UL file no. E66367. CSA models - coin silver: same ratings as UL models. CSA file no. LR54592-1. 3 milliohms max. at 3 VDC, 0.1 Amp. Greater than 200,000 megohms between terminals & case ground. Greater than 2000 VAC for 1 minute between terminals & case ground. 100,000 cycles min.for ST1-1 & ST2-1. Other models, 40,000 cycles min. -30C to +85C MATERIALS Contacts: Actuator: Bushing: Strap: Case: Terminal seal: Support bracket: Spring mounting bracket: Bezel & bezel insert: Hardware: LED: Coin silver for power,UL & CSA models. Gold over nickel over brass for dry circuit models. Brass, bright nickel or chrome plated. Nickel plated brass Stainless steel Melamine Phenolic, color red Epoxy (optional) Brass or steel, tin plated Stainless steel Nylon. Available in black, red & white. Consult factory for other colors. See 'Miscellaneous' section. Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. continuous forward current: 15 mA for red, 30 mA for green & 20 mA for yellow. Red is standard. Yellow & green are optional. Specifications are subject to change without notice - consult factory. AGENCY RECOGNITION UL, & CSA. Marking: Switches ordered by UL model number are supplied with recognition marking. Switches ordered by UL model no. and with '/CSA' added at end of model no. are supplied with both recognitions marked. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. Miscellaneous c. 'build your own switch' order format d. Option drawings & information e. Panel cut-outs APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A45 ST SERIES - MINIATURE TOGGLE SWITCHES Single pole Solder lug terminals - panel mounting DOUBLE POLE Double pole SINGLE POLE Single pole DOUBLE POLE Double pole A46 UL11KMZQ UL12KMZQ UL13KMZQ UL14KMZQ UL15KMZQ ST2-1KMZQ UL21KMZQ ST2-2KMZQ UL22KMZQ ST2-3KMZQ UL23KMZQ ST2-4KMZQ UL24KMZQ ST2-5KMZQ UL25KMZQ ST2-6KMZQ UL26KMZQ ST2-7KMZQ UL27KMZQ ST2-8KMZQ UL28KMZQ Terminals connected (-6, -7 & -8) Terminal numbers for reference only ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 DOUBLE POLE Straight p.c. terminals - panel mounting SINGLE POLE UL MODEL NO. ST1-1KMZQ ST1-2KMZQ ST1-3KMZQ ST1-4KMZQ ST1-5KMZQ Terminal numbers for reference only SINGLE POLE SINGLE POLE Key way POWER CKT. MODEL NO. Key way DRY CKT. MODEL NO. UL MODEL NO. ST1-1KMCB ST1-2KMCB ST1-3KMCB ST1-4KMCB ST1-5KMCB UL11KMCQ UL12KMCQ UL13KMCQ UL14KMCQ UL15KMCQ ST2-1KMCB UL21KMCQ ST2-2KMCB UL22KMCQ ST2-3KMCB UL23KMCQ ST2-4KMCB UL24KMCQ ST2-5KMCB UL25KMCQ ST2-6KMCB UL26KMCQ ST2-7KMCB UL27KMCQ ST2-8KMCB UL28KMCQ Terminals connected (-6, -7 & -8) ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 DOUBLE POLE APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE A ST SERIES - MINIATURE TOGGLE SWITCHES DOUBLE POLE Double pole SINGLE POLE Single pole An 'o'-ring placed internally between the actuator and the bushing, and a gasket placed externally between the bushing flange and mounting panel provides static protection from 3.3 ft. (1 meter) of water for 30 minutes. SINGLE POLE UL MODEL NO. ST1-1F1MZQ ST1-2F1MZQ ST1-3F1MZQ ST1-4F1MZQ ST1-5F1MZQ UL11F1MZQ UL12F1MZQ UL13F1MZQ UL14F1MZQ UL15F1MZQ ST2-1F1MZQ UL21F1MZQ ST2-2F1MZQ UL22F1MZQ ST2-3F1MZQ UL23F1MZQ ST2-4F1MZQ UL24F1MZQ ST2-5F1MZQ UL25F1MZQ ST2-6F1MZQ UL26F1MZQ ST2-7F1MZQ UL27F1MZQ ST2-8F1MZQ UL28F1MZQ Terminals connected (-6, -7 & -8) DOUBLE POLE Terminal numbers for reference only ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 DOUBLE POLE Splashproof bushing - panel mounting SINGLE POLE Key way POWER CKT. MODEL NO. Terminal numbers for reference only SINGLE POLE Double pole SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Single pole Flatted actuator - panel mounting A Key way POWER CKT. MODEL NO. UL MODEL NO. ST1-1KHZQ ST1-2KHZQ ST1-3KHZQ ST1-4KHZQ ST1-5KHZQ UL11KHZQ UL12KHZQ UL13KHZQ UL14KHZQ UL15KHZQ ST2-1KHZQ UL21KHZQ ST2-2KHZQ UL22KHZQ ST2-3KHZQ UL23KHZQ ST2-4KHZQ UL24KHZQ ST2-5KHZQ UL25KHZQ ST2-6KHZQ UL26KHZQ ST2-7KHZQ UL27KHZQ ST2-8KHZQ UL28KHZQ Terminals connected (-6, -7 & -8) ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 DOUBLE POLE APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A47 ST SERIES - MINIATURE TOGGLE SWITCHES Single pole 15/32" threaded bushing - panel mounting DOUBLE POLE WITH T2 ACTUATOR Double pole SINGLE POLE WITH T1 ACTUATOR Single pole DOUBLE POLE Double pole A48 ST1-1T1M4ZQ ST1-2T1M4ZQ ST1-3T1M4ZQ ST1-4T1M4ZQ ST1-5T1M4ZQ UL11T1M4ZQ UL12T1M4ZQ UL13T1M4ZQ UL14T1M4ZQ UL15T1M4ZQ ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1T1M4ZQ UL21T1M4ZQ ST2-2T1M4ZQ UL22T1M4ZQ ST2-3T1M4ZQ UL23T1M4ZQ ST2-4T1M4ZQ UL24T1M4ZQ ST2-5T1M4ZQ UL25T1M4ZQ ST2-6T1M4ZQ UL26T1M4ZQ ST2-7T1M4ZQ UL27T1M4ZQ ST2-8T1M4ZQ UL28T1M4ZQ Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 DOUBLE POLE Straight p.c. terminals with bracket - p.c. mounting SINGLE POLE UL MODEL NO. Terminal numbers for reference only SINGLE POLE SINGLE POLE Key way POWER CKT. MODEL NO. Terminal numbers for reference only Key way DRY CKT. MODEL NO. UL MODEL NO. ST1-1L3S3V30B ST1-2L3S3V30B ST1-3L3S3V30B ST1-4L3S3V30B ST1-5L3S3V30B UL11L3S3V30Q UL12L3S3V30Q UL13L3S3V30Q UL14L3S3V30Q UL15L3S3V30Q ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1L3S3V30B UL21L3S3V30Q ST2-2L3S3V30B UL22L3S3V30Q ST2-3L3S3V30B UL23L3S3V30Q ST2-4L3S3V30B UL24L3S3V30Q ST2-5L3S3V30B UL25L3S3V30Q ST2-6L3S3V30B UL26L3S3V30Q ST2-7L3S3V30B UL27L3S3V30Q ST2-8L3S3V30B UL28L3S3V30Q Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 DOUBLE POLE APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE A ST SERIES - MINIATURE TOGGLE SWITCHES DOUBLE POLE Double pole SINGLE POLE Single pole SINGLE POLE UL MODEL NO. ST1-1L3S3AB ST1-2L3S3AB ST1-3L3S3AB ST1-4L3S3AB ST1-5L3S3AB UL11L3S3AQ UL12L3S3AQ UL13L3S3AQ UL14L3S3AQ UL15L3S3AQ ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1L3S3AB UL21L3S3AQ ST2-2L3S3AB UL22L3S3AQ ST2-3L3S3AB UL23L3S3AQ ST2-4L3S3AB UL24L3S3AQ ST2-5L3S3AB UL25L3S3AQ ST2-6L3S3AB UL26L3S3AQ ST2-7L3S3AB UL27L3S3AQ ST2-8L3S3AB UL28L3S3AQ Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 DOUBLE POLE Vertical right angle p.c. terminals - p.c. mounting SINGLE POLE Key way DRY CKT. MODEL NO. Terminal numbers for reference only SINGLE POLE DOUBLE POLE Double pole SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Single pole Horizontal right angle p.c. terminals - p.c. mounting Terminal numbers for reference only A Key way DRY CKT. MODEL NO. UL MODEL NO. ST1-1L3S3V-1B ST1-2L3S3V-1B ST1-3L3S3V-1B ST1-4L3S3V-1B ST1-5L3S3V-1B UL11L3S3V-1Q UL12L3S3V-1Q UL13L3S3V-1Q UL14L3S3V-1Q UL15L3S3V-1Q ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1L3S3V-1B UL21L3S3V-1Q ST2-2L3S3V-1B UL22L3S3V-1Q ST2-3L3S3V-1B UL23L3S3V-1Q ST2-4L3S3V-1B UL24L3S3V-1Q ST2-5L3S3V-1B UL25L3S3V-1Q ST2-6L3S3V-1B UL26L3S3V-1Q ST2-7L3S3V-1B UL27L3S3V-1Q ST2-8L3S3V-1B UL28L3S3V-1Q Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 DOUBLE POLE APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A49 ST SERIES - MINIATURE TOGGLE SWITCHES Single pole Snap-in bezel with outboard LED PATENT NO. Des. 282,524 Double pole UL11KMZQJ6128 USA marking on opposite side POWER CKT. MODEL NO. UL MODEL NO. ST1-1KMZQJ6122 ST1-2KMZQJ6122 ST1-3KMZQJ6122 ST1-4KMZQJ6122 ST1-5KMZQJ6122 UL11KMZQJ6122 UL12KMZQJ6122 UL13KMZQJ6122 UL14KMZQJ6122 UL15KMZQJ6122 ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1KMZQJ6122 UL21KMZQJ6122 ST2-2KMZQJ6122 UL22KMZQJ6122 ST2-3KMZQJ6122 UL23KMZQJ6122 ST2-4KMZQJ6122 UL24KMZQJ6122 ST2-5KMZQJ6122 UL25KMZQJ6122 ST2-6KMZQJ6122 UL26KMZQJ6122 ST2-7KMZQJ6122 UL27KMZQJ6122 ST2-8KMZQJ6122 UL28KMZQJ6122 Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 Above models have black bezel and insert. Terminal numbers for reference only Panel thickness range .047" to .125". Single pole Snap-in bezel with 0, 1 or 2 inboard LEDs Double pole PATENT NO. Des. 282,524 ST1-1KMZQJ9128 USA marking on opposite side POWER CKT. MODEL NO. UL MODEL NO. ST1-1KMZQJ9122 ST1-2KMZQJ9122 ST1-3KMZQJ9122 ST1-4KMZQJ9122 ST1-5KMZQJ9122 UL11KMZQJ9122 UL12KMZQJ9122 UL13KMZQJ9122 UL14KMZQJ9122 UL15KMZQJ9122 ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1KMZQJ9122 UL21KMZQJ9122 ST2-2KMZQJ9122 UL22KMZQJ9122 ST2-3KMZQJ9122 UL23KMZQJ9122 ST2-4KMZQJ9122 UL24KMZQJ9122 ST2-5KMZQJ9122 UL25KMZQJ9122 ST2-6KMZQJ9122 UL26KMZQJ9122 ST2-7KMZQJ9122 UL27KMZQJ9122 ST2-8KMZQJ9122 UL28KMZQJ9122 Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 Above models have black bezel and insert. Terminal numbers for reference only A50 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE A ST SERIES - MINIATURE TOGGLE SWITCHES Single pole Bezel for p.c. mounted switches with 0, 1 or 2 LEDs Double pole ST1-1KMCBJ9488 USA marking on opposite side DRY CKT. MODEL NO. UL MODEL NO. ST1-1KMCBJ9422 ST1-2KMCBJ9422 ST1-3KMCBJ9422 ST1-4KMCBJ9422 ST1-5KMCBJ9422 UL11KMCQJ9422 UL12KMCQJ9422 UL13KMCQJ9422 UL14KMCQJ9422 UL15KMCQJ9422 ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1KMCBJ9422 UL21KMCQJ9422 ST2-2KMCBJ9422 UL22KMCQJ9422 ST2-3KMCBJ9422 UL23KMCQJ9422 ST2-4KMCBJ9422 UL24KMCQJ9422 ST2-5KMCBJ9422 UL25KMCQJ9422 ST2-6KMCBJ9422 UL26KMCQJ9422 ST2-7KMCBJ9422 UL27KMCQJ9422 ST2-8KMCBJ9422 UL28KMCQJ9422 Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 Above models have black bezel and insert. Terminal numbers for reference only PATENT NO. Des. 282,524 ST1-1KMV30QJ9488 Single pole Bezel for p.c. mounted switches with 0, 1 or 2 LEDs Double pole SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PATENT NO. Des. 282,524 A USA marking on opposite side DRY CKT. MODEL NO. UL MODEL NO. ST1-1KMV30BJ9422 ST1-2KMV30BJ9422 ST1-3KMV30BJ9422 ST1-4KMV30BJ9422 ST1-5KMV30BJ9422 UL11KMV30QJ9422 UL12KMV30QJ9422 