Raychem - Electronics OEM Specification Division - Europe Control Drawing 207W213 THRU 264-01 a) Part as supplied. 4 - - -+ J DIA ! b) Part after unrestricted recovery. "0" RING A B \ : K { DIA 8 _ X\ uae 2O7WAXX __ a A Section B-B SECTION A-A Dimensions (in millimetres.) H J JO K M P R U T Jw Hole Torque Part REF MIN MAX MAX EF THREAD #10% 410% 210% AEF 220% DIA Nm Number b a b b b b b b b b b_-#0.5 207W243-01 12 40 4 15.3. 23.0 20 62 49 40 32 4.0 24.0 3 207W223-04 20 19 7 19.5 33.0 30 72 59 40 42 4.8 34.0 8 207W234-01 34 28 42 27.0 46.0 42 87 74 10 58 2.0 47.0 14 207W245-04 45 42 418 32.2 59.5 56 102 89 10 74 3.0 60.5 14 207W256-04 68 64 30 39.0 84.0 80 422 109 10 97 3.0 85.0 16 207W264-04 40 38 15 28.3 54.0 50 95 82 10 66.5 2.5 55.0 41 Recomended maximum panel thickness is 410mm. Copyright (!) Urheberrechte The copyright in this drawing is the property of Raychem Ltd.The drawing is issued on condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Raychem Ltd. Drawn A.LILLEY Checked we Issue 3 Date June 1999 Conforms to ISO Recommendations 3rd Angle Projection Approval (,~ Not to Scale f=+@) Design Cw MKTG M554) Q.A. Iss. Date E.C.R. No. Details of Change 2 May 1989 4920 3 June 1999 207223: CR99-HM-0004 207213: JW was 1.5 Torque was 5Nm (Ordering Information) 207W2*X-*-01/%*-0 t saneesve Slash Number (if required see compatibility chart) Modification number Material Dash Number (see compatibility chart) Base Part Number MATERIAL DASH NUMBER Raychem CCOMPATIBILITY CHART) MATERIAL DESCRIPTION COATING SLASH NUMBER AS SUPPLIED DIMENSIONS ARE FOR UNCOATED PARTS, WHEN COATING IS ADDED, ENTRY DIAMETEAS WILL REDUCE BY 4.5mm MAX. Electronics OEM Division Europe Swindon, Wiltshire, England. Telephone: (01793) 528171 Fax: 573923