Patented*
®
1N4933GP thru 1N4937GP
Vishay Semiconductors
for merly General Semiconductor
Document Number 88509 www.vishay.com
27-Feb-02 1
Glass Passivated Junction
Fast Switching Rectifier Reverse V oltage 50 to 600V
Forward Current 1.0A
0.107 (2.7)
0.080 (2.0)
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
DIA.
NOTE:
Lead diameter is for suffix "E" part numbers
0.026 (0.66)
0.023 (0.58)
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol
1N4933GP 1N4934GP 1N4935GP 1N4936GP 1N4937GP
Unit
*Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 V
*Maximum RMS voltage VRMS 35 70 145 280 420 V
*Maximum DC blocking voltage VDC 50 100 200 400 600 V
*Maximum average forward rectified current IF(AV) 1.0 A
0.375" (9.5mm) lead length at TA=75°C
*Peak forward surge current
8.3ms single half sine-wave superimposed on IFSM 30 A
rated load (JEDEC Method)
Typical ther mal resistance (1) RΘJA 55 °C/W
*Operating junction and storage temperature range TJ, TSTG -65 to +175 °C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
*Maximum instantaneous forward voltage at 1.0A VF1.2 V
*Maximum DC reverse current TA=25°C 5.0
at rated DC blocking voltage TA=125°CIR100 µA
*Maximum reverse recovery time at
IF=1.0A, VR=30V trr 200 ns
Typical junction capacitance at 4.0V, 1MHz CJ15 pF
Notes:
(1) Thermal resistance from junction to ambient, and from junction to lead at 0.375”(9.5mm) lead length, P.C.B. mounted
*JEDEC registered values
DO-204AL (DO-41) Features
• Plastic package has Underwriters Laboratories
Flammability Classification 94V-0
• High temperature metallurgically bonded construction
• Capable of meeting environmental standards of
MIL-S-19500
• For use in high frequency rectifier circuits
• Fast switching for high efficiency
• Cavity-free glass passivated junction
• 1.0 Ampere operation at TA=75°C with no ther nal runaway
• Typical IRless than 0.1µA
• High temperature soldering guaranteed:
300°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
Mechanical Data
Case: JEDEC DO-204AL, molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 oz., 0.34 g
Dimensions in inches
and (millimeters)
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602, and brazed-lead assembly by Patent No. 3,930,306
1N4933GP thru 1N4937GP
Vishay Semiconductors
for merly General Semiconductor
www.vishay.com Document Number 88509
227-Feb-02
Ratings and
Characteristic Curves(TA= 25°C unless otherwise noted)
Ambient Temperature (°C)
Fig. 1 — Forward Current
Derating Curves
Average Forward Rectified Current (A)
Fig. 3 — Typical Instantaneous
Forward Characteristics
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
Fig. 4 — Typical Reverse
Characteristics
Fig. 5 — Typical Junction Capacitance
Number of Cycles at 60 HZ
Reverse Voltage (V)
Fig. 2 — Maximum Non-Repetitive
Peak Forward Surge Current
Junction Capacitance (pF)
Fig. 6 — Typical Transient
Thermal Impedance
t, Pulse Duration (sec.)
Typical Thermal Impedance (°CW)
025 50 75 100 125 150 175
0
0.25
0.5
0.75
1.0
110 100
0
10
20
30
40
Peak Forward Surge Current (A)
TJ = TJ max.
8.3ms Single Half Sine-Wave
(JEDEC Method)
0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0.01
0.1
1
10
Pulse Width = 300µs
1% Duty Cycle
TJ = 25°C
020 40 60 80 100
0.01
0.1
1
10
20
110 100
1
10
100
TJ = 25°C
f = 1.0MHZ
Vsig = 50mVp-p
0.01 0.1 110 100
0.1
1
10
100
TJ = 125°C
TJ = 25°C
0.375" (9.5mm) Lead Length
Resistive or
Inductive Load
TJ = 75°C