UL13KMV30QJ9422 UL14KMV30QJ9422 UL15KMV30QJ9422 ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1KMV30BJ9422 UL21KMV30QJ9422 ST2-2KMV30BJ9422 UL22KMV30QJ9422 ST2-3KMV30BJ9422 UL23KMV30QJ9422 ST2-4KMV30BJ9422 UL24KMV30QJ9422 ST2-5KMV30BJ9422 UL25KMV30QJ9422 ST2-6KMV30BJ9422 UL26KMV30QJ9422 ST2-7KMV30BJ9422 UL27KMV30QJ9422 ST2-8KMV30BJ9422 UL28KMV30QJ9422 Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 Above models have black bezel and insert. Terminal numbers for reference only APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A51 ST SERIES - MINIATURE TOGGLE SWITCHES Single pole Bezel for right angle p.c. mtd. switches with 0, 1 or 2 LEDs PATENT NO. Des. 282,524 Poles SP SP DP DP Option A A-1 A A-1 Dim. A .148 .164 .250 .266 Double pole ST1-1KMA-1BJ9488 Dim. B .045 max. .095 max. .300 max. .350 max. USA marking on opposite side DRY CKT. MODEL NO. UL MODEL NO. ST1-1KMA-1BJ9422 ST1-2KMA-1BJ9422 ST1-3KMA-1BJ9422 ST1-4KMA-1BJ9422 ST1-5KMA-1BJ9422 UL11KMA-1QJ9422 UL12KMA-1QJ9422 UL13KMA-1QJ9422 UL14KMA-1QJ9422 UL15KMA-1QJ9422 ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1KMA-1BJ9422 UL21KMA-1QJ9422 ST2-2KMA-1BJ9422 UL22KMA-1QJ9422 ST2-3KMA-1BJ9422 UL23KMA-1QJ9422 ST2-4KMA-1BJ9422 UL24KMA-1QJ9422 ST2-5KMA-1BJ9422 UL25KMA-1QJ9422 ST2-6KMA-1BJ9422 UL26KMA-1QJ9422 ST2-7KMA-1BJ9422 UL27KMA-1QJ9422 ST2-8KMA-1BJ9422 UL28KMA-1QJ9422 Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 Above models have black bezel and insert. Terminal numbers for reference only ST1-1KMV-1BJ9488 Double pole PATENT NO. Des. 282,524 Single pole Bezel for right angle p.c. mtd. switches with 0, 1 or 2 LEDs USA marking on opposite side DRY CKT. MODEL NO. UL MODEL NO. ST1-1KMV-1BJ9422 ST1-2KMV-1BJ9422 ST1-3KMV-1BJ9422 ST1-4KMV-1BJ9422 ST1-5KMV-1BJ9422 UL11KMV-1QJ9422 UL12KMV-1QJ9422 UL13KMV-1QJ9422 UL14KMV-1QJ9422 UL15KMV-1QJ9422 ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1KMV-1BJ9422 UL21KMV-1QJ9422 ST2-2KMV-1BJ9422 UL22KMV-1QJ9422 ST2-3KMV-1BJ9422 UL23KMV-1QJ9422 ST2-4KMV-1BJ9422 UL24KMV-1QJ9422 ST2-5KMV-1BJ9422 UL25KMV-1QJ9422 ST2-6KMV-1BJ9422 UL26KMV-1QJ9422 ST2-7KMV-1BJ9422 UL27KMV-1QJ9422 ST2-8KMV-1BJ9422 UL28KMV-1QJ9422 Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 Above models have black bezel and insert. Terminal numbers for reference only A52 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE A ST SERIES - MINIATURE TOGGLE SWITCHES Snap-in bezel for round hole mounting with 0, 1 or 2 LEDs Single pole Self keying against rotation ST1-1KMZQJ9788 Double pole SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PATENT NO. Des. 282,524 A USA marking on opposite side POWER CKT. MODEL NO. UL MODEL NO. ST1-1KMZQJ9722 ST1-2KMZQJ9722 ST1-3KMZQJ9722 ST1-4KMZQJ9722 ST1-5KMZQJ9722 UL11KMZQJ9722 UL12KMZQJ9722 UL13KMZQJ9722 UL14KMZQJ9722 UL15KMZQJ9722 ON ON MOM ON ON NONE OFF OFF OFF NONE ON ON MOM MOM MOM ST2-1KMZQJ9722 UL21KMZQJ9722 ST2-2KMZQJ9722 UL22KMZQJ9722 ST2-3KMZQJ9722 UL23KMZQJ9722 ST2-4KMZQJ9722 UL24KMZQJ9722 ST2-5KMZQJ9722 UL25KMZQJ9722 ST2-6KMZQJ9722 UL26KMZQJ9722 ST2-7KMZQJ9722 UL27KMZQJ9722 ST2-8KMZQJ9722 UL28KMZQJ9722 Terminals connected (-6, -7 & -8) ON ON MOM ON ON ON ON MOM 1-2, 4-5 NONE OFF OFF OFF NONE ON ON ON 1-2, 5-6 ON ON MOM MOM MOM ON MOM MOM 2-3, 5-6 Above models have black bezel and insert. Terminal numbers for reference only Panel thickness range .047" to .125". MISCELLANEOUS ST2-6, -7 & -8 SWITCHES May be wired as a single pole 3 position switch; add external jumper between terminals 1 & 5, then Common terminal is 2 Output 1 - terminal 4 Output 2 - terminal 6 Output 3 - terminal 3 QUICK-CONNECT RECEPTACLES that are compatible with solder lug or p.c. terminals are commercially available - consult factory. FRONT PANEL SEAL: Silicone rubber boots for front panel sealing of the switch against high pressure water or other contaminants are available - see Waterproof switch sealing boots section of catalog. HARDWARE SUPPLIED (See Hardware section of catalog) Switches with M and Y option bushings are supplied with (2) A112 Hex Nuts, (1) A115 Lockwasher and (1) A107 Anti-rotate Ring. Switches with D bushings are supplied with (2) A112 Hex Nuts and (1) A115 Lockwasher. Switches with H option bushing are supplied with (1) A112 Hex Nut, (1) A115 Lockwasher and (1) A257 Gasket. Switches with M4 and M5 bushings are supplied with (2) A465 Hex Nuts, (1) A466 Lockwasher and (1) A482 Anti-rotateRing. Note: Switches with non-threaded bushings or bezels supplied without hardware. TYPICAL SWITCH CROSS SECTIONS Note: Contacts make opposite actuator direction. ON NONE ON ON OFF ON MOM OFF MOM ON OFF MOM ON NONE MOM APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A53 ST SERIES - MINIATURE TOGGLE SWITCHES A Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box with brief description - see option dwgs. & info. following. Note: 'NONE' indicates box may be left empty. Model Structure: Series Electrical functions Single pole: S T 1 S.P. UL model: U L 1 Double pole: S T 2 D.P. UL model: U L 2 Actuators 1 0N N0NE 0N 2 0N 0FF 0N 3 M0M 0FF M0M 4 0N 0FF M0M 5 0N M0M Following for DP only 6 0N 0N 0N 7 0N 0N M0M 8 M0M 0N M0M Note: When switch is ordered with a bezel, actuator selection may be K, L, L1, or L2 and bushing must be M only. Bushings K Standard bat F 1 Flatted F 2 Long flatted F 3 Short flatted L Long round L 1 Medium rnd. L 2 Short round L 3 Short round Following for M4 & M5 bushings only T 1 Large bat T 2 Long large bat T 3 T1 with keying T 4 T2 with keying M D H Y S S M M Terminations B Gold Z Solder lug Q Coin C Printed circuit silver W Wirewrap G Gold/ W 1 Lg. wirewrap coin W 3 Sht. wirewrap silver X Extra lg. wirewrap N EconHoriz. right angle p.c. omy gold terminals: T EconA omy silver A - 1 Vertical right angle p.c. terminals: V V - 1 V - 2 Straight p.c. terminals w/brkt.: V 3 0 V 3 1 V 4 0 V 4 1 V 7 0 V 8 0 V 7 1 V 8 1 Standard 1/4" thd'd. 'D' flat 1/4" thd'd. Splashproof 1/4" thd'd. Long 1/4" thd'd. 2 Non-threaded 3 Short non-thd'd. 4 15/32" thd'd. 5 M4 with 'o'-ring Options: Sealing Colored actuator* (NONE) E Epoxy Colored bushing* (NONE) (NONE) 2 Black 2 Black * colored actuator and bushing applicable to non-bezel models only Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. Bezel& Insert Bezel color (NONE) J 6 1 Snap-in w/LED J 9 0 Snap-in no LED J 9 1 Snap-in w/LED J 9 2 Snap-in w/2 LEDs J 9 3 p.c. no LED J 9 4 p.c. w/LED J 9 5 p.c. w/2 LEDs Self-keying round hole mt.: J 9 6 Snap-in no LED J 9 7 Snap-in w/LED J 9 8 Snap-in w/2 LEDs (NONE) 2 Black 6 Red 8 White Contact material Insert color Approvals (NONE) 2 Black 6 Red 8 White (NONE) / C S A Example of completely specified model number: UL15KMZQEJ9726/CSA SWITCH BODY SIZES WITH TERMINAL LOCATION SIDE VIEW SIDE VIEW SINGLE POLE DOUBLE POLE FRONT VIEW SINGLE AND DOUBLE POLE DIMENSIONS A54 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT ST SERIES - MINIATURE TOGGLE SWITCHES A SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ACTUATOR OPTIONS L F1 F2 F3 K LONG ROUND FLATTED LONG FLATTED SHORT FLATTED ROUND L3 T1 & T2 T3 & T4 L1 L2 (STANDARD) (FOR M4 & M5 BUSHINGS ONLY) Same as T1 & T2 respectively except with positive internal keying and sideways support to provide more ruggedness in harsh applications. MEDIUM ROUND SHORT ROUND SHORT ROUND Available only with M4 bushing LONG & SHORT ROUND BUSHING OPTIONS D H THREADED SPLASHPROOF S2 S3 M (STANDARD) Y THREADED LONG THREADED M4 & M5 M5 FEATURES '0'-RING FOR SPLASHPROOF APPLICATIONS NON THREADED NON THREADED ACTUATOR & BUSHING COMPATIBILITY TABLE WITH DIMENSIONS FOR SELECTIONS THREADED Bushing Option Bushing Dims. Dim A Dim B F1 F2 F3 L3 T1 T2 D H M Y .277 .290 .277 .330 .060 .060 .060 .040 N/A N/A .450 N/A N/A N/A .650 N/A N/A N/A .250 N/A .410 .410 .410 .410 .840 .840 .840 .840 .640 .640 .640 .640 .270 .270 .270 .270 .170 .170 .170 .170 N/A N/A N/A N/A N/A N/A N/A N/A S2 S3 .277 .177 .060 .060 .450 N/A .650 N/A .250 N/A .410 .510 .840 .940 .640 .740 .270 .370 .170 .270 N/A N/A N/A N/A M4 M5 .448 .448 - N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A .460 .460 .687 .687 N/A - NOT AVAILABLE Actuator length dimension C K L L1 L2 CONSULT FACTORY FOR SPECIAL REQUIREMENTS APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A55 ST SERIES - MINIATURE TOGGLE SWITCHES A A A-1 SINGLE POLE HORIZONTAL P.C. MOUNTING SINGLE POLE HORIZONTAL P.C. MOUNTING A A-1 DOUBLE POLE HORIZONTAL P.C. MOUNTING FRONT VIEW SINGLE POLE V, V-1 & V-2 Option V V-1 V-2 Dim. A .550 .500 .500 DOUBLE POLE HORIZONTAL P.C. MOUNTING FRONT VIEW DOUBLE POLE SIDE VIEW - SINGLE & DOUBLE POLE Dim. B .150 .150 .100 VERTICAL P.C. MOUNTING V30, V40, V70, V80, V31, V41, V71 & V81 PANEL LAYOUT V30, V31, V40 & V41 Option Dim. A V30-V31 .527 V40-V41 .647 Dim. B .024 .048 PANEL LAYOUT V70, V71, V80 & V81 Option V70-V71 V80-V81 Dim. A .630 .953 V31, V41, V71 & V81 ARE THE SAME AS V30, V40, V70 & V80 RESPECTIVELY, EXCEPT WITH CRIMPED LEG DESIGN FOR P.C. BOARD RETENTION, AS SHOWN TO RIGHT. A56 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE TERMINATION OPTIONS ST SERIES - MINIATURE TOGGLE SWITCHES A SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE TERMINATION OPTIONS (CONT'D.) Z C W W1 W3 SOLDER LUG PRINTED CIRCUIT WIREWRAP LONG WIREWRAP SHORT WIREWRAP X EXTRA LG. WIREWRAP CONTACT MATERIAL OPTIONS B Dry circuit - gold over nickel over brass. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 100,000 cycles min. (ST1-1 & ST2-1 only - other models 40,000 cycles min.) Q Power circuit - coin silver. RATING: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC (resistive loads). ELECTRIC LIFE: 100,000 cycles min. (ST1-1 & ST2-1 only - other models 40,000 cycles min.) G Dry circuit or power circuit - gold over nickel over coin silver. RATINGS & ELECTRIC LIFE: Same as B & Q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit, switch cannot be re-used in dry circuit. This option satisfies those customers who have both dry circuit and power circuit requirements, but prefer to inventory only one switch for both. N Dry circuit - gold over nickel over brass. Note- less gold than B option. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. T Power circuit - Silver plate over brass. RATING: 3 Amps at 125 VAC or 1.5 Amps at 250 VAC (resistive loads). ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. Solder dipped terminals and custom contact plating available - contact factory. UL & CSA OPTIONS UL For power circuits - coin silver RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Underwriter Laboratories file no. E66367. To specify, order UL model no. Note - applicable only to terminations with coin silver contacts (Q or G options). CSA For power circuits - coin silver RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Canadian Standards Association file no. LR54592-1. To specify, UL model number, then add '/CSA' to complete switch number. Note - applicable only to terminations with coin silver contacts (Q or G options) as CSA recognizes switches for power applications only. SEALING & MISCELLANEOUS OPTIONS E /R To specify reverse switch action on non-symmetrical models with bushing keyway, add '/R' to switch model no. Epoxy terminal sealing: Available with all terminal configurations. The space between terminal & case hole is sealed with epoxy all around terminal. Provides maximum protection from entry of flux or contaminants into the switch case. 22 Black finish is available on actuator, bushing & hardware. To specify, add '-22' to switch model no. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A57 ST SERIES - MINIATURE TOGGLE SWITCHES A PANEL CUT-OUTS Without keying With A107 anti-rotate ring With A158 anti-rotate ring With D bushing With slotted keyway bushings Cut-outs that accept non-threaded 1/4"bushings and 15/32" threaded bushings: Accepts all non-threaded 1/4" bushings A58 15/32" threaded bushings APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Cut-outs that accept all 1/4-40 threaded bushings: A FEATURES Designed for high rel defense, space and telecommunications applications. SPDT, DPDT, 3PDT & 4PDT models with 1/4-40 threaded bushing. Models for panel and p.c. mounting. Bright chrome or matte black finish on bushing, actuator and hardware. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Low level or mechanical life: Operating temperature range: Silver & gold plated silver; 2 Amps at 250 VAC, 4 Amps at 125 VAC or 4 Amps at 30 VDC. (Less than 100 mA 30 VDC to prevent damage to gold plating.) Gold rivet; 200 mA at 250 VAC or 400 mA at 125 VAC 10 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 2000 V rms min. - between poles and terminals and frame Silver: 50,000 cycles min. Gold plated silver: 20,000 cycles min. Gold rivet: 2 positions - 80,000 cycles min. 3 positions - 50,000 cycles min. 2 positions - 150,000 cycles min. 3 positions - 100,000 cycles min. -40C to +85C MATERIALS Contacts : Actuator: Bushing: Housing: Case: Terminal seal: Hardware: Silver, gold plated silver or solid gold rivet Chrome plated brass Nickel plated brass Nickel plated brass Diallyl phthalate (DAP) Epoxy Supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. AGENCY RECOGNITION CECC, LNZ, GAM T1, QPL (Europe), MUAHAG Availability: Consult factory for details of recognized models. Marking: To order switches marked CECC or ESA/SCC, complete the appropriate box of the ordering format. Other listings do not appear on the switches. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Option drawings PANEL CUT-OUTS 6.50 DIA 6.50 DIA (.255 DIA) (.255 DIA) 2.20 DIA 2.20 DIA (.086 DIA) (.086 DIA) 5.20 5.20 (.204) (.204) Standard 6.50 DIA 6.50 DIA (.255 DIA) (.255 DIA) 2.70 2.70 (.106)(.106) 1.10 (.043) 1.10 (.043) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 11000 SERIES - PROFESSIONAL TOGGLE SWITCHES With K sealing option APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A59 11000 SERIES - PROFESSIONAL TOGGLE SWITCHES 2.50 (.098) CIRCUIT 5.00 (.196) ON ON MOM MOM I II III EPOXY 8.00 (.314) 11.30 6.30 (.444) (.248) I II 26 III SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE OFF OFF OFF 13.40 (.527) 3 2 1 0.70 (.027) 4.00 (.157) ON ON MOM ON 14.00 (.551) 11136A 11139A 11137A 11138A Handle position (see dwg.): 6.35 DIA-40UNS (1/4-40UNS) 0.50 (.019) MODEL NO. 3.00 DIA (.118 DIA) Solder lug terminals - single pole - silver contacts 1 2 3 A Keyway I II III 5.00 (.196) EPOXY 11.30 6.30 (.444) (.248) 14.00 (.551) I 13.40 (.527) II 26" III 0.70 (.027) 1 2 4 5 3 6 4.00 (.157) ON ON MOM MOM 3 2 1 OFF OFF OFF 2.50 (.098) CIRCUIT ON ON MOM ON 6.00 (.236) 6.35 DIA-40UNS (1/4-40UNS) 0.50 (.019) 11146A 11149A 11147A 11148A Handle position (see dwg.): 14.00 (.551) MODEL NO. 3.00 DIA (.118 DIA) Solder lug terminals - double pole - silver contacts Keyway I III 4.30 (.169) Keyway ON ON MOM MOM I II III 11.30 5.70 (.444) (.224) 26.00 (1.023) I II 20 III Keyway A60 5.00 (.196) 6.00 (.236) 9 EPOXY 17.00 (.669) 3 2 1 OFF OFF OFF 6 4.30 (.169) 6.00 (.236) CIRCUIT ON ON MOM ON 14.00 (.551) 11166A 11169A 11167A 11168A Handle position (see dwg.): 7 8 6.35 DIA-40UNS (1/4-40UNS) 12.00 DIA (.472 DIA) MODEL NO. 3.00 DIA (.118 DIA) Solder lug terminals - four pole - silver contacts 4 5 4.00 (.157) II 20 2.50 (.098) III 7 8 10 11 9 12 4.00 (.157) II EPOXY 17.00 (.669) 0.50 (.019) I 11.30 5.70 (.444) (.224) 20.00 (.787) 5.00 (.196) 0.50 (.019) ON ON MOM MOM 3 2 1 OFF OFF OFF 2.50 (.098) CIRCUIT ON ON MOM ON 14.00 (.551) 11156A 11159A 11157A 11158A Handle position (see dwg.): 6.35 DIA-40UNS (1/4-40UNS) 12.00 (.472 DIA) MODEL NO. 3.00 DIA (.118 DIA) Solder lug terminals - three pole - silver contacts APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 11000 SERIES - PROFESSIONAL TOGGLE SWITCHES 11236A Handle position (see dwg.) : 1.00 (.039) 1.60 DIA (.062 DIA) CIRCUIT ON - ON I II III 9.50 (.374) 8.00 (.314) 4.00 (.157) EPOXY 11.30 6.30 13.40 (.444) (.248) (.527) 3 2 1 2 3 II 26 0.50 (.019) III 1 4.00 (.157) 14.00 (.551) I 0.70 (.027) 1.00 (.039) CIRCUIT ON - ON I II III 9.50 (.374) 14.00 (.551) 11.30 6.30 (.444) (.248) 4.00 (.157) EPOXY 13.40 (.527) II 26 II ON III 11.30 5.70 (.444) (.224) 20.00 (.787) 9.50 (.374) II 20 III 0.50 (.019) 4.30 (.169) CIRCUIT ON - ON I II III 11.30 5.70 (.444) (.224) 26.00 (1.023) 7 8 6 9 1.60 DIA (.062 DIA) 4.00 (.157) 9.50 (.374) EPOXY 17.00 (.669) III 4.30 (.169) 7 8 10 11 9 12 4.00 (.157) II 20 0.50 (.019) 3 2 1 I Keyway 4 5 6.00 (.236) 3.00 DIA (.118 DIA) 6.35 DIA-40UNS (1/4-40UNS) 12.00 DIA (.472 DIA) 11266A Handle position (see dwg.): EPOXY 1.00 (.039) Keyway MODEL NO. 4.00 (.157) 17.00 (.669) 3 2 1 14.00 (.551) I Straight p.c. terminals - four pole - silver contacts 1.60 (.062 DIA) 4.00 (.157) I - 6 6.00 (.236) CIRCUIT ON 3 6.00 (.236) 6.35 DIA-40UNS (1/4-40UNS) 12.00 DIA (.472 DIA) 11256A Handle position (see dwg.) : 3.00 DIA (.118 DIA) Straight p.c. terminals - three pole - silver contacts 4 5 1.00 (.039) 0.70 (.027) Keyway MODEL NO. 0.50 (.019) III 1 2 4.00 (.157) 3 2 1 14.00 (.551) I 6.00 (.236) 11246A Handle position (see dwg.) : 1.60 DIA (.062 DIA) 6.00 (.236) MODEL NO. 6.35 DIA-40UNS (1/4-40UNS) 3.00 DIA (.118 DIA) Straight p.c. terminals - double pole - silver contacts 6.00 (.236) Keyway 14.00 (.551) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 6.35 DIA-40UNS (1/4-40UNS) 3.00 DIA (.118 DIA) Straight p.c. terminals - single pole - silver contacts A APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A61 ON I II III 10.60 (.417) 11.30 5.90 (.444) (.232) 5.00 (.196) 8.00 (.314) 2 3 II 26 III 1.10 (.043) Keyway 4.00 (.157) 13.80 (.543) 1 1.30 (.051) 14.00 (.551) I 1.00 (.039) 9.27 (.364) 3 2 1 Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE - 4.00 (.157) ON 5.08 (.200) 9.27 (.364) 0.40 (.015) CIRCUIT 11136WA Handle position (see dwg.) : 1.60 DIA (.062 DIA) 0.50 (.019) MODEL NO. EPOXY 6.35 DIA-40UNS (1/4-40UNS) 4.40 (.173) Horizontal right angle p.c. terminals - single pole - silver contacts 4.00 (.157) 3.00 DIA (.118 DIA) 11000 SERIES - PROFESSIONAL TOGGLE SWITCHES A Model Structure: Series Terminals & bushings Number of poles Electrical functions Terminals Contact materials 1 1 1 Solder lug or right angle terminals 2 Straight p.c. terminals (all models have 1/4-40 thd'd. bushing) 3 4 5 6 Single pole Double pole Three pole Four pole 6 9 7 8 ON ON MOM ON OFF OFF OFF ON ON MOM MOM (NONE) W Horizontal right angle p.c.- function 6, single pole only A Silver A D 2 Gold plated silver (2 microns) D Solid gold rivet Options: Sealing (NONE) G Matte black finish on bushing, actuator & hardware. Actuators (NONE) Epoxy sealed terminals std'd. K Front panel sealing with o-ring & gasket. (not avail. w/W) (NONE) Standard 2 6 Cylindrical (see actuator dwgs.) (NONE) Standard A62 (consult factory for details of approved models). 11136WAD2GFCECC SWITCH ACTION 1.70 (.066) Function 6 5.00 (.196) 9.00 (.354) 26 Cylindrical (NONE) C E C C L N Z Telecommunications G A M Military M U A H A G Q P L (Europe only) (NONE) F Tin plated terminals (p.c. only) TERMINALS 2.00 DIA (.078 DIA) 7.00 (.275) 11.30 (.444) 7.00 (.275) 3.00 DIA (.118 DIA) Approvals/listings Example of completely specified model number: Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. ACTUATOR OPTIONS Special options 1.20 (.047) Solder lug 9.50 (.374) Black finish (arrow indicates keyway) Other functions 1.00 (.039) 2.50 (.098) P.C. 1 2 3 1 2 3 1 2 3 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com 1 2 3 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 12000 SERIES - PROFESSIONAL TOGGLE SWITCHES A FEATURES Designed for high rel defense, space and telecommunications applications. DPDT, 3PDT & 4PDT models with 15/32-32 threaded bushing. Models for panel and p.c. mounting. Supplied with 2 Hex Nuts, 1 Locking Ring & 1 Lockwasher. Bright chrome or matte black finish on bushing, actuator and hardware. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Low level or mechanical life: Operating temperature range: Silver & gold plated silver; 2 Amps at 250 VAC, 4 Amps at 125 VAC or 4 Amps at 30 VDC. (Less than 100 mA 30 VDC to prevent damage to gold plating.) Gold rivet; 200 mA at 250 VAC or 400 mA at 125 VAC 10 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 2000 V rms min. - between poles and terminals and frame Silver: 50,000 cycles min. Gold plated silver: 20,000 cycles min. Gold rivet: 2 positions - 80,000 cycles min. 3 positions - 50,000 cycles min. 2 positions - 150,000 cycles min. 3 positions - 100,000 cycles min. -40C to +85C MATERIALS Contacts : Actuator: Bushing: Housing: Case: Terminal seal: Hardware: Silver, gold plated silver or solid gold rivet Chrome plated brass Nickel plated brass Nickel plated brass Diallyl phthalate (DAP) Epoxy Supplied with 2 Hex Nuts .551" (14mm) across flats and 1 Locking Ring. See hardware section of catalog. AGENCY RECOGNITION CECC, LNZ, GAM T1, QPL (Europe), MUAHAG Availability: consult factory for details of recognized models. Marking: to order switches marked CECC or ESA/SCC, complete the appropriate box of the ordering format. Other recognized marks do not appear on the switches. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models: b. Option drawings c. 'build your own switch' order format & miscellaneous APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A63 12000 SERIES - PROFESSIONAL TOGGLE SWITCHES EPOXY 10.90 (.429) Solder lug terminals - four pole - silver contacts II III 18.20 (.716 DIA) 1.00 (.039) 17.30 (.681) II III 18.20 DIA (.716 DIA) 1.00 (.039) 6.00 (.236) 7 8 10 11 9 12 EPOXY 13.70 (.539) Keyway 1 2 4 5 3 6 1.00 (.039) I III *Function 4: SP in DP case, See diagram at end of section. A64 10.90 (.429) II 28 6.00 DIA (.236 DIA) ON ON MOM MOM ON MOM MOM MOM 14.00 (.551) OFF OFF OFF ON ON ON ON 11.90 DIA-32UNS (15/32-32UNS) ON ON MOM ON ON ON MOM - Keyway 5.00 (.196) I CIRCUIT 13.70 (.539) 1 III Straight p.c. terminals - double pole - silver contacts EPOXY 3 2 I II 28 9 2 1 ON ON MOM MOM ON MOM MOM 6 3 OFF OFF OFF ON ON ON 6.00 DIA (.236 DIA) ON ON MOM ON ON ON MOM *Function 4: SP in DP case, See diagram at end of section. 12246A 12249A 12247A 12248A 12244A* 122441RA* 122442RA* 12245A Handle position (see dwg.) : 10.90 (.429) I CIRCUIT MODEL NO. 1 17.30 (.681) 26.00 (1.023) 11.90 DIA-32UNS (15/32-32UNS) 12166A 12169A 12167A 12168A 12164A* 121641RA* 121642RA* Handle position (see dwg.) : 5.00 (.196) 2.50 (.098) III 7 8 4.00 (.157) II 1.00 (.039) 2.50 (.098) I 18.20 DIA (.716 DIA) 6.00 DIA (.236 DIA) ON ON MOM MOM 11.90 DIA-32UNS (15/32-32UNS) OFF OFF OFF MODEL NO. 3 2 III ON ON MOM ON 4 5 4.00 (.157) 14.00 (.551) CIRCUIT II 28 14.00 (.551) 12156A 12159A 12157A 12158A Handle position (see dwg.) : Keyway 13.70 (.539) 9.50 (.374) 1.60 DIA (.062 DIA) EPOXY 6.00 (.236) 17.30 (.681) 6.00 (.236) 20.00 (.787) 4.00 (.157) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.00 (.196) I MODEL NO. 6.00 (.236) 1.00 (.039) 6.00 (.236) Solder lug terminals - three pole - silver contacts 6 0.50 (.019) *Function 4: SP in DP case, See diagram at end of section. 3 4.00 (.157) 18.20 DIA (.716 DIA) 4 5 0.50 (.019) III 1 2 0.50 (.019) III II 28 4.00 (.157) II 1 I I 2 ON ON MOM MOM ON MOM MOM MOM 6.00 DIA (.236 DIA) OFF OFF OFF ON ON ON ON Keyway 13.70 (.539) 3 CIRCUIT ON ON MOM ON ON ON MOM - 14.00 (.551) 12146A 12149A 12147A 12148A 12144A* 121441RA* 121442RA* 12145A Handle position (see dwg.) : 11.90 DIA-32UNS (15/32-32UNS) MODEL NO. 10.90 (.429) 17.30 (.681) 2.50 (.098) Solder lug terminals - double pole - silver contacts 0.50 (.019) A 12000 SERIES - PROFESSIONAL TOGGLE SWITCHES III Straight p.c. terminals - four pole - silver contacts II III III 18.20 DIA (.716 DIA) *Function 4: SP in DP case, See diagram at end of section. 10 11 9 12 1.00 (.039) 9.50 (.374) 1.60 (.062 DIA) 4.00 (.157) EPOXY TERMINALS ACTUATOR OPTIONS 6.00 DIA (.236 DIA) 7 8 6.00 (.236) I II 28 1.00 (.039) ON ON MOM MOM ON MOM MOM MOM 13.70 (.539) 6.00 (.236) OFF OFF OFF ON ON ON ON 6.00 (.236) 1.00 (.039) I CIRCUIT ON ON MOM ON ON ON MOM - 4.00 (.157) EPOXY Keyway 10.90 (.429) 6.00 DIA (.236 DIA) 12266A 12269A 12267A 12268A 12264A* 122641RA* 122642RA* 12265A Handle position (see dwg.) : 9.50 (.374) 17.30 (.681) 26.00 (1.023) 14.00 (.551) MODEL NO. 1.60 (.062 DIA) 6.00 (.236) III 1.00 (.039) 4.00 (.157) II 9 0.50 (.019) I 18.20 (.716 DIA) 6 2 1 ON ON MOM MOM 7 8 6.00 (.236 DIA) OFF OFF OFF 11.90 DIA -32UNS (15/32-32UNS) ON ON MOM ON 4 5 4.00 (.157) CIRCUIT 11.90 DIA-32UNS (15/32-32UNS) 12256A 12259A 12257A 12258A Handle position (see dwg.) : 11.90 (.468) 1.20 (.047) 13 Standard 12 Short lever 9.50 (.374) 5.00 (.196) 11.80 (.464) 17.30 (.681) 1.70 (.066) 5.00 DIA (.196 DIA) 11.90 (.468) 1.00 (.039) 2.50 (.098) Solder lug P.C. LOCKING ACTUATOR OPTIONS (arrow indicates keyway ) 1V 1 locked position (function 6) 2V 2 locked positions (function 6) 20.60 (.811) 7.00 DIA (.275) 11.90 (.468) 19.40 (.763) 7.00 (.275 DIA DIA) 11.90 (.468) 19.40 (.763) 7.00 (.275 DIA DIA) 11.90 (.468) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. II 28 0.50 (.019) 14.00 (.551) I Keyway 13.70 (.539) 2 1 10.90 (.429) 3 17.30 (.681) 20.00 (.787) 3 Straight p.c. terminals - three pole - silver contacts A 3V 3 locked positions (functions 9 & 4) Security Guards available - see Miscellaneous & Accessories section D. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A65 12000 SERIES - PROFESSIONAL TOGGLE SWITCHES A Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Terminals & bushings Number of poles Electrical functions Momentary for function 4 Contact materials 1 2 (NONE) 6 ON ON A Silver 1 R ON ON MOM 9 ON OFF ON A D 2 Gold plated 2 R MOM ON MOM 7 MOM OFF MOM silver (2 microns) 8 ON OFF MOM D Solid gold rivet 5 ON MOM 4 ON ON ON 4* ON ON MOM Example of completely specified 4* MOM ON MOM model number: * specify selection from 'Mom. for function 4' box also 121442RAD2GFCECC (For double & four pole only) 4 Double pole 5 Three pole 6 Four pole 1 Solder lug or terminals 2 Straight p.c. terminals (all models have 15/32-32 thd'd. bushing) Options: Black finish Sealing (NONE) G Matte black finish on bushing, actuator & hardware. Actuators Special options (NONE) Standard 1 2 Short 1 V Locking (1 position) 2 V Locking (2 positions) 3 V Locking (3 positions) (see actuator dwgs.) (NONE) Epoxy sealed terminals std'd. K Front panel sealing with o-ring & gasket. Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. Agency Recognition (NONE) C E C C L N Z Telecommunications G A M Military M U A H A G Q P L (Europe only) (NONE) F Tin plated terminals (p.c. only) (consult factory for details of approved models). MISCELLANEOUS SWITCH ACTION (arrow indicates keyway) PANEL CUT-OUTS 12.50 DIA (.492 DIA) 12.00 DIA (.472 DIA) 1.70 (.066) 3.50 DIA (.137 DIA) 9.60 (.377) 5.10 (.200) 1 Standard With K sealing option WIRING for function 4 switch 6 III 4 3 1 Function 6 6 5 II 5 I 4 4 S.4 I 3 6 9 12 3 6 9 12 3 6 9 12 2 5 8 11 2 5 8 11 2 5 8 11 4 7 10 3 Other functions E 1 2 Below diagrams are viewed from bottom of switch. 6 5 2 1 4 7 10 1 4 7 10 5 S.1 II S.3 III S.10I TH E 11 S.7 II S.9 III Equivalent to single pole 3 throw switch. Dotted lines between terminals 2 & 6 and 8 & 12 indicate external jumpers to be added by customer. A66 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES A FEATURES Designed for high reliability environments. Double shell case for high mechanical strength & high electrical insulation. Pinned actuator for ruggedness and permanent grounding to switch bushing. Panel sealed to IP 67 and fully sealed switch body. DPDT, 3PDT & 4PDT models with 15/32-32 threaded bushing with flat. Highly reliable for low level or power applications. Matte black finish on body, bushing, actuator and hardware. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Environmental: 2 Amps at 250 VAC, 4 Amps at 125 VAC or 4 Amps at 28 VDC. (Less than 300 mA at 28 VDC to prevent damage to gold plating). Minimum load - 10 mA at 50 mV, 10A at 5 VDC 10 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 2000 V rms min. - between poles and terminals and frame At 2 Amps 250 VAC or 4 Amps at 28 VDC - 20,000 cycles min. (10,000 for functions 4 & 5) At low level (10 mA 50 mV) - 40,000 cycles min. (20,000 for functions 4 & 5) -40C to +85C Shock: 50g - 11 ms (IEC 68-2-27). Vibration: 10-500 Hz - 10 g (IEC 68-2-6). Salt spray: 96 hrs.(IEC 68-2-11) Humidity: 56days,93% R.H.,40C (IEC 68-2-3). MATERIALS Contacts : Actuator: Bushing: Case: Hardware: Solid rivet - gold plated silver/nickel alloy Black chrome plated brass Black chrome plated brass Diallyl phthalate (DAP) with plastic external shell, epoxy sealed Supplied with 1 Hex Nut with black finish. See drawing at end of section. AGENCY RECOGNITION CECC, GAM , QPL (Europe), MUAHAG & DAT (French defense military). Marking: Many models have full CECC recognition and are marked CECC. Consult factory for list of recognized models. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. Option drawings c. 'build your own switch' order format d. Miscellaneous and Positions & Connections APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A67 12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES 16.00 (.629) 17.30 (.681) 10.40 (.409) Flat I 8 Maxi (.314 MAX) 15.10 (.594) 1.50 (.059) 11.90-32UNS (15/32-32UNS) 22.00 (.866) 17.30 (.681) Flat 10.40 (.409) 0.50 (.019) Solder lug terminals - three pole ON ON MOM ON I OFF OFF OFF ON ON MOM MOM II III II28 III 8 Maxi (.314 MAX) 15.10 (.594) 1.50 (.059) 11.90 DIA-32UNS (15/32-32UNS) 6.00 (.236) 17.30 (.681) 10.40 (.409) Flat 0.50 (.019) 28.10 (1.106) Solder lug terminals - four pole I ON ON MOM MOM ON MOM MOM II III II 28 III 8 Maxi (.314 MAX) 15.10 (.594) 4.10 (.161) 1.50 (.059) 11.90 DIA-32UNS (15/32-32UNS) 16.00 (.629) Straight p.c. terminals - double pole EPOXY 2.50 (.098) OFF OFF OFF ON ON ON 6.00 (.236) ON ON MOM ON ON ON MOM 6.00 DIA (.236 DIA) 12166X778 12169X778 12167X778 12168X778 12164X778 121641RX778 121642RX778 Handle position (see dwg.): CIRCUIT 16.00 (.629) I MODEL NO. EPOXY 4.10 (.161) 2.50 (.098) CIRCUIT 6.00 DIA (.236 DIA) 12156X778 12159X778 12157X778 12158X778 Handle position (see dwg.): 16.00 (.629) I MODEL NO. EPOXY 4.10 (.161) 17.30 (.681) Flat 10.40 (.409) II III III 8 Maxi (.314 MAX) 6.00 DIA (.236 DIA) 11.90 DIA-32UNS (15/32-32UNS) A68 8.60 (.338) 15.10 (.594) EPOXY 4.00 (.157) ON 4.00 (.157) 1.50 (.059) 6.00 (.236) - II 28 1.00 (.039) CIRCUIT 6.00 (.236) 12246X778 ON Handle position (see dwg.): I 16.00 (.629) I MODEL NO. 1.60 DIA (.062 DIA) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE III III 4.00 (.157) II II 28 28" 4.00 (.157) ON ON MOM MOM ON MOM MOM MOM 6.00 (.236) I OFF OFF OFF ON ON ON ON 2.50 (.098) ON ON MOM ON ON ON MOM - 6.00 (.236 DIA) 12146X778 12149X778 12147X778 12148X778 12144X778 121441RX778 121442RX778 12145X778 Handle position (see dwg.): CIRCUIT 16.00 (.629) MODEL NO. 4.00 (.157) Solder lug terminals - double pole 0.50 (.019) A 12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES Straight p.c. terminals - three pole 17.30 (.681) 22.00 (.866) A Flat 10.40 (.409) II III III 8 Maxi (.314 MAX) EPOXY 4.00 (.157) 1.50 (.059) 6.00 DIA (.236 DIA) 11.90 DIA-32UNS (15/32-32UNS) 8.60 (.338) 15.10 (.594) 4.00 (.157) ON 6.00 (.236) - II 28 1.00 (.039) CIRCUIT 12256X778 ON Handle position (see dwg.): I 1.60 DIA (.062 DIA) 6.00 (.236) 17.30 (.681) 28.10 (1.106) Straight p.c. terminals - four pole 10.40 (.409) Flat 12266X778 Handle position (see dwg): CIRCUIT ON - ON I II III II28 III 8 Maxi (.314 MAX) 8.60 (.338) 15.10 (.594) EPOXY 4.00 (.157) MODEL NO. 16.00 (.629) I 4.00 (.157) 6.00 (.236) 1.50 (.059) 1.00 (.039) 6.00 (.236) 6.00 DIA (.236 DIA) 11.90 DIA-32UNS (15/32-32UNS) 2.50 (.098) 1.00 (.039) 11.90 (.468) 1.20 (.047) 8.60 (.338) 4.10 (.161) 1.70 (.066) 5.00 DIA (.196 DIA) 11.80 (.464) 17.30 (.681) 1.60 DIA (.062 DIA) TERMINALS ACTUATOR OPTIONS 6.00 DIA (.236 DIA) 11.90 (.468) (NONE) Standard 12 Short 1 Solder lug 2 P.C. LOCKING ACTUATOR OPTIONS (arrow indicates flat) 1V 1 locked position (function 6) 2V 2 locked positions (function 6) 20.60 (.811) 7.00 DIA (.275) 11.90 (.468) 19.40 (.763) 7.00 (.275 DIA DIA) 11.90 (.468) 19.40 (.763) 7.00 (.275 DIA DIA) 11.90 (.468) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 16.00 (.629) I 3V 3 locked positions (functions 9 & 4) Security Guards available - see Miscellaneous & Accessories section D. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A69 12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES A Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Terminals & bushings Number of poles Electrical functions Momentary for function 4 1 2 4 Double pole 5 Three pole 6 Four pole 1 Solder lug or terminals 2 Straight p.c. terminals (all models have 15/32-32 thd'd. bushing) (NONE) 6 ON ON 1 R ON ON MOM 9 ON OFF ON 2 R MOM ON MOM 7 MOM OFF MOM 8 ON OFF MOM 5 ON MOM 4 ON ON ON 4* ON ON MOM 4* MOM ON MOM * specify selection from 'Mom. for function 4' box also Options: Actuators Special options X (NONE) Standard 1 2 Short 1 V Locking (1 position) 2 V Locking (2 positions) 3 V Locking (3 positions) (see actuator dwgs.) 7 7 Approvals/listings 8 (NONE) C E C C (consult factory for details of approved models). High performance Example of completely specified model number: 121442R3VX778CECC Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. MISCELLANEOUS PANEL CUT-OUT 12.00 DIA (.472 DIA) STANDARD HARDWARE 5.10 (.200) 14.00 (.551) 2.30 (.090) SWITCH ACTION (arrow indicates flat) 11.9 DIA-32UNS (15/32-32UNS) U41 Hex Nut - matte black Function 6 A70 4 3 -1 2 Other functions 3 1 2 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT 12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES A SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE POSITIONS AND CONNECTIONS Function Lever position & connections I II III (flat) 12146 ON - (1-3)-4 (5-7)-8 Terminal identification Wiring for 3 way switches (function 4) ON (1-3)-2 (5-7)-6 6 2 7-5 3-1 8 4 Arrow indicates external jumper added by customer. 3 12147 12148 12149 12148CT MOM ON ON MOM 1-2 4-5 OFF OFF OFF OFF MOM MOM ON ON 1-3 4-6 12145 - ON 1-2 4-5 MOM 1-3 4-6 ON ON ON 1-3 4-5 ON ON MOM 1-3 4-6 Flat 1 2 12144 6 4 5 2 5 1 4 3 6 3 1 121441R 2 6 12144 121441R 121442R ON MOM MOM 1-2 4-5 12156 ON (1-3)-4 (5-7)-8 (9-11)-12 ON (1-3)-2 (5-7)-6 (9-11)-10 ON 1A-3A 1C-3C 1E-3E 1G-3G ON 1A-2A 1C-2C 1E-2E 1G-2G 4 5 3 12166 - 1 2 10 3-1 9-11 4 12 ON 1A-2A 1C-2C 1E-2E 1G-2G ON 1A-2A 1C-3C 1E-2E 1G-3G ON 1A-3A 1C-3C 1E-3E 1G-3G 6 4 5 2A 1A 3A 2C 1C 3C A 12164 2 121442R C E 12164 G 2 2 1 1 3 3 2E 1E 3E 2G 1G 3G APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A71 FEATURES VDE frequent duty listing standard on all models. DPDT panel mounting models with solder lugs or p.c. terminals. Knee action quick-break toggle mechanism. Insulated actuator & bushing with actuator color options. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive): Operating temperature range: 3 Amps at 250 VAC, 6 Amps at 125 VAC or 30 VDC 10 milliohms maximum 1000 megohms min. at 500 VDC 2000 V rms min. - between terminals and between poles 50,000 cycles 3 Amps 250 VAC. 10,000 cycles 6 Amps 125 VAC or 30 VDC -20C to +55C MATERIALS Contacts: Actuator: Bushing: Case: Hardware: Silver inlay Polyamide 6-6 Polyamide 6-6 Phenolic resin Supplied with 1 Hex Nut p/n U166 and 1 insulating Knurled Nut p/n U520. Knurled Nut supplied same color as actuator. See hardware section of catalog. AGENCY RECOGNITION VDE (frequent duty),UL & CSA VDE, UL & CSA marking is standard. Note: Ideal switch for pump manufacturers. A72 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 4100 & 4200 SERIES - VDE APPROVED TOGGLE SWITCHES A 4100 & 4200 SERIES - VDE APPROVED TOGGLE SWITCHES 2.80x0.50 (.11x.019) ON ON 12.00 DIAx0.75 SI (.472DIAx0.75 IS) CIRCUIT OFF ON II 13.50 (.531) I 11.50 (.453) 7.20 (.283) 16.50 (.649) 8.00 (.315) 18.00 (.709) 5.80 (.228) DOUBLE POLE MODEL NO. 4141A22UU 4146A22UU Handle position (see dwg.) : II 1 4 5 2 8.40 (.33) 30 21.00 (.826) Above models have black actuator. 3 I 6 Keyway 1.20 (.047) 1.20x0.50 (.047x.019) Straight p.c. terminals - 4200 CIRCUIT OFF ON 13.50 (.531) II I 11.50 (.453) 16.50 (.649) 5.00 (.197) 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 8.00 (.315) 19.20 (.755) 5.80 (.228) ON ON 1 30 21.00 (.826) Above models have black actuator. 4 5 2 3 8.40 (.33) DOUBLE POLE MODEL NO. 4241A22UU 4246A22UU Handle position (see dwg.) : II I 6 Keyway OPTIONS & MISCELLANEOUS ACTUATOR COLORS The last numeric digit in above switch model numbers indicates actuator and knurled mounting nut color. Other selections: SWITCH ACTION Arrow indicates keyway PANEL CUT-OUTS 12.20 DIA (.48 DIA) 12.20 DIA (.48DIA) 12.50 DIA (.492DIA) blue black green grey yellow red white orange 5.10 (.20) 3.50 DIA (.137DIA) 1 2 9.60 (.377) Colors 1 2 3 4 5 6 7/1 9 1.70 (.066) 3 6.20 (.244) 5.00 (.196) 1.20 (.047) 2.40 (.094) TERMINALS 7.20 (.283) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Solder lug terminals - 4100 A 1.20x0.5 (.047x.019) 2.80x0.50 (.11x.019) Solder lug P. C. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A73 FEATURES High current & voltage ratings in small case. SPDT & DPDT panel mounting models with solder lug/quick-connect terminals. Insulated actuator & bushing with lever color options. SPECIFICATIONS Contact ratings: Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive): Operating temperature range: 4 Amps at 250 VAC, 6 Amps at 125 VAC (resistive loads) UL/CSA: 3 Amps at 250 VAC, 6 Amps at 125 VAC VDE: ON-OFF & ON-ON models only - 4(2)A 380 VAC 10 milliohms maximum 1000 megohms min. at 500 VDC 2000 V rms min. - between terminals and between poles 10,000 cycles minimum at full load -20C to +55C MATERIALS Contacts: Actuator: Bushing: Case: Hardware: Silver Polyamide 6-6 Polyamide 6-6 Melamine phenolic Supplied with 1 Hex Nut p/n U166 and 1 insulating Knurled Nut p/n U520. Knurled Nut supplied same color as actuator. See hardware section of catalog. AGENCY RECOGNITION VDE for functions ON-OFF & ON-ON. UL & CSA for all functions. Switches are supplied with recognized mark. A74 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 4600 SERIES - UL, CSA & VDE RECOGNIZED TOGGLE SWITCHES A 4600 SERIES - UL, CSA & VDE RECOGNIZED TOGGLE SWITCHES 11.50 (.452) 14.00 (.551) 7.20 (.283) III I 5.80 (.228) II 12.00 (.472) 13.50 (.531) 3 30 Above models have black actuator. II 2 8.40 (.33) III CIRCUIT OFF ON OFF ON 19.00 (.748) ON ON ON 0.50 (.019) SINGLE POLE MODEL NO. 4631A22UU 4636A22UU 4639A22UU Handle position (see dwg.) : 1 I 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 11.50 (.452) 15.00 (.590) 7.20 (.283) 2.80 (.11) Solder lug/quick-connect terminals - double pole 16.50 (.649) CIRCUIT ON OFF ON ON ON OFF ON 8.00 (.315) 5.80 (.228) 13.50 (.531) III I Above models have black actuator. II I 21.00 (.826) B6 0.50 (.019) II 30 III A3 A2 B5 B4 A1 8.40 (.33) DOUBLE POLE MODEL NO. 4641A22UU 4646A22UU 4649A22UU Handle position (see dwg.) : 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) OPTIONS & MISCELLANEOUS ACTUATOR COLORS The last '2' in above switch model numbers indicates actuator and knurled mounting nut color. Other selections: SWITCH ACTION Arrow indicates keyway PANEL CUT-OUTS 12.20 DIA (.48 DIA) 12.20 DIA (.48DIA) 12.50 DIA (.492DIA) blue black green grey yellow red white orange 5.10 (.20) 3.50 DIA (.137DIA) 3 2 9.60 (.377) Colors 1 2 3 4 5 6 7/1 9 1.70 (.066) 1 Panel thickness: .196" (5mm) max. between 2 nuts To specify P.C. terminals replace 46 with 44 in part no.example: 4631A22UU becomes 4431A22UU 6.20 (.244) 5.00 5.00 (.196) (.196) 1.20 (.047) 2.40 (.094) TERMINALS 7.20 (.283) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 2.80 (.11) Solder lug/quick-connect terminals - single pole A 2.80x0.50 (.11x.019) Solder lug/quick-connect 1.20x0.5 1.20x0.5 (.047x.019) (.047x.019) P.C. terminal APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A75 FEATURES High current & voltage ratings in small case. SPDT panel mounting models with solder lug or quick-connect terminals. Insulated actuator & bushing with lever color options. SPECIFICATIONS Contact ratings & life: 6 Amps at 250 VAC (10,000 cycles), 10 Amps at 125 VAC (6,000 cycles). (Above loads are resistive) 10 milliohms maximum 1000 megohms min. at 500 VDC 2000 V rms min. - between terminals and between terminals & metal panel -20C to +55C 0.95 Nm (.700 ft. lb.) between 2 nuts 4.5 mm (.177") between 2 nuts Initial contact resistance: Insulation resistance: Dielectric strength: Operating temperature range: Torque: Panel thickness: MATERIALS Silver Polyamide Polyamide Polyamide Supplied with 1 Hex Nut p/n U166 and 1 Knurled Nut p/n U411. See hardware section of catalog. I Solder lug or quick-connect (.185"x.031") terminals A76 18.80 (.74) 4.70x0.80 (.185x.031) QUICK CONNECT 3.50 DIA (.137 DIA) (.472) 12.00 SWITCH ACTION 12.50 DIA (.492 DIA) 12.50 DIA (.492 DIA) 5.10 (.200) 7.00 (.275) 12.50 DIA (.492 DIA) 10.50 (.413) 9.50 (.374) 7.00 (.275) 5.20 (.204) 7.00 (.275) 9.60 (.377) 2.80x0.80 (.11x.031) SOLDER LUG 12.00DIAx0.75 SI (.472DIAx0.75 IS) III PANEL CUT-OUTS 3.10 (.122) 1.30 (.051) 6.00DIA (.236DIA) OFF ON ON Above models have black actuator - consult factory for other actuators and colors. TERMINALS III 15.00 (.59) MODEL NUMBER SOLD. LUG QUICK-CON. CIRCUIT 1531A2L12 1531A8L12 ON 1536A2L12 1536A8L12 ON 1539A2L12 1539A8L12 ON OFF Handle position (see dwg.) : I II II 30 7.00 (.275) Contacts: Actuator: Bushing: Case: Hardware: 1.70 (.066) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ! New 1500 SERIES - TOGGLE SWITCHES W/INSULATED LEVER & BUSHING 5.20 (.204) A SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ! New 6000 SERIES - TOGGLE SWITCHES FOR MILITARY APPLICATIONS A FEATURES 1, 2, 3 & 4 pole models for military applications include portable measuring equipment generators, beacons and fixed and mobile radiotransmitters. AIR 8461 (maintenance only). Sealing and locking lever applications. Matte black finish on actuator and bushing. SPECIFICATIONS Contact ratings (voltage/current): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Torque: Panel thickness: 30VDC 250VAC Resistive load 6.5A 5A Inductive load 5A 3A Lamp load 3A 1A 10 milliohms maximum at 1A 2VDC 1000 megohms min. at 500 VDC 2000 V rms min. - between terminals 3000 V rms min. - between terminals and frame 10,000 cycles at full load. -40C to +85C 1.50 Nm (1.10 ft.lb.) max. applied to nut 5 mm (.196") max. 125VAC 10A 6A 3A 115V 400Hz 7A 5A 3.5A MATERIALS Contacts : Actuator: Bushing: Case: Hardware: Silver Black, chrome plated brass Black, chrome plated brass Diallylphthalate (DAP) Supplied with 2 matte black nuts (U41), matte black locking ring (U12) and zinc plated lockwasher (U13). (See hardware section of catalog). ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. Options & miscellaneous APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A77 ! New 6000 SERIES - TOGGLE SWITCHES FOR MILITARY APPLICATIONS Double pole, screw terminals (note: APEM models not MIL approved as of catalog printing.) Double pole, solder lug terminals Four pole, screw terminals APEM MIL S3950 APEM MIL S3950 APEM MIL S3950 664103LM 664203LM 664303LM 664403LM 664603LM 664703LM 664803LM 664903LM MS35059-22 MS35059-29 MS35059-30 MS35059-26 MS35059-23 MS35059-27 MS35059-31 MS35059-21 664103LM/2 664203LM/2 664303LM/2 664403LM/2 664603LM/2 664703LM/2 664803LM/2 664903LM/2 MS35059-9 MS35059-10 MS35059-11 MS35059-17 MS35059-15 MS35059-18 MS35059-19 MS35059-16 666103LM 666103LM 666103LM 666103LM 666103LM 666103LM 666103LM 666103LM MS25068-26 MS25068-23 MS25068-27 MS25068-31 MS25068-21 Single pole -screw terminals Keyway 17.50 (.689) ON II - 14.00 (.551) II OFF 17.00 (.669) I 6421A03LM 21.00 (.826) 30 Model No. 11.00 (.433) I 11.90DIA 32NS (15/32" 32NS) ON ON MOM ON MOM ON MOM ON ON ON OFF OFF OFF 17.50 (.689) OFF mom.OFF OFF ON ON ON MOM MOM ON 11.50 (.453) 19.50 (.767) 27.50 (1.082) I II III 11.90DIA 32NS (15/32" 32NS) 1 4 2 5 3 6 10.00 10.00 (.393) (.393) 664103LM 664203LM 664303LM 664403LM* 664503LM 664603LM 664703LM 664803LM 664903LM Keyway I 2-3 5-6 33.60 (1.323) II Model No. III 2-1 5-4 36 Double pole - screw terminals * - Function 4: SP in DP case. See specs. for 600H & 600NH series. Three pole - screw terminals Keyway OFF OFF OFF Double pole - screw terminals III Model No. 2-1,5-4, 8-7,11-10 666103LM 666203LM 666303LM 666403LM* 666503LM 666603LM 666703LM 666803LM 666903LM ON ON MOM ON MOM ON MOM ON ON II * - Function 4: SP in DP case. See specs. for 600H & 600NH series. A78 II 1 4 7 2 5 8 III 11.90DIA 32NS (15/32" 32NS) 3 12.00 (.472) 9 6 12.00 (.472) Keyway I OFF mom.OFF OFF ON ON ON MOM MOM ON 34.50 (1.358) I OFF mom.OFF OFF ON ON MOM MOM ON 17.50 (.689) 2-3,5-6, 8-9,11-12 ON OFF OFF OFF 32.00 (1.26) 34.00 (1.338) ON ON MOM MOM ON MOM ON ON 11.50 (.453) 11.50 (.453) 46.50 (1.83) 32.00 (1.26) 1 4 7 10 2 5 8 11 I II III 11.90DIA 32NS (15/32" 32NS) 3 9 6 11.00 11.00 (.433) (.433) 34.00 (1.338) 665103LM 665203LM 665303LM 665503LM 665603LM 665703LM 665803LM 665903LM 17.50 (.689) I 2-3 5-6 8-9 30 II Model No. III 2-1 5-4 9-7 12 11.00 (.433) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE CORRESPONDING AMERICAN SPECIFICATIONS 30 A ! New 6000 SERIES - TOGGLE SWITCHES FOR MILITARY APPLICATIONS A OPTIONS & MISCELLANEOUS SEALING K Front of switch sealed with 'o'-ring and sealing washer. Protects switch against water and dust. Panel seal withstands 1 bar pressure and remains sealed when switch is operated. 1V 2 20.60 (.811) 19.40 (.763) Keyway 11.90DIA 32NS (15/32'' 32NS) (1 locked position) 2V 11.90 (.468) 11.90 (.468) 11.90DIA 32NS (15/32'' 32NS) (2 locked positions) 3V TERMINALS (3 locked positions) 1.60DIA (.062DIA) 2.50 (.098) 2.50DIA (.098DIA) 6.50 (.255) Blank Screw terminals. /2 Solder lug terminals. /3 Quick-connect terminals 6.35 x 0.8 mm (.250" x .031"). Note: /2 and /3 not available on single pole models. 8.00 (.314) 11.90DIA 32NS (15/32'' 32NS) 1 Note: cannot be specified with LM option above. 19.40 (.763) LOCKING LEVERS 11.90 (.468) 6.35x0.80 (.25x.031) 5.00DIA (.196DIA) /2 /3 NEOPRENE PROTECTION CAPS For insulating terminals against electrical short circuit. Single pole U58 Double pole U120 Three pole U46 Four pole U47 Order separately - example: Protection Cap U58 3.50 DIA 3.50 DIA (.137 DIA) (.137 DIA) 3 Max (.118 Max) 12.50 DIA 12.50 DIA (.492 DIA) (.492 DIA) 12.50 DIA 12.50 DIA (.492 DIA) (.492 DIA) 5.10 (.200) 12.50 DIA 12.50DIA) DIA (.492 (.492 DIA) PANEL CUT-OUT WITH 'K' SEALING 1.70 1.70 (.066) (.066) U60 Recommended mounting depending on panel tk'ness. SWITCH CROSS SECTIONS Indicates keyway 1 pole Security Guards available - see Miscellaneous & Accessories section D. 2,3 & 4 pole 1 2 4 Max (.157 Max) PANEL CUT-OUTS 9.60 (.377) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE FINISHES B Gray satin chrome actuator and bushing. LM Nickel plated bushing and bright chrome plated actuator and top nut. 8 Matte black actuator with fluorescent tip. 3 2 1 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A79 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ! New 3600NF SERIES - SEALED TOGGLE SWITCHES FOR OUTSIDE APPLICATIONS FEATURES Multiple seals - 'o' ring between lever & bushing, mounted half length boot & nylon washer, case/covergasket, sealing washer and molded-in terminal inserts SPDT & DPDT panel mounting models with screw or solder lug/quick-connect terminals. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive): Operating temperature range: Torque: Panel thickness: 12A 28VDC, 6A 250VAC 10 milliohms maximum at 1 amp 2 VDC 1000 megohms min. at 500 VDC 2500 V rms min. - between terminals, 3000 V rms min - between terminals & metal frame 10,000 cycles minimum at full load -40C to +85C 1.50 Nm (1.10 ft. lb.) applied to nut 5 mm (.196") max. MATERIALS Contacts: Actuator: Bushing: Case: Hardware: Silver Nickel plated brass Nickel plated brass Phenolic Supplied with 1/2 length sealing boot & nylon washer, 1 sealing washer & 1 nickel plated hex nut. AGENCY RECOGNITION Availability: consult factory for details of recognized models. PANEL CUT-OUTS 3.00DIAx0.50 SI (.118DIAx0.50 IS) Screw A80 12.50 DIA (.492 DIA) 6.35x0.80 (.25x.031) 12.50 DIA (.492 DIA) 3.50 DIA (.137 DIA) 5.10 (.200) 6.35 (.250) 4.50 (.177) 0.80 (.031) 12.50 DIA (.492 DIA) 9.20 (.362) 3.10DIA (.122DIA) 1.70 (.066) 9.60 (.377) TERMINALS 9.20 (.362) A A Sold. lug/Quick-connect APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com ! New 3600NF SERIES - SEALED TOGGLE SWITCHES FOR OUTSIDE APPLICATIONS Screw terminals - single pole 17.50 (.689) 10.50 (.413) 24.60 (.968) 9.20 (.362) 1 OFF ON ON MOM MOM ON 35.00 (1.378) II III I 2-1 III 4 I 6.35x0.80 (.25x.031) CIRCUIT ON MOM ON MOM OFF ON OFF ON OFF 30 MOD. NO 3631NF 3635NF 3636NF 3637NF 3638NF 3639NF Handle pos. (see dwg.) : II 2-3 12.00DIAx0.75 SI (.472DIAx0.75 IS) 2 5 3 6 21.50 (.846) Screw terminals - double pole pole 17.50 (.689) CIRCUIT ON ON ON MOM ON MOM OFF ON OFF ON OFF OFF ON ON ON MOM MOM ON I 2-1 5-4 II 2-3 5-6 24.60 (.968) 9.20 (.362) 1 4 35.00 (1.378) I II 6.35x0.80 (.25x.031) III 10.50 (.413) 90 30 MOD. NO 3641NF 3644NF* 3645NF 3646NF 3647NF 3648NF 3649NF Handle pos. (see dwg.) : III 12.00DIAx0.75 SI (.472DIAx0.75 IS) 2 5 3 6 21.50 (.846) * Function 4: SP in DP case see specs. for 600H - 600 NH series. Solder lug/quick-connect terminals - single pole 17.50 (.689) 10.50 (.413) 24.60 (.968) 9.20 (.362) 90 I 2-1 II 2-3 1 II III III 4 I 35.00 (1.378) OFF ON ON MOM MOM ON 6.35x0.80 (.25x.031) CIRCUIT ON MOM ON MOM OFF ON OFF ON OFF 30 MOD. NO 3631NF/2 3635NF/2 3636NF/2 3637NF/2 3638NF/2 3639NF/2 Handle pos. (see dwg.) : 12.00DIAx0.75 SI (.472DIAx0.75 IS) 2 5 3 6 21.50 (.846) Solder lug/quick-connect terminals - double pole 17.50 (.689) OFF ON ON ON MOM MOM ON I 2-1 5-4 II 2-3 5-6 III * Function 4: SP in DP case see specs. for 600H - 600 NH series. 10.50 (.413) 24.60 (.968) 9.20 (.362) 90 1 4 I 35.00 (1.378) CIRCUIT ON ON ON MOM ON MOM OFF ON OFF ON OFF II III 12.00DIAx0.75 SI (.472DIAx0.75 IS) 6.35x0.80 (.25x.031) MOD. NO 3641NF/2 3644NF/2* 3645NF/2 3646NF/2 3647NF/2 3648NF/2 3649NF/2 Handle pos. (see dwg.) : 30 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 90 2 5 3 6 21.50 (.846) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A81 A New ! 3500 SERIES - MILITARY STYLE SEALED TOGGLE SWITCHES FEATURES Sealed to withstand 1 bar pressure at front panel & 0.1 bar pressure total immersion. SPDT & DPDT panel mtg. models with 15/32 32NS (11.90 32NS) threaded bushing. Approved to European standards CECC 96000. Numerous lever styles, including locking types. SPECIFICATIONS Contact ratings : Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Torque: Moisture resistance: See table on next page 10 milliohms maximum at 1A 2VDC 1000 megohms min. 2500 V rms min. - between terminals 3000 V rms min. - between terminals and frame 40,000 cycles at full load. -40C to +85C 2 Nm (1.47 ft.lb.) max. applied to nut 56 days MATERIALS Contacts : Actuator: Bushing & cover: Case: Terminal seal: Case & actuator seal: Silver cadmium oxide alloy Chrome or nickel plated brass Zamac Mineral filled polyester, UL94-VO Molded-in inserts Silicone rubber AGENCY RECOGNITION CECC 92601-004 Availability: Consult factory for details of recognized models. Marking: To order switches marked CECC, complete the appropriate box of the ordering format ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. Terminals & panel cut-outs c. 'build your own switch' order format d. Options & miscellaneous SWITCH CROSS SECTION A82 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE A New ! 3500 SERIES - MILITARY STYLE SEALED TOGGLE SWITCHES A CONTACT RATINGS AND GENERAL PERFORMANCE According to UL1054, CSA22.2 According to CEE24, IEC65 Direct current ON-OFF & ON-ON 6,000 cycles, T65C 20A, 125VAC, 3/4HP 15A 250VAC, 1.5HP T5, 115VAC, 50/400Hz 10,000 cycles, T55C 20(9)A 125VAC 15(6)A 250VAC 15/150A 250VAC 10,000 cycles, T20C 15A 28VDC resistive 10A 28VDC inductive 5A 28VDC lamp load ON-OFF-ON 6,000 cycles, T65C 18A, 125VAC, 1/2HP 10A 250VAC, 1/2HP T2, 115VAC, 50/400Hz 10,000 cycles, T55C 15(6)A 125VAC 10(4)A 250VAC 10/150A 250VAC 10,000 cycles, T20C 10A 28VDC resistive 8A 28VDC inductive 3A 28VDC lamp load OTHER FUNCTIONS 6,000 cycles, T65C 15A, 125VAC 10A 250VAC T2, 115VAC, 50/400Hz 10,000 cycles, T55C 15A 125VAC 10A 250VAC 10/150A 250VAC 10,000 cycles, T20C 10A 28VDC resistive 8A 28VDC inductive 3A 28VDC lamp load Single pole 11.90 32NS (15/32 32NS) II I A1-A2 3531021N000 3536021N000 3537021N000 3538021N000 3539021N000 3531001N000 3536001N000 3537001N000 3538001N000 3539001N000 ON ON MOM ON ON OFF OFF OFF OFF ON MOM MOM ON Above listed models have standard bat lever (1) with bright nickel finish (N). Model shown in photo has flatted lever (3) with satin chrome finish (B). Double pole III 15.00 (.591) 32.00 (1.26) III A2-A3 II A 11.40 (.449) Screw terminals I 10,000 cycles 16A 250 VAC 15A 32 VDC 31.40 (1.236) Solder lug/ quick-connect According to CECC 96201-004 17.50 (.689) Keyway A1 A3 A2 10.00 (.393) A A 10.00 (.393) 2 POS POS. 22 3 POS POS. 30 A 11.90 32NS (15/32 32NS) I II III III A2-A3 II I A1-A2 3541021N000 3546021N000 3547021N000 3548021N000 3549021N000 3541001N000 3546001N000 3547001N000 3548001N000 3549001N000 ON ON MOM ON ON OFF OFF OFF OFF ON MOM MOM ON 31.40 (1.236) Screw terminals TERMINALS Screw Sold.lug/Quick-conn. A2 B4 A1 23.00 (.905) A2 1.80 (.07) 11.00 (.433) A A 10.00 10.00 (.393) (.393) 12.50 DIA (.492 DIA) 12.50 DIA (.492 DIA) 2 POS. POS 22 3 POS. POS 30 12.50 DIA (.492 DIA) 10.80 (.425) 3.50 DIA (.137 DIA) Quick-connect 5.10 (.200) 6.35x0.80 (.25x.031) Fig. 1 9.60 (.377) 10.80 (.425) 6.35x0.80 (.25x.031) B5 PANEL CUT-OUTS (see mounting accessories at end of section) 3.10DIA (.122DIA) 3.50DIA (.137DIA) A3 A1 A3 Above listed models have standard bat lever (1) with bright nickel finish (N) and screw terminals (0). Model shown in photo has standard bat lever (1) with matte black finish (G) on lever & bushing, and standard quick-connect terminals. B6 32.00 (1.26) Solder lug/ quick-connect 11.40 (.449) 17.50 (.689) Keyway 4.50 (.177) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE FUNCTIONS 1.70 (.066) Fig. 2 Fig. 3 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A83 New ! 3500 SERIES - MILITARY STYLE SEALED TOGGLE SWITCHES Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Number of poles Electrical functions Terminals 3 5 3 Single pole 4 Double pole 1 2 3 4 4 4 4 4 4 5 6 7 8 9 0 0 0 1 2 3 4 5 6 0 0 0 0 0 ON ON OFF ON ON MOM ON ON MOM ON ON MOM ON ON ON(3-4) ON(3-4) ON(3-4) ON(1-6) ON(1-6) ON(1-6) OFF OFF OFF OFF m.OFF MOM ON* MOM* MOM* ON* MOM* MOM* MOM ON MOM MOM ON 0 2 3 Screw Solder lug/quick-connect Standard quick-connect * - Function 4 is for double pole only terminals connected indicated (see drawings) Options: Lever styles 1 2 3 4 5 Lever finish Std'd. length 17.5mm (.688") or locking, length 20mm (.787") Length 30mm (1.181") Flatted, length 24mm (.944") Length 40mm (1.574") Length 50mm (1.968") ** - includes matte black on bushing Locking lever styles Agency recognition 0 A B D E F G H J 0 1 No locking Locked in 3 positions Locked in ctr. & keyway side Locked out of ctr. position Locked in ctr. position Locked in side opposite keyway Locked in keyway side Locked out of ctr.& keyway side Locked out of ctr. & side opposite keyway K Locked in ctr. & side opp. keyway L Locked out of keyway side M Locked out of & into side opposite keyway N Locked out of side opp. keyway P Locked out of & into keyway side Locking lever special finish (NONE) P 5 Painted yellow A 6 Anodized red This option is for lever finish C only. None CECC (consult factory for others). 0 2 2 hex nuts, 1 locking ring & 1 lockwasher 2 hex nuts & 1 sealing washer N Bright nickel B Satin chrome G** Matte black F** Matte black w/ fluorescent tip (lever style 1 only) C Painted or anodized T Sulphamate gray Example of completely specified model number: 3531001NA00 A84 Mounting Accessories Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE A New ! 3500 SERIES - MILITARY STYLE SEALED TOGGLE SWITCHES A OPTIONS & MISCELLANEOUS LEVER STYLES Security Guards available - see Miscellaneous & Accessories section D. 7.00DIA (.275DIA) 6.00DIA (.236DIA) 20.00 (.787) 25.00 (.984) 30.00 (1.181) 24.00 (.944) 17.50 (.688) 20.00 (.787) 30.00 (1.181) 15.00 (.59) 6.00DIA (.236DIA) 1 Standard 2 3 4 5 LEVER FINISH N Standard B Satin chrome G* Matte black C Painted or anodized T Sulphamate gray LOCKING LEVER STYLES F* Matte black with fluorescent tip (lever style 1 only) * - Includes matte black finish on bushing 0 - No locking 20.00 (.787) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 7.00DIA (.275DIA) 11.00DIA (.433DIA) 7.00DIA (.276DIA) A B D E F G Locked in 3 positions Locked in center and in keyway side Locked out of center position Locked in center position Locked in side opposite keyway Locked in keyway side H J K L M N P Locked out of center and keyway side Locked out of center and side opp. keyway Locked in center and side opposite keyway Locked out of keyway side Locked out of and into side opposite keyway Locked out of side opposite keyway Locked out of and into keyway side AGENCY RECOGNITION 0 NONE 1 CECC MOUNTING ACCESSORIES 0 For non-sealed mounting (see panel cut-outs Fig. 1, 2 or 3): 2 hex nuts 14mm (.551") across flats, 1 locking ring U121 or U12, 1 lockwasher U13. (See hardware section of catalog). Panel thickness: 5mm (.196") max. 2 For sealed mounting (see panel cut-out Fig. 2): 2 hex nuts 14mm (.551") across flats and 1 sealing washer U60. (See hardware section of catalog). LOCKING LEVER SPECIAL FINISH (for lever finish C above only) (Blank) None P5 Painted yellow A6 Anodized red SCHEMATICS FOR FUNCTION 4 MODELS 6 Below diagrams are viewed from bottom of switch. 6 6 5 III 4 Other colors on request 5 II 5 I 4 4 S.4 I E 3 6 9 12 3 6 9 12 3 6 9 12 2 5 8 11 2 5 8 11 2 5 8 11 1 4 7 10 1 4 7 10 1 4 7 10 5 S.1 II S.3 III S.10I TH E 11 S.7 II S.9 III Equivalent to single pole 3 throw switch. Dotted lines between terminals 2 & 6 and 8 & 12 indicate external jumpers to be added by customer. APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A85 FEATURES Motor load and power ratings. Single, double & three pole models with nickel plated brass or insulated actuators. Locking actuator options for single & double poles. SPECIFICATIONS Contact ratings (resistive loads): Maximum approved ratings: Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life at full load: Operating temperature range: Functions ON-OFF and ON-ON: 15A 250VAC or 10A 24VDC Functions ON OFF ON: 15A 250VAC Other functions: 12A 250VAC, 15A 125VAC or 5A 25VDC UL/CSA: SP, DP & 3P function ON-ON & 3P function ON-OFF - 15A 1/2HP 125/250 VAC. Other functions 10A 1/2HP 125/250VAC VDE: 600NH SP & DP functions ON-ON & ON-OFF - 10(4)A 400VAC, grounding lug ring, p/n U187 required (order separately). 10 milliohms maximum 1000 megohms min. at 500 VDC 2000 V rms min. - between terminals 2500 V rms min. - between terminals and frame 10,000 cycles minimum -20C to +55C MATERIALS Contacts: Actuator: Bushing: Housing: Case: Hardware: Silver/nickel alloy 600H: nickel plated brass 600NH: black polyamide Nickel plated brass Stainless steel or tin plated steel Melamine/polyester 600H models are supplied with 1 Hex Nut p/n U166 & 1 Knurled Nut p/n U411. 600NH models are supplied with 1 Hex Nut U166 & 1 black Knurled Nut p/n U522. See hardware section of catalog. AGENCY RECOGNITION UL & CSA: 600H. VDE, UL & CSA: 600NH. Recognition markings are standard. ABOUT THIS SERIES ALSO IN THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Option drawings & special options d. Miscellaneous Switches for peak currents for switching power supplies, DC-DC converters, motors, etc. See specifications on last page of completely specified models. A86 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 600H & 600NH SERIES - POWER TOGGLE SWITCHES A 600H & 600NH SERIES - POWER TOGGLE SWITCHES A Single pole - nickel plated brass actuator II 10.00 (.433) 14.00 (.551) 29.50 (1.161) 14.90 (.586) 1 2 3 III I 2-3 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 7.10 (.279) III 2-1 OFF ON ON MOM MOM ON 15.00 (.59) 0.80 (.031) ON MOM ON MOM OFF ON OFF ON OFF 10.50 (.413) 36 631H/2 631H 635H/2 635H 636H/2 636H 637H/2 637H 638H/2 638H 639H/2 639H Handle position (see dwg.) : Terminals connected: 17.50 (.689) CIRCUIT II Keyway Double pole - nickel plated brass actuator CIRCUIT 17.50 (.689) OFF ON MOM MOM ON ON MOM MOM ON I 2-3 5-6 10.50 (.413) 21.40 (.846) 11.00 (.433) 21.50 (.846) 29.70 (1.169) 14.65 (.578) III 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) A1 B4 A2 B5 A3 B6 6.80 (.267) ON ON ON ON ON MOM ON MOM ON MOM OFF ON OFF ON OFF III II 2-1 5-4 30 641H/2 641H 644H/2* 644H* 644H/21R* 644H1R* 644H/22R* 644H2R* 645H/2 645H 646H/2 646H 647H/2 647H 648H/2 648H 649H/2 649H Handle position: Terminals connected: 0.80 (.031) SCREW TERMS. II SOLDER LUG I 11.00 (.433) Keyway * Function 4: SP in DP case. See info. at end of section. Three pole - nickel plated brass actuator 34.50 (1.358) 11.00 (.433) 31.80 (1.252) 14.90 (.586) OFF ON ON MOM MOM ON I 2-3 5-6 8-9 24.00 (.949) 1 4 7 2 5 8 6 3 III 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 7.10 (.279) ON MOM ON MOM OFF ON OFF ON OFF III II 2-1 5-4 8-7 11.20 (.44) 26 651H/2 651H 655H/2 655H 656H/2 656H 657H/2 657H 658H/2 658H 659H/2 659H Handle position: Terminals connected: 17.50 (.689) CIRCUIT 0.80 (.031) SCREW TERMS. II SOLDER LUG I 12.00 (.472) 9 12.00 (.472) Keyway Single pole - insulated actuator 13.50 (.531) SCREW TERMS. 15.00 (.59) 11.00 (.433) 14.00 (.551) CIRCUIT III 2-1 II I 2-3 I 1 II 29.50 (1.161) OFF ON ON MOM MOM ON 15.00 (.59) ON MOM ON MOM OFF ON OFF ON OFF 2 3 III 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 7.10 (.279) 631NH/2 631NH 635NH/2 635NH 636NH/2 636NH 637NH/2 637NH 638NH/2 638NH 639NH/2 639NH Handle position (see dwg.) : Terminals connected: 11.50 (.453) 0.80x6.35 (.031x.25) SOLDER LUG 36 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SCREW TERMS. I SOLDER LUG Keyway APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A87 600H & 600NH SERIES - POWER TOGGLE SWITCHES A Double pole - insulated actuator 21.50 (.846) 11.00 (.433) II 29.70 (1.169) I A1 B4 A2 B5 A3 B6 III 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) * Function 4: SP in DP case. See info. at end of section. 11.00 (.433) Keyway Three pole - insulated actuator 13.50 (.531) SCREW TERMS. 11.00 (.433) 24.00 (.949) 34.50 (1.358) CIRCUIT 1 4 7 2 5 8 II 31.80 (1.252) I 14.90 (.586) OFF ON ON MOM MOM ON I 2-3 5-6 8-9 III 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 7.10 (.279) ON MOM ON MOM OFF ON OFF ON OFF III II 2-1 5-4 8-7 0.80x6.35 (.031x0.25) 651NH/2 651NH 655NH/2 655NH 656NH/2 656NH 657NH/2 657NH 658NH/2 658NH 659NH/2 659NH Handle position: Terminals connected: 11.20 (.44) 26 SOLDER LUG 3 12.00 (.472) 6 12.00 (.472) 9 Keyway 600SH & 600SNH - switches for peak currents - up to 150 Amps at 250 VAC Contacts: Silver cadmium oxide Capacitive load ratings: 15/150A 125VAC & 250VAC - 5,000 cycles 10/150A 125VAC & 250VAC - 10,000 cycles 4/90A (10ms) 60VDC - 10,000 cycles Motor load ratings: (note: 15(6)A 250VAC= 15A resistive and 6A motor) 15(6)A 250VAC - 10,000 cycles 10(4)A 380VAC - 10,000 cycles 17(6)A 125VAC - 6,000 cycles 1 HP 250VAC - 10,000 cycles 2 HP 250VAC - 6,000 cycles 1/2 HP 125VAC - 6,000 cycles Lamp load ratings: 10A 125VAC & 250VAC - 10,000 cycles Other specs. & dimensions: Same as 600H & 600NH models previously described. Compatible with options T, G, K, 1V, 2V & 3V. Single and double pole models are UL approved (3/4 HP 125VAC) Also see 'Switches for Peak Currents' technical page in rear of catalog. SCREW TERMINALS WITH CLAMP SINGLE POLE SOLDER LUG QUICKCONNECT TERMINALS 631SH 636SH DOUBLE POLE 641SH 646SH THREE POLE 651SH 656SH 631SH/2 636SH/2 ON ON - OFF ON 641SH/2 646SH/2 ON ON - OFF ON 651SH/2 656SH/2 ON ON - OFF ON CIRCUIT Above models have nickel plated brass actuator. For insulated actuator, replace 'SH' in above model numbers with 'SNH'. A88 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE OFF ON MOM MOM ON ON MOM MOM ON I 2-3 5-6 21.50 (.846) 14.70 (.579) ON ON ON ON ON MOM ON MOM ON MOM OFF ON OFF ON OFF III II 2-1 5-4 11.50 (.452) 6.80 (.267) 641NH/2 641NH 644NH/2* 644NH* 644NH/21R* 644NH1R* 644NH/22R* 644NH2R* 645NH/2 645NH 646NH/2 646NH 647NH/2 647NH 648NH/2 648NH 649NH/2 649NH Handle position: Terminals connected: 13.50 (.531) CIRCUIT 0.80x6.35 (.031x.25) SCREW TERMS. 30 SOLDER LUG 600H & 600NH SERIES - POWER TOGGLE SWITCHES A Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Number of poles Electrical functions Actuator and terminals Momentary for function 4 6 3 Single pole 4 Double pole 5 Three pole 1 ON OFF 5 MOM ON 6 ON ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON 4 ON ON ON 4* ON ON MOM 4* MOM ON MOM * specify selection from 'connections/ functions' box also. H Metal actuator, screw terminals H / 2 Metal actuator, solder lug/quick connect style terminals N H Insulated actuator, screw terminals N H / 2 (NONE) 1 R ON ON 2 R MOM ON MOM MOM Insulated actuator, solder lug/quickconnect style terminals Options: Misc. options Locking actuators Example of completely specified model number: (NONE) T High temperature DAP case: -40C to +85 G Matte black finish on actuator, bushing & nuts. Includes option 'T' above. K Front panel sealing with '0'-ring and sealing washer (NONE) 1 V Locking (1 position) 2 V Locking (2 positions) 3 V Locking (3 positions) (see actuator drawings). 644H/21RGK Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. OPTIONS & SPECIAL OPTIONS 1V 1 locked position 2V 2 locked positions 20.40 (.811) 11.90-32NS DIA (15/32''32NS) 11.90 (.468) 11.90-32NS DIA (15/32''32NS) 11.90 (.468) 11.90-32NS DIA (15/32''32NS) Arrow indicates keyway 19.40 (.763) 19.40 (.763) LOCKING ACTUATORS for 1 & 2 pole models 11.90 (.468) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT 3V 3 locked positions SPECIAL OPTIONS T High temperature diallyl phthalate case (-40C to +85C). G Matte black finish on actuator, bushing and nuts. Includes option T above. K Front panel sealing with '0'-ring and sealing washer. Security Guards available - see Miscellaneous & Accessories section D. 1 2 K APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com A89 600H & 600NH SERIES - POWER TOGGLE SWITCHES A OPTIONS & MISCELLANEOUS TERMINALS 3.00x0.50 SI DIA (.118DIAx0.50 IS) 6.35 (.25) 21.00 DIA (.826 DIA) U187 (required for switches used at 600H/2 Solder lug terminals 380VAC - order separately) 0.80 (.031) 6.35 (.25) 6.35x0.80 (.25x.031) 4.50 (.177) 12.20 DIA (.48 DIA) 3.10 DIA (.122DIA) 600H Screw terminals POSITIONS & CONNECTIONS for function 4 switches FUNCTION 4 FUNCTION 41R FUNCTION 42R ON ACTUATOR ON ON MOM ACTUATOR ON ON MOM ON 5-6 ON 2-3 CONTACTS ON 5-6 ON 2-1 MOM 5-6 MOM 2-3 CONTACTS ON 5-6 ON 2-1 CONTACTS MOM ON 5-6 5 -6 MOM ON 2-3 2-1 ON 5-4 ON 2-1 ON 5-4 ON 2-1 ACTUATOR ON MOM MOM 5-4 MOM 2-1 MOM = momentary action WIRING FOR 3 WAY SWITCH for function 4 switches ACTUATOR ON ON ON Equivalent to single pole 3 throw switch. External jumper must be connected between terminals 2 & 6 by customer. 3 3 3 5 1 4 5 5 1 1 4 4 CONTACTS PANEL CUT-OUTS SWITCH ACTION (arrow indicates keyway) 12.20 DIA (.48DIA) 12.50 DIA (.492DIA) 5.10 (.20) 3.50 DIA (.137DIA) 9.60 (.377) 12.20 DIA (.48DIA) 1.70 (.066) 3 A90 2 1 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 0.80 (.031) GROUNDING LUG RING